The P03-620 upgrades I've made, This fan change made huge difference for my temperatures and noise

124»

Answers

  • billsey
    billsey ACE Posts: 34,645 Trailblazer

    It's so much easier to just replace those four screws, so you don't have to remove the plate.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • RuutAckses
    RuutAckses Member Posts: 2 New User
    edited April 2023

    Many thanks for this guide. I ordered the parts linked here, as well as the replacement m3 screws.

    The install was easy enough, the wipes did a good job of removing the paste, everything went smoothly. I have a Predator Orion 3000 PO3-630 U3E1 - Intel Core i7-12700F.

    I was getting idle temps of 40-45°c and on auto settings in Predator Sense the fans wouldn't react to CPU temps and it would regularly go up to 100°c if I let it.

    Now I'm watching it idle at 30°c and during game play the CPU fan is reacting to temps and ramping up as necessary, which is a massive improvement. The fan noise is a huge impovement, it had made a massive difference.

    I'll replace the front fan next, but I'm already very happy with it.

    FYI: I didn't remove the motherboard, I used the replacement screws into the existing back plate with no issues. It's a simpler task than you think it will be, but definitely worth the time, effort and cost.

  • chugzilla
    chugzilla Member Posts: 729 Seasoned Specialist WiFi Icon

    thats awesome throw up some pics so we can see what ya did and add a fan to the top mount as exhaust it will help.

  • RuutAckses
    RuutAckses Member Posts: 2 New User
    edited April 2023

    After a week with the Noctua installed, I am very happy. It's worth stating - the stock Frostbite fans don't respond to PWM from Acer's own Predator Sense software. You will see temps of 100°c and your CPU package will throttle or cook. Replace those fans with something decent, and you'll solve this. Also, you do not have to remove the mainboard. The bracket already installed, with longer M3 screws is perfectly fine.

    I have a much quieter PC, and I'm watching it now - after playing a game for over an hour with Predator Sense running, the front, back, CPU and GPU fans are all ramping up and dialing down nicely, maintaining sensible temperatures. It's how it should be fresh out of the box, but the Acer fans are garbage.

    I just ordered another Noctua as a replacement front fan. The Noctuas are running slower, more efficiently and way quieter.

    Before I did the swap, I explored the alternate Predator Sense configurations that other posts have shown - the ones where you edit feature.ini in C:\ProgramData\OEM\PredatorSense\. Mine was already on the correct version, so changing the 'type=' didn't help. What mine didn't have was the mobile option, where you can pair your phone through an app to control the fans remotely.

    In my feature.ini the line [MobileSupport] was set to =0. I changed it to =1 and restarted the Predator Sense software and now I have a mobile phone icon in the software.

    Click that, and I can turn on pairing mode. I downloaded the Predator Sense app from the IOS app store (other versions exist) and I scanned the QR code with the app.

    (I coloured over the QR code because internet.)


    …and that's my iPhone controlling the fans on my Acer Predator Orion 3000 that didn't come with the option.

    Bonus.

  • FJeff
    FJeff Member Posts: 2 New User

    This guide was excellent! Thank you!

    Just upgraded mine to the noctura cpu cooler, works excellent

    One update for the newer models (with lga 1700 socket) would be to use the blue spacers(not black), and use m3x10 or m3x8 screws. I used cap head screws from fastenal.

  • kaizen08
    kaizen08 Member Posts: 2 New User

    Thank you so much for this. Really helpful!

    I have managed to put in a new Noctua exhaust fan and the Noctua NH-U9S cpu fan.

    However…. on predator sense im am noticing spikes in CPU temp. It would be around 45 and then shoot up to 60-70.
    Furthermore, I have no noticed any real benefits yet. Is there anything I could have done wrong or should check?

    I have the Predator PO5-615s

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon

    No real benefits? Temps should be lower and fan noise a lot quieter than before the upgrade. It is possible that the cooler is not evenly tightened on top of the CPU. If the contact is bad temps will suffer.

    How's the CPU temp when you game or run some demanding benchmark? In many cases the original cooler was not adequate to keep the CPU cool enough. When the CPU reaches around 100C the CPU will throttle down as a safety measure, and cause you to lose performance.

  • kaizen08
    kaizen08 Member Posts: 2 New User

    I removed the cooler to ensure that it was evenly tighten, and then applied a pea sized amount of thermal paste. But apart from the fan being quieter, CPU temp was averaging around 80 degrees which was slightly higher than with my cooler master stock CPU fan. And I have noticed that when i am playing games, randomly the game will freeze for a second and then return. Seems really odd.

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon

    Interesting. I don't know what is going on with the freezes. Does it happen with all games or just one particular one? Sometimes when the cooler is screwed too tight it can cause instability and even problems with RAM.

  • FJeff
    FJeff Member Posts: 2 New User
    edited May 2023

    sorry to hear you’re having trouble

    Did you use the blue or black spacers to mount to the motherboard? The guide here indicates black, but for the newer CPU’s (lga 1700) it needs to be the blue ones. They are shorter so you get better cpu contact.


    also did you make sure the mounting bars were in the same holes for each side? It needs to be in the middle of the slots(#2)

    It sounds like you don’t have very good contact between your heatsink and cpu which is causing the issues

  • CeeJeezy
    CeeJeezy Member Posts: 1 New User

    Just done this, my degrees Celsius went down by 20c when normally my games were 80-90c! Thanks for the idea man. So easy to install as well.

  • kasia
    kasia Member Posts: 1 New User
    edited January 16

    I have Acer Predator Orion 3000 PO3-630 with i7-11700f/16GB/RTX3070, and a 2560x1440 screen which I cap at 60fps and I just replaced the CPU cooler to the recommended one (Noctua u9s, I actually used the CHROMAX edition). The main source of noise is now gone. The random fan spikes even during pc being idle are completely gone and unless you're gaming or doing some hard processing work, the fan is super quiet. -For information I used the black caps, and some M3 10 mm flat head screws I bought at local store.

    I just received the exhaust fan as well, also the recommended one but standard version, as CHROMAX was thinner and I didn't like that. Will be attaching it tonight, though I now regret not purchasing both at the same time because now I will struggle with mounting it with the huge CPU cooler beside 😅 I hope to get even better results as the other fans are noticeably noisy as well as you mention, especially when gaming.

    For those interested, I tested current setup (without new exhaust fan yet), with playing Witcher 3. I only can do so on max medium settings and with cap at 60fps, as the noise becomes unbearable beyond that for me, but the temperatures seem alright for this type of game (reminding you this game received next-gen update in 2023 so it actually looks beautiful even on medium settings). Both CPU and GPU hold at around 80-85 degrees Celsius, which is generally considered ok I guess. The fps drop often to around 40-50fps though. Will test with the new fan soon too.

  • dexterize
    dexterize Member Posts: 5 New User

    Hi!

    First of all thanx for the post it was really good.

    I also changed the cpu fan, but I have a problem, I cannot change the rpm of the CPU fan anymore.
    I can run it either on auto or at maximum. Has anyone encountered this problem? You can check my post in here:

    Many thanks!

  • GotBanned
    GotBanned Member Posts: 654 Seasoned Specialist WiFi Icon

    [Just a thought. When the CPU fan spins at full speed, what happens if you use the included low noise adapter? It should lower the speed and noise nicely, but will the cooling be still enough? You'd still be unable to adjust the speed, thou.]

    If the fan can't be controlled via any program, which I kinda doubt, maybe get some manual fan controller/potentiometer?

    Personally my experiecene is limited to the following one. I used it to control 2x 200mm Noctuas (intake). There are many cheaper options out there. If you go this route, just make sure you can power it somehow. Usually they come with a SATA power adaptor.

    Please keep in mind that if you unplug the CPU fan cable from the motherboard, the BIOS might think that there is no fan at all and won't even boot.

    https://noctua.at/en/na-fc1