Windows cloning problem on Acer Aspire 5 A515-51g laptop

YAR1K
YAR1K Member Posts: 18 Troubleshooter

I recently bought an m.2 SSD and was thinking of transferring the system to this SSD. Used Macrium Reflect and later many other programs. It throws an error in all programs, I read that chkdsk helps, I also tried it, but it still gives such an error. On the screen is the Macrium Reflect program.



Answers

  • xperamis
    xperamis Member Posts: 87 Fixer WiFi Icon

    The error is showing because the process you're doing is wrong.

    While cloning You have to select 'All' the partitions that is currently available on your primary hdd/SSD to your new m.2 nvme SSD .

    Just ✅ tick all the partition boxes and try cloning.

    There you go 🤠

    Click on 'Yes' for the question on bottom , if youre happy with my answer❤️

  • xperamis
    xperamis Member Posts: 87 Fixer WiFi Icon

    I'll be more clear to help you.

    Select all the partitions on your current windows os drive.

    Don't select the new SSD now !

    After ticking all the partition on current SSD/hdd , click on 'clone this disk'.

    Then the macrium will ask you , where do you want to clone .

    Then you can click on your new m.2 SSD.

    Then click next and start.

    Wait for finish.

    Click on 'Yes' for the question on bottom , if youre happy with my answer❤️

  • YAR1K
    YAR1K Member Posts: 18 Troubleshooter

    Mark All sections as you said shows insufficient space. But I need to transfer only the system, I need D and E disks on the HDD.


  • StevenGen
    StevenGen ACE Posts: 12,065 Trailblazer

    The AN515-51 can have 1x SATA or PCIe-NVMe M.2 drives and 1x 2.5" SATA3 6GB/s type drive, I don't know how you are cloning and especially connecting these two drives up, as the best, the least problematic way and the fastest way to do a clone is to connect both drives internally in the laptop and use Macrium Reflect. Also and seeing that you are using a Toshiba MQ04ABF100 JUDD1J = 1TB spinner HDD as the source drive, you could have either connection problems if you are using a SATA to USB adaptor or USB port problems cloning the drive, so you have to look at that also or use another software like Acronis True Image and try that as that is specially made for cloning any drives and not like the Samsun Data Migration that is only for Samsung drives.

    Also, remember that Disk 2 Acer SSD RE100 M.2 256GB 5N11611 is not an ideal M.2 drive to clone to as its got very limited performance and its performance is a Max. Sequential Reading Speed (MB/s) of 560 and Max. Sequential Writing Speed (MB/s) of 520 and its not much better than a spinner 2.5" HDD even an 2.5" SSD, it would be much better if you use a PCIe-NVMe M.2 drive like Acer fits into this laptop at 256GB, or I would preferably use a larger boot drive as I would put a min of a 512GB M.2 drive) like these that are fitted to the AN515-51:

    PCIe-NVMe 512GB

    PCIe-NVMe 256GB


  • YAR1K
    YAR1K Member Posts: 18 Troubleshooter

    PCIe-NVMe M.2 does not fit on my laptop. I use Macrium Reflect and it does not clone, now I will try to download Acronis. Acer SSD RE100 M.2 256 GB 5N11611 is still better than the hdd I have now, and I plan to use them together anyway, so I only need the 256 GB for Windows.