INSTALL WINDOWS ON NITRO 5acer nitro 5 an515-52

NITRO512345
NITRO512345 Member Posts: 4 New User
edited September 2022 in Nitro Gaming

Hi everyone , I hope someone can help me

I'm trying to repair or install windows in my acer nitro 5 using usb

Its stuck in acer logo and loading dots .

Please help








( Edited the title to add the model name )

Answers

  • Hi,

    Could you please post the model of your laptop, like AN5xx-xx, also post the Windows version, in the meantime, follow the instructions for a Repair install in the link and see whether it helps.

    https://www.elevenforum.com/t/repair-install-windows-11-with-an-in-place-upgrade.418/

  • wascas
    wascas Member Posts: 1,194 High-End Contributor WiFi Icon

    To repair your laptop, do the following steps.

    1. Create a bootable flash drive with Windows Media Creation Tool.
    2. Enable F12 Boot menu in the BIOS.
    3. Insert USB flash drive, start your computer and begin tapping F12 to enter boot menu. Select USB. When you see the windows screen, click "Repair your computer" on the left side of the screen.
    4. Click "Troubleshoot", "Advanced Options", "Startup-Repair" or try "System Restore".
  • NITRO512345
    NITRO512345 Member Posts: 4 New User

    I can't open any usb boot

    I tried creating bootable recovery drive but it stuck on acer logo and loading dots

    I tried windows installer but its the same . logo with loading screen

    I already tried alt F10 but tuck in Please wait

    I can't open any windows troubleshooting

  • NITRO512345
    NITRO512345 Member Posts: 4 New User

    acer nitro 5 an515-52

  • NITRO512345
    NITRO512345 Member Posts: 4 New User

    I already tried using wintousb . but i can't open my files because its on read only disk

    I tried chkdsk and theres a lot of corrupted files and i can't scan it because its write protect .

    every time i click my hdd its stuck and hang my computer . and when i restart it . its stuck again in acer logo

  • William_mk2
    William_mk2 Ally Posts: 4,084

    @NITRO512345


    I am really sorry for the inconvenience..  Let us do the basic steps first..


    Doing the power drain and bios defaults will really help. Kindly follow the steps given below:


    Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, you can find a pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and – sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer. Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery. Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door. Just below that you can find a latch. If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

     

    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.  Hold the power button for 1 minute. After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn’t bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it’s internal statistics.


    Connect all the cables back and restart the computer.  



    While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear. Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.  

     

    It might also be the issue with battery, charger or power outlet.  Try to use the charger in a different room on a different power outlet. Try to bypass the surge protector and connect it directly to power outlet.  Try to use an alternative charger if possible.  Try to turn on the computer without the charger and check it ( as long as the battery is not drained out )  


    Try windows x 

    go to device manager 

    expand Battery

    right click on all the items below battery – uninstall 

    Restart the computer 

     

    Please check whether it is booting into windows..

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • William_mk2
    William_mk2 Ally Posts: 4,084
    edited September 2022

    @NITRO512345


    If the above options which was mentioned earlier are not working then please read and try the info given below


    Note:


    If you do refresh ( keep my files ) - all your personal files like pictures, music , documents , videos will still be intact.  Only the applications will be lost


    If you do reset ( remove everything ) - you are doing a factory default.  It will become like a day one computer.  It will wipe out everything and take your computer to day one like a new computer. 



    You can also do the recovery in an alternative way..



    There are two alt keys on the keyboard. If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar. The alt key on the right side will be looking like alt, alt gr or alt car. Turn off the computer. Hold the alt key on the left and tap f10 continuously.  It will go to repair mode. It will show you chose an option, continue, troubleshoot.  If it is not going to repair mode, turn off the computer. Turn on the computer. Hold the right alt key ( alt gr or alt car or alt ) and then tap f10 continuously. It will go to chose an option continue and troubleshoot..


    It will show you chose an option, continue, troubleshoot

    Go to troubleshoot - click on reset this pc

    click on keep my files ( only applications will be lost )  chose your account and type your password  - click on local reinstall - click on reset

    It will be in progress 


    If the keep my files option is not working 


    Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset 

    It will reinstall windows. 


    If the just remove my files is not working.. 


    Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset 

    It will reinstall windows. 


    Please try both the alt + f10 and the right side alt key or alt gr + f10 options one by one and check whether it works.


    Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10 or alt gr + tapping f10 on the keyboard while turning on the computer.  Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.  Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • William_mk2
    William_mk2 Ally Posts: 4,084

    @NITRO512345


    If the above options which was mentioned earlier are not working then please read and try the info given below


    My goal is to help you to get into repair mode. It will show you - chose an option, continue, troubleshoot, use a device.


    Different ways of getting into repair mode:


    When you start the computer, once it goes to automatic repair, diagnosing your pc , it will show you something like restart, advanced options. If you click on advanced option, it will go to repair mode where it will show you chose an option, continue, troubleshoot, use a device. If you are not able to get into repair mode, we might have to do a hard reset to get into repair mode.  Turn on the computer.  Once it goes beyond the acer logo, turn off the computer immediately by holding the power button.  Do this for 6 to 7 times.  Turn on the computer.  It will go to repair mode. 


    If it is still not working you have to follow these steps. There are two alt keys on the keyboard. If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar. The alt key on the right side will be looking like alt, alt gr or alt car. Turn off the computer. Hold the alt key on the left and tap f10 continuously.  It will go to repair mode. If it is not going to repair mode, turn off the computer. Turn on the computer. Hold the right alt key ( alt gr or alt car or alt ) and then tap f10 continuously.  It will go to repair mode. 


    Once it goes to repair mode with options like Troubleshoot, chose an option, use a device, continue the you can always try the refresh and reset options.


    If you are not able to get into repair mode, we might have to do a hard reset again to get into repair mode.  Turn on the computer.  Once it goes beyond the acer logo, turn off the computer immediately by holding the power button.  Do this for 6 to 7 times.  Turn on the computer.  It will go to repair mode. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★