Acer Predator Helios 300 enable AHCI mode

Panel
Panel Member Posts: 8

Tinkerer

edited October 2021 in Predator Laptops
I have an Acer Predator Helios 300, I need to enable AHCI mode, what is the procedure?

Answers

  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder
    Should just be control+s on the main Tab , and then changing either RST , sata or vmd mode under one of the other tabs 
  • Panel
    Panel Member Posts: 8

    Tinkerer

    Sorry, I enter the bios (click F2) then CTRL + S?
  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder
    yup yup, after entering the bios as the first thing you press
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Panel,

    In UEFI or BIOS, find SATA settings to select the mode for memory devices. Switch them to AHCI, save settings and restart the computer. After the restart, Windows will start installation of SATA drivers, and when it is over, it will ask you for another restart. Do it, and AHCI mode in Windows will be enabled.
  • Panel
    Panel Member Posts: 8

    Tinkerer

    Ok I have AHCI enabled, thanks.
  • Argumon
    Argumon Member Posts: 23 Networker
    Hm, CTRL-S does nothing. I have a PH315-53. The UEFI does not seem to have any SATA settings. I have the UEFI 1.03.
    Any ideas?
  • r0bertinski
    r0bertinski Member Posts: 3 New User
    Argumon said:
    Hm, CTRL-S does nothing. I have a PH315-53. The UEFI does not seem to have any SATA settings. I have the UEFI 1.03.
    Any ideas?
    I have the same problem than you, in my case I have a BIOS "PH315-52", it seems that they wanna force people to use Windows, very bad idea,