How to set xb273K Sbmiprzx to 144Hz 4K

Kubinb12
Kubinb12 Member Posts: 13

Tinkerer

Cannot find any information on this online, most information is for the GPbmiipprzx version which is resolved by connecting 2 DP cables. This is not the case with the Sbmiprzx version. 
I have:
Set OSD settings to enable 144Hz
Installed latest drivers (NVIDIA and Monitor)
Connected an 8K capable dp cable 
set color to YCbCr422 and 8 bpc in nvidia control panel
Still only get 120Hz as the highest option. 
GPU is 1080ti, all hardware should be capable
Acer support was very useless when I contacted them...

Any help is greatly appreciated!

«1

Answers

  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    >>>GPU is 1080ti, all hardware should be capable>>>

    A laptop or desktop?

    Jack E/NJ

  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    It is a Desktop
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    >>>Still only get 120Hz as the highest option. >>>

    Sorry, specs suggest only the DisplayPort version can be driven to 144Hz. Otherwise 120Hz max. So your results seem consistent.





    Jack E/NJ

  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    Hello, Thank you for your response

    I'm not sure if I was clear in my original post but I am using Display Port and using an 8K capable DP (Display Port) cable. This monitor should be able to do 4k 144Hz with my setup.
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Sorry, you might have to use a display id editor like the Acer display widget to configure it  so the nvidia CP sees more options.  Not sure it'll work with your setup. There are other edid freeware tools that might do the job but I'd try the Acer one first cuz you're messing display firmware.



    Jack E/NJ

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Yes, you have to actively turn on overclocking with the NVIDIA to get the 144Hz refresh. Your Game Ready Driver should support that if the GPU does.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    Thank you for your suggestion however, I tried that as well and still no luck. :-/
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    What did you try?

    Jack E/NJ

  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    Overclocking with NVIDIA control panel, Screen just goes blank when overclocking to 144hz
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    What about the Acer widget results mentioned 2 weeks ago?

    Jack E/NJ

  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    Unfortunately, the Acer widget only allows very limited options to configure my monitor.
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    >>>Overclocking with NVIDIA control panel, Screen just goes blank when overclocking to 144hz>>>

    Resolution set to 3840x2160?

    Jack E/NJ

  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    Yes that is correct, 3840 x 2160
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Still two dp cables?

    Jack E/NJ

  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    The sbmiprzx version only has 1 display port 
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Sorry, I misunderstood. Does your's also have an HDMI port?

    Jack E/NJ

  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    yes it does 1 DP and 1 HDMI
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    This model is newer than the available specsheets. Is there an OSD option to disable Gsync?

    Jack E/NJ

  • Kubinb12
    Kubinb12 Member Posts: 13

    Tinkerer

    There doesnt seem to be an option to disable Gsync, Apparently it should be able to run 144hz with gsync
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    >>>Overclocking with NVIDIA control panel, Screen just goes blank when overclocking to 144hz>>>

    On another different series, gsync had to be disabled to achieve an advertised 166Hz overclock. While I can't seem to find any user reports that the sbmiprzx model actually achieved any higher rates than 120Hz from a single DP source, I guess we also can't be sure that the blank screen at 144Hz is due to the monitor itself or the single DP signal source?

    Jack E/NJ