Aspire TC-330G-A6-9220 it's quite slow (since the first boot up).

So my wife purchased this from Walmart about 1.5 years ago and it's quite slow (since the first boot up).

I can't find the link on Walmart any more but it's this one: https://www.newegg.ca/acer-aspire-tc-tc-330g-ew12-student-home-office/p/1VK-0017-009C9

I've since installed an SSD and have re-installed Windows 10 but it's still slow. Is it because of the CPU or the RAM? It only has 8 GB single channel. Should I throw another 8 GB stick of RAM in there so that it runs in dual-channel? If so, does anyone know which one I should throw in there? I ran CPUz and I know it's DDR 2666 Mhz to the best of my knowledge.

Thank you for everyone's suggestions.

(Thread was edited to add model name to the title)

Accepted answers

William_mk2

gyunit17

Here are some of the steps to speed up your computer.

Try windows + r - on the run window - type msconfig - click ok

click on services

check - hide all microsoft services

click on disable all

click on startup

disable all the startup items

click on apply - ok - restart the computer. Loading process will be very fast now..

Note: You can always enable the services and startup items later or set it to normal startup from selective startup later on the General tab

Try windows + r - on the run window - type appwiz.cpl - click ok

it will show you the list of programs

remove all the unwanted third party programs.

Please don’t remove any drivers.

If you are not sure , please don’t remove it.

Try windows + r - on the run window type temp - click ok - it will show you the bunch of files - try ctrl + a - select all files - press the shift key and click on delete files

Try windows + r - on the run window type %temp% - click ok - It will show you the bunch of files - try ctrl + a - select all files - press the shift key and click on delete files

If you are not able to remove some files - click on skip and then click click on continue..

Try windows + r - on the run window - type cleanmgr - click ok

click on all the boxes except recycle bin and thumnail

Delete the items which are checked

Try windows x - on the menu - chose command prompt admin or power shell admin

click on yes

on the blue or black window type sfc /scannow

It will be running till 100 %

Try to do a chrome reset

open chrome

click on three dots on top right corner

click on settings

Scroll down - go to advanced

click on restore setting to default

you will see reset settings - cancel

click on reset settings

Open chrome

it will work faster now

If it is still not working then we have to do a refresh and reset

click on start - settings - update and security - recovery - reset this pc - get started

or

on start - type here to search - type reset this pc - click on reset this pc on the top - click on get started

It will show you keep my files and remove everything

chose keep my files

chose the account - type the password - click on local reinstall - click on reset

It will be in progress..

login to computer and start using the computer.

If it is still not working

click on start - settings - update and security - recovery - reset this pc - get started

chose remove everything

click on local reinstall - just remove my files - click on reset

It will be in progress

Note:

If you do refresh ( keep my files ) - all your personal files like pictures, music , documents , videos will still be intact. Only the applications will be lost

If you do reset ( remove everything ) - you are doing a factory default. It will become like a day one computer. It will wipe out everything and take your computer to day one like a new computer.

You can also do the recovery in an alternative way..

There are two alt keys on the keyboard. If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar. The alt key on the right side will be looking like alt, alt gr or alt car. Turn off the computer. Hold the alt key on the left and tap f10 continuously. It will go to repair mode. It will show you chose an option, continue, troubleshoot. If it is not going to repair mode, turn off the computer. Turn on the computer. Hold the right alt key ( alt gr or alt car or alt ) and then tap f10 continuously. It will go to chose an option continue and troubleshoot..

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - click on reset this pc

click on keep my files ( only applications will be lost ) chose your account and type your password - click on local reinstall - click on reset

It will be in progress

If the keep my files option is not working

Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset

It will reinstall windows.

If the just remove my files is not working..

Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset

It will reinstall windows.

Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10 or alt gr + tapping f10 on the keyboard while turning on the computer. Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key. Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above.

William_mk2

@gyunit17

Kindly go through the details which is captured from service manual designed for your computer.

Image: https://us.v-cdn.net/6029997/uploads/editor/r8/evyxqquaxrny.png

Image: https://us.v-cdn.net/6029997/uploads/editor/s4/thrfmg6yqz40.png

Image: https://us.v-cdn.net/6029997/uploads/editor/r6/79kbwjfqnarf.png

Image: https://us.v-cdn.net/6029997/uploads/editor/cl/23rkknpr7259.png

Image: https://us.v-cdn.net/6029997/uploads/editor/3z/p4cc5js0ek2e.png

billsey

The Aspire TC-330G models are single channel only.

All comments

GAMING6698

@gyunit17
Click on my link then run that software and install amd radeon software to update your gpu driver
(Just follow screen instructions in this software ↓to install)
https://drivers.amd.com/drivers/installer/19.50/beta/radeon-software-adrenalin-2020-20.4.2-minimalsetup-200423_web.exe

gyunit17

GAMING6698 said:

@gyunit17
Click on my link then run that software and install amd radeon software to update your gpu driver
(Just follow screen instructions in this software ↓to install)
https://drivers.amd.com/drivers/installer/19.50/beta/radeon-software-adrenalin-2020-20.4.2-minimalsetup-200423_web.exe

I'll give this a try. It's not a virus is it LOL?

gyunit17

Hi, happy long weekend and sorry to revive an old thread.

So I installed two 4 GB sticks of RAM that I bought as a pair from Amazon. I am still unable to run them in dual-channel. Is there anything further I need to do?

Thank you in advance.

William_mk2

gyunit17

Here are some of the steps to speed up your computer.

Try windows + r - on the run window - type msconfig - click ok

click on services

check - hide all microsoft services

click on disable all

click on startup

disable all the startup items

click on apply - ok - restart the computer. Loading process will be very fast now..

Note: You can always enable the services and startup items later or set it to normal startup from selective startup later on the General tab

Try windows + r - on the run window - type appwiz.cpl - click ok

it will show you the list of programs

remove all the unwanted third party programs.

Please don’t remove any drivers.

If you are not sure , please don’t remove it.

Try windows + r - on the run window type temp - click ok - it will show you the bunch of files - try ctrl + a - select all files - press the shift key and click on delete files

Try windows + r - on the run window type %temp% - click ok - It will show you the bunch of files - try ctrl + a - select all files - press the shift key and click on delete files

If you are not able to remove some files - click on skip and then click click on continue..

Try windows + r - on the run window - type cleanmgr - click ok

click on all the boxes except recycle bin and thumnail

Delete the items which are checked

Try windows x - on the menu - chose command prompt admin or power shell admin

click on yes

on the blue or black window type sfc /scannow

It will be running till 100 %

Try to do a chrome reset

open chrome

click on three dots on top right corner

click on settings

Scroll down - go to advanced

click on restore setting to default

you will see reset settings - cancel

click on reset settings

Open chrome

it will work faster now

If it is still not working then we have to do a refresh and reset

click on start - settings - update and security - recovery - reset this pc - get started

or

on start - type here to search - type reset this pc - click on reset this pc on the top - click on get started

It will show you keep my files and remove everything

chose keep my files

chose the account - type the password - click on local reinstall - click on reset

It will be in progress..

login to computer and start using the computer.

If it is still not working

click on start - settings - update and security - recovery - reset this pc - get started

chose remove everything

click on local reinstall - just remove my files - click on reset

It will be in progress

Note:

If you do refresh ( keep my files ) - all your personal files like pictures, music , documents , videos will still be intact. Only the applications will be lost

If you do reset ( remove everything ) - you are doing a factory default. It will become like a day one computer. It will wipe out everything and take your computer to day one like a new computer.

You can also do the recovery in an alternative way..

There are two alt keys on the keyboard. If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar. The alt key on the right side will be looking like alt, alt gr or alt car. Turn off the computer. Hold the alt key on the left and tap f10 continuously. It will go to repair mode. It will show you chose an option, continue, troubleshoot. If it is not going to repair mode, turn off the computer. Turn on the computer. Hold the right alt key ( alt gr or alt car or alt ) and then tap f10 continuously. It will go to chose an option continue and troubleshoot..

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - click on reset this pc

click on keep my files ( only applications will be lost ) chose your account and type your password - click on local reinstall - click on reset

It will be in progress

If the keep my files option is not working

Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset

It will reinstall windows.

If the just remove my files is not working..

Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset

It will reinstall windows.

Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10 or alt gr + tapping f10 on the keyboard while turning on the computer. Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key. Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above.

William_mk2

gyunit17

I would like to provide some additional info which will really help you.

Kindly go through the details given below. The info provided below will be very helpful to get the current memory and ssd details of your computer and the options to upgrade it.

Please visit the website given below. There is an option to "start your scan " and " select your computer " . Please chose the options and try it. It will show you the memory and SSD’s details and the best upgrade options for you..

https://www.crucial.com/

It will tell you what you currently have and what you can add for memory and SSD's.

Note: If you decide to buy you can always compare the prices by visiting other websites or stores and then you can decide. We are providing the info of scan app just to show you the upgrade options. You can even download similar scan apps from other memory upgrade websites too.

To check the compatibility of ram which you can use on your computer.. Get CPUz and check it with that in SPD section of all the RAM and specs that you have, its a quick and simple way to check all OEM specs and what you have in your system.

William_mk2

@gyunit17

Kindly go through the details which is captured from service manual designed for your computer.

billsey

The Aspire TC-330G models are single channel only.

ttttt

@gyunit17

Do you have the same model as the member who started this thread?

How about start your own new thread by clicking the "Ask a Question" green button at upper right hand corner of this page after sign-in?

Are you still using mechanical HDD as the boot drive? If so, it will be slow for sure.

gyunit17

William_mk2 said:

gyunit17

Here are some of the steps to speed up your computer.

Try windows + r - on the run window - type msconfig - click ok
click on services
check - hide all microsoft services
click on disable all
click on startup
disable all the startup items
click on apply - ok - restart the computer. Loading process will be very fast now..

Note: You can always enable the services and startup items later or set it to normal startup from selective startup later on the General tab

Try windows + r - on the run window - type appwiz.cpl - click ok
it will show you the list of programs
remove all the unwanted third party programs.
Please don’t remove any drivers.
If you are not sure , please don’t remove it.

Try windows + r - on the run window type temp - click ok - it will show you the bunch of files - try ctrl + a - select all files - press the shift key and click on delete files

Try windows + r - on the run window type %temp% - click ok - It will show you the bunch of files - try ctrl + a - select all files - press the shift key and click on delete files

If you are not able to remove some files - click on skip and then click click on continue..

Try windows + r - on the run window - type cleanmgr - click ok
click on all the boxes except recycle bin and thumnail
Delete the items which are checked

Try windows x - on the menu - chose command prompt admin or power shell admin
click on yes
on the blue or black window type sfc /scannow
It will be running till 100 %

Try to do a chrome reset
open chrome
click on three dots on top right corner
click on settings
Scroll down - go to advanced
click on restore setting to default
you will see reset settings - cancel
click on reset settings
Open chrome
it will work faster now

If it is still not working then we have to do a refresh and reset

click on start - settings - update and security - recovery - reset this pc - get started

or

on start - type here to search - type reset this pc - click on reset this pc on the top - click on get started

It will show you keep my files and remove everything
chose keep my files
chose the account - type the password - click on local reinstall - click on reset
It will be in progress..
login to computer and start using the computer.
If it is still not working

click on start - settings - update and security - recovery - reset this pc - get started
chose remove everything
click on local reinstall - just remove my files - click on reset
It will be in progress

Note:

If you do refresh ( keep my files ) - all your personal files like pictures, music , documents , videos will still be intact. Only the applications will be lost

If you do reset ( remove everything ) - you are doing a factory default. It will become like a day one computer. It will wipe out everything and take your computer to day one like a new computer.

You can also do the recovery in an alternative way..

There are two alt keys on the keyboard. If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar. The alt key on the right side will be looking like alt, alt gr or alt car. Turn off the computer. Hold the alt key on the left and tap f10 continuously. It will go to repair mode. It will show you chose an option, continue, troubleshoot. If it is not going to repair mode, turn off the computer. Turn on the computer. Hold the right alt key ( alt gr or alt car or alt ) and then tap f10 continuously. It will go to chose an option continue and troubleshoot..

It will show you chose an option, continue, troubleshoot
Go to troubleshoot - click on reset this pc
click on keep my files ( only applications will be lost ) chose your account and type your password - click on local reinstall - click on reset
It will be in progress

If the keep my files option is not working

Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset
It will reinstall windows.

If the just remove my files is not working..

Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset
It will reinstall windows.

Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10 or alt gr + tapping f10 on the keyboard while turning on the computer. Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key. Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above.

Hi,

Your suggestions for disabling some of the programs at Startup helped a lot. Thanks for your help!

gyunit17

billsey said:

The Aspire TC-330G models are single channel only.

Wonderful, that explains a lot, thank you!

gyunit17

William_mk2 said:

@gyunit17

Kindly go through the details which is captured from service manual designed for your computer.

This was really good thank you!

gyunit17

ttttt said:

@gyunit17

Do you have the same model as the member who started this thread?

How about start your own new thread by clicking the "Ask a Question" green button at upper right hand corner of this page after sign-in?

Are you still using mechanical HDD as the boot drive? If so, it will be slow for sure.