Boot problems with Acer Aspire ES1-531-C7Q1

storfot51
storfot51 Member Posts: 24 Troubleshooter
After intalation of Linux Mint 20.3 Cinnamon, the Aver will not Boot.
It commes to the ACER logo with Reset system up in left corner. It goes in a loop. Hvat is wrong?

Best Answers

  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    Answer ✓
    Try booting up again while tapping F12 key. Choose Linpus.


    Jack E/NJ

  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    Answer ✓
    I installed Linux Mint 20.3 over again. Then I changed to Linpus , but did not work. Then F12 again and changed to ubuntu again, NOW IT WORKED. THANK YOU FOR ALL HELP!
    HALLELUJA! :D
«1

Answers

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi @storfot51,

    After the installation, use Advanced Options ‣ Recovery mode from the boot menu and choose resume .
  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    Sorry my silly question, where do I do that ?

  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    I did not see that alternative.

  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    Did you try to install  Mint in dual boot mode?

    Jack E/NJ

  • BND
    BND Member Posts: 72 Devotee WiFi Icon
    If you did so, I suggest you to use a live USB with refind in order what EFI you can see and try to boot with one these files
  • BND
    BND Member Posts: 72 Devotee WiFi Icon
    reFind is a linux application allowing you to see the EFI files on your system, and you can choose the file you want to boot with. 
  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    I first tried to install with dual boot LM20. besides Windows 10.  I tried every suggestion I have seen at Acer Forum and Linux Mint Forum without any success. Then I have used a installation with erasing the harddisk..
    reFind seem to bee complicated.
  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    If you posted a thread on the Mint forums please reveal the link so I can see any responses that you got. The Mint iso installation USB  must GPT partition scheme (not MBR) FAT32 format using Rufus. The original Windows installation must have been 64-bit. 

    Jack E/NJ

  • padgett
    padgett ACE Posts: 4,532 Pathfinder
    Also you may need to add the UEFI signature to the BIOS dictionary. What do you get on a F12 boot ? (dual boot with Kali shown).


  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    >>>Then I have used a installation with erasing the harddisk..>>>

    The Mint option to wipe Windows was selected. It can no longer be dual boot. And might even be MBR partitioned now if the Mint iso USB stick wasn't prepared properly with Rufus. That can be tested by changing BIOS to legacy mode.

    Jack E/NJ

  • Jane_Doe
    Jane_Doe Member Posts: 2 New User
    Actually, I have also the same problem with me After intalation of Linux Mint 20.3 Cinnamon, Let me know as well if you got any solution. Seems like you didn't found any solution  :)
  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    I used ETCHER to create bootable USB. I have only LM on my two pc's.
  • Jane_Doe
    Jane_Doe Member Posts: 2 New User
    Same issue with me please let me know, If Any solution.
  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    My boot options, F12,
  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    Here is my BIOS and Boot option and pc info.
  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    Boot from the Mint USB installation stick. Then run GPartEd either from the Mint menu or terminal command prompt. Select Seagate HDD #3. Probably sda. Post phone photo of result if possible.






    Jack E/NJ

  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    This came up on GGParted.
  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    Click dropdown. Anything other than sdb or sdc thumbdrive?


    Jack E/NJ

  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    No other than sda and sdb .
  • storfot51
    storfot51 Member Posts: 24 Troubleshooter
    sending you picture of the screen