Replacing Orion 3000 PO3-600 cooler I don't know if it is compatible

S4chi3
S4chi3 Member Posts: 1 New User
edited December 2022 in Predator Desktops
Hi, have an orion 3000 PO3-600, can i replace my  cpu cooler to liquid cooler? because I dont know if it is compatible. 

[Edited the thread to add issue detail]

Answers

  • StevenGen
    StevenGen ACE Posts: 12,155 Trailblazer
    edited September 2021
    S4chi3 said:
    Hi, have an orion 3000 PO3-600, can i replace my  cpu cooler to liquid cooler? because I dont know if it is compatible. 
    You can, first measure your internal case spaces that you have? One of the options are the Cooler Master MASTERLIQUID ML120L V2 RGB which is a New generation dual chamber pump enlarged surface area on radiator with the new SickleFlow 120 RGB reinforced sealing for anti-leaking prevention that takes minimal space for water cooling. Look at these sorts of water cooling options as there are many setups available similar to this. Otherwise and a better OEM upgrade fan option for your PO3-600 is the NOCTUA NH-U9S  which is a premium-quality quiet CPU cooler fan that fits straight into the OEM CPU space of your desktop. 

    Cooler Master MASTERLIQUID ML120L V2 RGB


    NOCTUA NH-U9S CPU FAN



  • tanga
    tanga Member Posts: 8

    Tinkerer

    StevenGen said:
    S4chi3 said:
    Hi, have an orion 3000 PO3-600, can i replace my  cpu cooler to liquid cooler? because I dont know if it is compatible. 
    You can, first measure your internal case spaces that you have? One of the options are the Cooler Master MASTERLIQUID ML120L V2 RGB which is a New generation dual chamber pump enlarged surface area on radiator with the new SickleFlow 120 RGB reinforced sealing for anti-leaking prevention that takes minimal space for water cooling. Look at these sorts of water cooling options as there are many setups available similar to this. Otherwise and a better OEM upgrade fan option for your PO3-600 is the NOCTUA NH-U9S  which is a premium-quality quiet CPU cooler fan that fits straight into the OEM CPU space of your desktop. 

    Cooler Master MASTERLIQUID ML120L V2 RGB


    NOCTUA NH-U9S CPU FAN


    Would you mount the fan at where the rear case fan is. I though only 92mm fit. 
  • frankøww
    frankøww Member Posts: 27 Enthusiast WiFi Icon
    Tak @kolkkaaja for inspiration og tips. Jeg lavede selv samme operation, men Coolermaster masterliquid 120 lite med is. Du skal udskifte disse M3x12mm skruer til iskøleren, som blev fundet i skoven som reol, men ellers passer direkte på plads. Jeg flyttede også wlan-antennerne til den nye stand. Nogle af frontpanellygterne fandt en plads til moderen. Arctic p14 loftet er stadig på lager. CPU'en og Gpu'en spinder nu begge der ved 50c hjørner under belastning. Hvor har @kolkkaaja forresten fået kraften fra radiventilatoren fra?
    20211215_204040_1gif
    • Kan lide
     Reaktioner:banker
  • LINK123
    LINK123 Member Posts: 13

    Tinkerer

    I’d recommend the ZALMAN CNPS 16X air cooler and it’s super cheap and quiet and it’s direct touch heat pipe if you want a liquid cooling solution I recommend ANTEC Kouler H2O 620.