Aspire E 11 E3-111-C9LG not detecting windows 10 from SSD

Madhasuki
Madhasuki Member Posts: 3 New User
I have an SSD that has Windows 10 installed from my old laptop, and I exchanged it with the HDD on the Acer Aspire E 11

So now my Acer Aspire E 11 is using SSD, but when it boots, it shows "No Bootable Device".  I've searched the internet and it says I have to change the BIOS from UEFI to Legacy.  I have done it but it tries to boot from the NIC Adapter, even though I have prioritized booting from the SSD


Answers

  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    Sorry but Windows usually won't boot from an HDD removed from another machine. The  E3 BIOS looks for a hidden partition on the HDD to make sure it matches the Win10 installation on the E3. In this case, it won't match  because Win10 was installed on another machine.

    What brand model was the older Win10 laptop

    Jack E/NJ

  • Madhasuki
    Madhasuki Member Posts: 3 New User
    JackE said:
    Sorry but Windows usually won't boot from an HDD removed from another machine. The  E3 BIOS looks for a hidden partition on the HDD to make sure it matches the Win10 installation on the E3. In this case, it won't match  because Win10 was installed on another machine.

    What brand model was the older Win10 laptop
    I see, so it means that i should to re install the windows?

    Btw, the older win10 laptop is Axioo
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    (1) What was the factory-installed operating system, if any, on the E3-111?
    (2) What was the factory-installed operating system, if any, on the axioo?

    Jack E/NJ

  • Madhasuki
    Madhasuki Member Posts: 3 New User
    JackE said:
    (1) What was the factory-installed operating system, if any, on the E3-111?
    (2) What was the factory-installed operating system, if any, on the axioo?
    1. E3-111 is Windows 8.1
    2. Axioo is actually windows 7 but i re-install to Windows 10
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    It is best to backup copy your personal files from the Axioo HDD onto a USB drive.

    Then install a fresh copy of the latest Win10 onto the HDD inside the E3 in UEFI mode.

    You can use Microsoft's Win10 USB media creation tool to make the latest bootable Win10 installation USB for installing Win10 on the E3. 

    Jack E/NJ