Desk monitor support information predator X34

ALE1967
ALE1967 Member Posts: 7

Tinkerer
edited December 2021 in Predator Monitors
Hi guys, I have an Acer predator ultra wide curved 3440x1440 monitor, I wanted to buy a desk stand, I just can't figure out which is the right one that fits with the attachment behind the monitor, can someone help me?


Best Answers

  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    Answer ✓
    But is it an X34 SBMIIIPHZX, an X34 GSbmiipphuzx or one of the various X34 models not sold in the USA? For both of those it looks like when you remove the four screws that hold the stand to the back the holes match one of the VESA sizes, so any VESA mounting solution would work. Measure to see, they are likely on 100mm centers but might be 75mm. There may have been standoff studs that go there for a VESA mount in the box, but you could replace by stacking some nuts at each hole and using longer screws.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    Answer ✓
    Good to know, please mark the appropriate message as the solution so your thread will rise higher in the searches.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    We need to know which monitor you bought, there are a fair number of them that fit that description. :) What is the model number? Mine, which isn't likely to be the same as yours since mine is several years old, has mounting screw holes on the back to match a VESA mount.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • ALE1967
    ALE1967 Member Posts: 7

    Tinkerer
    The model number is X34
  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    Answer ✓
    But is it an X34 SBMIIIPHZX, an X34 GSbmiipphuzx or one of the various X34 models not sold in the USA? For both of those it looks like when you remove the four screws that hold the stand to the back the holes match one of the VESA sizes, so any VESA mounting solution would work. Measure to see, they are likely on 100mm centers but might be 75mm. There may have been standoff studs that go there for a VESA mount in the box, but you could replace by stacking some nuts at each hole and using longer screws.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • ALE1967
    ALE1967 Member Posts: 7

    Tinkerer
    I bought it years ago on Amazon
  • Commodore_1995#
    Commodore_1995# ACE Posts: 98,322 Trailblazer
    Can you submit a photo of this information stamp?
    Monitores
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • ALE1967
    ALE1967 Member Posts: 7

    Tinkerer
    Wasn't that the right photo?
  • Commodore_1995#
    Commodore_1995# ACE Posts: 98,322 Trailblazer
    Above the SNID, shows the model number?
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • ALE1967
    ALE1967 Member Posts: 7

    Tinkerer
    edited December 2021
    This is the complete label



    [Edited comment to delete personal information]
  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    So, X34 bmiphz is the full model number. That's an earlier model than either the X34 S or X34 G. It looks like the mounting holes in the back where the stand screws on are VESA format, likely 75mmx75mm, but measure to make sure. I'm working off a photo of the back so it's not clear the placement size.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • StevenGen
    StevenGen ACE Posts: 12,154 Trailblazer
    ALE1967 said:
    Hi guys, I have an Acer predator ultra wide curved 3440x1440 monitor, I wanted to buy a desk stand, I just can't figure out which is the right one that fits with the attachment behind the monitor, can someone help me?


    First you have to disassemble the OEM stand and measure the back plate 4x screws spacing’s to know which stand is applicable. There is no detail on measurements and/or size of the backplane to the x34 monitor. Below is a guide of how to disassemble this stand, so do that and measure your X34’s back plate and chose your appropriate desk stand that you want, as there are many. 



  • ALE1967
    ALE1967 Member Posts: 7

    Tinkerer
    I took the height and width measurement


  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    So, a standard VESA 100mmx 100mm mount will work. You may have to use some short standoffs to move the plate a bit farther away, but you can fabricate that with a couple of nuts and longer screws.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • ALE1967
    ALE1967 Member Posts: 7

    Tinkerer
    I purchased and installed it, thanks for your support
  • billsey
    billsey ACE Posts: 34,219 Trailblazer
    Answer ✓
    Good to know, please mark the appropriate message as the solution so your thread will rise higher in the searches.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Categories