Aspire 514 54G laptop is not turning on After intalling new bois (V1.20).

Abdullah_39
Abdullah_39 Member Posts: 14

Tinkerer

edited December 2021 in Aspire Laptops
"1. Support new SPI ROM. 2. Change load default way to avoid clean various in BIOS.

This is a new bois(V1.20) for My Aspire 514 54G laptop and After I install, I'm starting to get blue screens as the system tries to load windows and when I tried to do a clean installation of windows, No drives were detected, So I suspect that because the drive are not showing up, the system Just fails to load windows with the (inaccessible boot device) error code. So please if someone can help resolve this issue for me because my system is not turning on.

Best Answer

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,440 Pathfinder
    Answer ✓
    @Abdullah_39 try to reset the BIOS setting first. If that doesn't work, use another computer for creating a Windows installation with an USB. Use that USB for Windows reinstallation.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,440 Pathfinder
    @Abdullah_39 does it show automatic repair screen? If yes, you should be able to go to safe mode for further troubleshooting.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • Abdullah_39
    Abdullah_39 Member Posts: 14

    Tinkerer

    edited December 2021
    AnhEZ28 said:
    @Abdullah_39 does it show automatic repair screen? If yes, you should be able to go to safe mode for further troubleshooting.
    When I tried to get to safe mode, I couldn't get to it, because the option is not there and because the ssd is not detected, windows is not even showing in the automatic repair options.
    The only thing that I can do to fix this problem is to flash the current bios with an older version because the system was working just fine before I updated the bios to this version.
    So please can anyone tell how to flash the bios with a [fat32] usb flash drive with this  Specific model?.
  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,440 Pathfinder
    Answer ✓
    @Abdullah_39 try to reset the BIOS setting first. If that doesn't work, use another computer for creating a Windows installation with an USB. Use that USB for Windows reinstallation.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!