What RAM and SSD can you recommend for my laptop? (Aspire ES1-332)

Hello everyone, I am new here. I would like to seek some advices from anyone. I am planning to upgrade my RAM and SSD for something cheaper but compatible and good. My RAM as of now, is 4gb, and I am thinking of upgrading it to 8gb. As for the SSD, I am thinking of only 250gb. Are there any of you has some recommendations? Thank you.


Best Answer

FAQ & Answers

  • JackEJackE ACE Posts: 37,390 Trailblazer
    Answer ✓
    Recommend crucial/micron 8GB DDR3L sodimm module at this link.  You can click on crucial SSD tab in same link. They have two very good SSDs in the 240-250GB range.


    Jack E/NJ
  • stoic0310stoic0310 Member Posts: 6 New User
    JackE said:
    Recommend crucial/micron 8GB DDR3L sodimm module at this link.  You can click on crucial SSD tab in same link. They have two very good SSDs in the 240-250GB range.


    Thank you so much JackE. That was a really big help!

    For my last question, are Crucial and Samsung SSDs are the same in terms of compatibility and functionalities for my laptop? Or Crucial is really your recommended?
  • JackEJackE ACE Posts: 37,390 Trailblazer
    Samsung's OK. But if I had your laptop, I'd prefer the WesternDigital blue series 2.5" SSDs.  :)


    Jack E/NJ
  • stoic0310stoic0310 Member Posts: 6 New User
    JackE said:
    Samsung's OK. But if I had your laptop, I'd prefer the WesternDigital blue series 2.5" SSDs.  :)


    Hello JackE, I'm having quite a problem tho. I switched my 4gb into 8gb and when I turned the power on, it stuck with black screen (like there is no detection with the screen). I tried to witch it back again to my 4gb ram and the output is still the same, my screen is still in black. The power blinks only 1 time only and a long period of time. What seems to be the problem?
  • johnsonjjohnsonj Member Posts: 10

    Tinkerer

    stoic0310 said:
    JackE said:
    Samsung's OK. But if I had your laptop, I'd prefer the WesternDigital blue series 2.5" SSDs.  :)


    Hello JackE, I'm having quite a problem tho. I switched my 4gb into 8gb and when I turned the power on, it stuck with black screen (like there is no detection with the screen). I tried to witch it back again to my 4gb ram and the output is still the same, my screen is still in black. The power blinks only 1 time only and a long period of time. What seems to be the problem?

    It may be a bad contact between the RAM & the RAM slot.

    you can check it again.

    And in case you need it, this is a RAM buying guide & an SSD buying guide.
  • johnsonjjohnsonj Member Posts: 10

    Tinkerer

    stoic0310 said:
    JackE said:
    Samsung's OK. But if I had your laptop, I'd prefer the WesternDigital blue series 2.5" SSDs.  :)


    Hello JackE, I'm having quite a problem tho. I switched my 4gb into 8gb and when I turned the power on, it stuck with black screen (like there is no detection with the screen). I tried to witch it back again to my 4gb ram and the output is still the same, my screen is still in black. The power blinks only 1 time only and a long period of time. What seems to be the problem?

    It may be that the ram and slot are not making good contact.

    you should check it again.

  • johnsonjjohnsonj Member Posts: 10

    Tinkerer

    And in case you need it, this is how to choose a RAM and an SSD.
  • johnsonjjohnsonj Member Posts: 10

    Tinkerer

    stoic0310 said:
    JackE said:
    Samsung's OK. But if I had your laptop, I'd prefer the WesternDigital blue series 2.5" SSDs.  :)


    Hello JackE, I'm having quite a problem tho. I switched my 4gb into 8gb and when I turned the power on, it stuck with black screen (like there is no detection with the screen). I tried to witch it back again to my 4gb ram and the output is still the same, my screen is still in black. The power blinks only 1 time only and a long period of time. What seems to be the problem?

    It may be that the ram and slot are not making good contact.

    you should check it again.

    And in case you need it, this is a RAM Buying Guide and an SSD Buying Guide.
  • johnsonjjohnsonj Member Posts: 10

    Tinkerer

    stoic0310 said:
    JackE said:
    Samsung's OK. But if I had your laptop, I'd prefer the WesternDigital blue series 2.5" SSDs.  :)


    Hello JackE, I'm having quite a problem tho. I switched my 4gb into 8gb and when I turned the power on, it stuck with black screen (like there is no detection with the screen). I tried to witch it back again to my 4gb ram and the output is still the same, my screen is still in black. The power blinks only 1 time only and a long period of time. What seems to be the problem?

    It may be that the ram and slot are not making good contact.

    you should check it again.

    And in case you need it, this is how to choose a RAM and an SSD.
  • JackEJackE ACE Posts: 37,390 Trailblazer
    Did you disconnect the battery pack connector from the mainboard before you inserted the module? Did you wear a wrist grounding strap?
    Jack E/NJ
  • stoic0310stoic0310 Member Posts: 6 New User
    JackE said:
    Did you disconnect the battery pack connector from the mainboard before you inserted the module? Did you wear a wrist grounding strap?
    No, I did not. Are those the reasons why I encountering this problem?
  • stoic0310stoic0310 Member Posts: 6 New User
    johnsonj said:
    stoic0310 said:
    JackE said:
    Samsung's OK. But if I had your laptop, I'd prefer the WesternDigital blue series 2.5" SSDs.  :)


    Hello JackE, I'm having quite a problem tho. I switched my 4gb into 8gb and when I turned the power on, it stuck with black screen (like there is no detection with the screen). I tried to witch it back again to my 4gb ram and the output is still the same, my screen is still in black. The power blinks only 1 time only and a long period of time. What seems to be the problem?

    It may be that the ram and slot are not making good contact.

    you should check it again.

    Thank you for the info. I will do as you advised.
  • JackEJackE ACE Posts: 37,390 Trailblazer
    Did you make any other changes other than trying to add the RAM module?

    Jack E/NJ
  • stoic0310stoic0310 Member Posts: 6 New User
    JackE said:
    Did you make any other changes other than trying to add the RAM module?

    No, I did not. I just turned off the laptop and then replaced the RAM. I didn't removed any hardwares like HDD and Battery, just the RAM.
  • JackEJackE ACE Posts: 37,390 Trailblazer
    OK. Try this. Remove the charger. Then open the case and disconnect the battery connector from the mainboard. Remove the new RAM module. Then, with the battery still disconnected, press and hold the power button for a few minutes to make sure all residual electrical charges on the mainboard have been discharged.

    Then reconnect the battery but not the RAM module. Make sure no other connectors that you can see are loose. Then replace the bottom cover without the new RAM module. Then plug the charger back in. Wait for the battery charge LED to turn steady blue indicating full charge. Then try to turn it on again like it was before tried to upgrade anything.
    Jack E/NJ
Sign In or Register to comment.

Who's Online899

Acer-Blayn
Acer-Blayn
Acer-Ingrid
Acer-Ingrid
Acer-Jose
Acer-Jose
CPUser72
CPUser72
earljoenferrer04
earljoenferrer04
egydiocoelho
egydiocoelho
Euripedes
Euripedes
JoseCastillo1990
JoseCastillo1990
le0
le0
Madan_M
Madan_M
mustaba
mustaba
Negojow
Negojow
Novous
Novous
RenanVilela
RenanVilela
Tahkrii
Tahkrii
Yulsa
Yulsa
+883 Guests

Join in, share your experience!

It looks like you're new here. Sign in or register to get started.

Assistance by Acer


Drivers &
Manuals

Acer
Answers