Drive options on spin Sp111-33

maraxion
maraxion Member Posts: 11

Tinkerer

edited September 2021 in Swift and Spin Series
Hello.
So I started my spin SP111-33-c6uv today and got the "no bootable device". Iv tried resetting the bios, drive is not showing there.

So before I open it up I hoped someone could tell me what options I have inside in terms of changing storage. Is there an emmc I can change, sata-SSD possible, nvme m.2 support etc.

Or if anyone has a good fix for the problem perhaps.

Answers

  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    Your SP111-33 has either an eMMC drive or a 2.5" SATA drive or both. What size drive is in it now? Typically if it's under 128GB it will be the eMMC, if over it'll be a SATA. Either way you can install or replace the SATA drive with a SATA SSD and use that as your boot and system drive.
    Before you open it up use a different computer to download and create a Windows 10 64bit install flash drive. We will be booting from that to try and recover your existing stuff or to install a new image. With the flash drive plugged in you should be able to get into the BIOS and set Secure Boot as disabled and the F12 Boot Menu to enabled. Once you save and exit with those set, reboot and use the F12 key to select the flash drive for booting. Let us know when you are at that point and we'll see about recovery.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • maraxion
    maraxion Member Posts: 11

    Tinkerer

    billsey said:
    Your SP111-33 has either an eMMC drive or a 2.5" SATA drive or both. What size drive is in it now? Typically if it's under 128GB it will be the eMMC, if over it'll be a SATA. Either way you can install or replace the SATA drive with a SATA SSD and use that as your boot and system drive.
    Before you open it up use a different computer to download and create a Windows 10 64bit install flash drive. We will be booting from that to try and recover your existing stuff or to install a new image. With the flash drive plugged in you should be able to get into the BIOS and set Secure Boot as disabled and the F12 Boot Menu to enabled. Once you save and exit with those set, reboot and use the F12 key to select the flash drive for booting. Let us know when you are at that point and we'll see about recovery.
    Opened it up tohave a look. The HDD/SSD spot is empty and no connector present. So It seems this is a MMC only unit. Can i change that then, and where is it located. Its not easy to see as in normal laptops.
  • maraxion
    maraxion Member Posts: 11

    Tinkerer

    edited September 2021
    So if my emmc is dead and there is no other way of adding a drive it seems I have 2 options.
    Either replace the main board or run OS from the USB 3.0 or microsd slot.
    So then I would think the USB 3.0 slot is faster than the SD slot.

    But is there a way to download an instal image from acer to another computer so I can make an install usb? Not sure if these run a more light weight windows 10?
  • maraxion
    maraxion Member Posts: 11

    Tinkerer

    edited September 2021
    With the flash drive plugged in you should be able to get into the BIOS and set Secure Boot as disabled and the F12 Boot Menu to enabled. Once you save and exit with those set, reboot and use the F12 key to select the flash drive for booting. Let us know when you are at that point and we'll see about recovery.
    Tried the above. Iv disables secure boot, fresh windows 10 boot image on usb drive. The bios finds the USB drive, but it just stands forever spinning the wheel and try booting from it.
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi @maraxion,

    In the BIOS information page is the unit HDD is showing. ​
  • maraxion
    maraxion Member Posts: 11

    Tinkerer

    edited September 2021
    Easwar said:
    Hi @maraxion,

    In the BIOS information page is the unit HDD is showing. ​
    Hello.
    No the HDD is not showing in bios.
    Booting to USB with windows 10 image on it wil just show the spinning wheel forever :(
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    I am escalating since I don't find the part number for the SATA cable that you will need in order to mount a 2.5" drive.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • maraxion
    maraxion Member Posts: 11

    Tinkerer

    billsey said:
    I am escalating since I don't find the part number for the SATA cable that you will need in order to mount a 2.5" drive.


    Dont think this one have an port for that. It seems some of these models have either sata or emmc. And this has an 64gb emmc that does not show in bios suddenly.
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    I believe the port is there on all revs, since they don't have different part numbers for different motherboards listed in the FRU list. Here's the diagram for connectors:
    As you can see, the HDD connector doesn't look like a typical SATA connector. It has a ribbon cable that goes from the small connector to a normal SATA data/power connector.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • DanInso
    DanInso Member Posts: 1 New User
    Hello,

    My Acer spin 1 SP111-33 cannot find the Hard Drive emmc and its keeps on displaying "no bootable device". I am thinking that if it's possible to have external storage and install the o.s in it?
  • Digite seu comentário
    DanInso said:
    Hello,

    My Acer spin 1 SP111-33 cannot find the Hard Drive emmc and its keeps on displaying "no bootable device". I am thinking that if it's possible to have external storage and install the o.s in it?
    Does the hard drive appear in the bios info tab?


    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    The SP111-33 models had an option to have a HDD installed instead of the eMMC. I don't believed they shipped any of those options though, so the parts list doesn't include the numbers for the SATA cable or HDD bracket. I've asked the moderators to see if they can get us the numbers...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    And I got the answer: Cable part number: 50.H0VN8.006 and HDD bracket part number: 33.H0VN8.003. The screws are M2x3.5 (5) to hold the bracket in place and standard flat head screws for 2.5" HDD (usually #6-32x0.25") to hold the drive to the bracket.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.