HELLO MY ACER NITRO 5 AN-515-43 HEATS UP WHEN KEPT AT HIGH PERFORMANCE OR BALANCE MODE

2»

Answers

  • GAMING6698
    GAMING6698 ACE Posts: 7,953 Pathfinder
    edited September 2021
    @dhanangaprl9
    1)Suggest you to not touch anything else in AMD WATTMAN if you don't know about it
    Suggestion-
    -Use memory timing level 2 for best performance 
    -You can try to overclock + Undervolt

    2)You can use Ryzen Master to lower CPU tdp to keep your CPU Cool.
    windows 10/11 optimization guide for gaming 
    Windows 10/11 optimization guide for gaming — Acer Community

    My AN515-43 laptop UserBenchmark-
    https://www.userbenchmark.com/UserRun/51514566
  • Nero21
    Nero21 Member Posts: 191 Mr. Fixit WiFi Icon
    @dhanangaprl9
    What is your Bios version?
  • dhanangaprl9
    dhanangaprl9 Member Posts: 29 Enthusiast WiFi Icon
    edited September 2021
    I have been done such things more than you know.
    - Memory timing level 2 indeed increase perfomance on most game. but, when i play watchdogs legion the perfomance went down after a couple minutes (it makes memory corruption i think, same happen with ac valhalla but after i played a bit longer). so, i keep it default.
    - Overclock does increase some fps by a little. never did OC + UV because it will took a lotta time for trying and error finding the right spot.

    - Lowering TDP in Ryzen Master will also limiting max frequencies. By Default in a high load 35W = it will reach 3,7Ghz more often and longer. Decreased to 25W = it didnt reach 3,7Ghz (Mostly ~3,0Ghz) temperature decrease by ~10C. It does decrease temp but also decrease cpu perfomance. I was did this on a game which utilized the GPU more than CPU like eFootball PES 2021.
  • dhanangaprl9
    dhanangaprl9 Member Posts: 29 Enthusiast WiFi Icon
    @Nero21
    im using v1.12 now. before i did a downgrade to version 1.03, 1.04, 1.10.
    Based on my testing version 1.10 and 1.12 are fine. i was thinking v1.12 causing high temperature but, it seems not.
  • Nero21
    Nero21 Member Posts: 191 Mr. Fixit WiFi Icon
    @dhanangaprl9
    Can i delete Msi AfterBurner after setting settings and rebooting?

    Also my Settings reset when i open amd software again next time 
  • NGZEUS
    NGZEUS Member Posts: 300 Mr. Fixit WiFi Icon
    Sorry for the late reply everyone

    So what should i do with my laptop to fix this?
    IF YOU THINK I HAVE ANSWER YOUR QUESTION PLEASE CLICK YES :)

  • dhanangaprl9
    dhanangaprl9 Member Posts: 29 Enthusiast WiFi Icon
    edited September 2021
    @Nero21 no, you need to keep it. because after vga update msi settings "Extend official overclocking settings" went back to default (unticked/disabled) so its need to re-enable.

    my setting never reset. im on radeon 2.6.1 stable version. if you are on stock oem driver from acer, i think thats why it give you such problem in amd tuning. try to uninstall it with amdcleanuputility and install driver from amd. If you want to do it you need to remember to hide VGA Driver update from windows update as it will fckd up everything.

    DWYOR

    @NGZEUS i suppose you have read the whole conversation and you now repaste doesnt really fix your problem. If you decide to follow my suggestion in previus post, its for advance user who should proceed with caution doing such stuff. i will not responsible for damaged device. But, the adventage is clear to reduce temperature to more than 10C++ without sacrificing perfomance.