NitroSense software does not open, but it shows up on task manager(Nitro AN515-52)

124»

Answers

  • tech12
    tech12 Member Posts: 57 Devotee WiFi Icon
    Reinstalling it works
  • Nurlan
    Nurlan Member Posts: 4 New User
    Guys i found a solution. It finally works, i have spent 2 days in order to find it. I posted it in youtube. If you still need help check my video out
    https://youtu.be/WWo9MPM-L6Y
    It will definitely work for you.
  • ZKTZ09
    ZKTZ09 Member Posts: 1 New User
    I've tried all the methods that are here, but Nitrosense still does not run the program / not open
  • Matisek
    Matisek Member Posts: 2 New User
    All of the previous solutions didn't work for me. 
    But i found one useful:
    1) Install Microsoft Visual C++ 2015 Update 3 RC (https://www.microsoft.com/pl-PL/download/details.aspx?id=52685)
    2) Turn on all .exe in directory where you installed NitroSense
    3) Turn on 'appxbundle' type file in directory where you downloaded NitroSense
    Done, it worked for me      =) 
  • KarstenPH
    KarstenPH Member Posts: 6

    Tinkerer
    edited September 2020
    Anthony81 said:
    System Model Nitro AN515-52
    NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
    Try an update. There is a new ver. available and updates may fix the problem. Go to https://www.acer.com/ac/en/GB/content/drivers and put your model number in. then click applications. then download nitrosense. Uninstall the old nitrosense then Install the updated version. well it worked for me. but for you idk
  • EIRRA
    EIRRA Member Posts: 6

    Tinkerer
    ChristianMilanov said:
    kmg said:
    I think I found the solution. The issue seemed to be due to some performance counters. After running the following commands, the NitroSense application seemed to be able to start now. Cheers!



    Thank you so much, I spent my whole day trying to fix my issue, nothing else work, finally at 20:30, I found your comment and it worked, I can’t thank you enough!
    whhat happens after that?
    is there any continuation coz after i click enter another PS C: WINDOS\SysWOW64\wbem>. popped up
  • vladdsg16
    vladdsg16 Member Posts: 1 New User
    BaqraCandi said:
    Anthony81 said:
    System Model Nitro AN515-52
    NitroSense software does not open, but it shows up on task manager. Any suggestions to make it work? I have uninstalled it and downloaded it again from the acer website.
    I tried uninstall and then install and repair , reset and even installed new window ....Solution is to install latest Microsoft visual C++ 2015-2019...https://support.microsoft.com/en-us/help/2977003/the-latest-supported-visual-c-downloads
     This worked for me !! 
  • patrick90900
    patrick90900 Member Posts: 5

    Tinkerer
    edited January 2021
    kmg said:
    I think I found the solution. The issue seemed to be due to some performance counters. After running the following commands, the NitroSense application seemed to be able to start now. Cheers!



    my problem solved using this andditionally i made some tweeks



    "NitroSense_Acer_3.01.3012_W10x64\Plugs\Nitro AN515-52"  (My model is nitro-ANA-515-52)
    in "feature.ini" file i changed

       from 
    Type=0
       to 
    Type=1


  • popradu10
    popradu10 Member Posts: 1 New User
    Thanks @patrick90900 , for me the command 
    C:\Windows\SysWOW64>.\lodctr.exe /R
    Info: Successfully rebuilt performance counter setting from system backup store
    did the job.
  • AmeliaBelli
    AmeliaBelli Member Posts: 2 New User
    Hi,
    If your problem still not solved then you can check this clean installation guide: https://community.acer.com/en/discussion/554696/acer-an515-42-clean-install-guide I hope it will clear all your queries. I was also finding the right way on how I can clean install Acer An515-42 and finally this guide solved all my ambiguties. 
  • thoycast1214
    thoycast1214 Member Posts: 1 New User
    Hey I think I have the answer. I resolve this when my Photoshop is also not opening and showing some errors about DLL files on my system. Here are the list of the DLL files you need to download, extract and paste to C:\Windows\System32

    concrt140.dll
    msvcp140.dll
    vcruntime140.dll
    vcruntime140_1.dll

    You can download DLL on this site https://www.dll-files.com/

    I hope you can also resolve your problem.
  • AmeliaBelli
    AmeliaBelli Member Posts: 2 New User
    Hey, check this installation guide https://community.acer.com/en/discussion/554696/acer-an515-42-clean-install-guide I hope this guide help you. 
  • ziro
    ziro Member Posts: 1 New User
    Nice post, help me found out i didn't install the APPXBUNDLE FILE :s  .... I was thought the setup.exe is the installer for nitro sense
  • MrDeafult12
    MrDeafult12 Member Posts: 3 New User
    MalQy said:
    Hi guys I found a fix that works for me....you need to run every highlighted application in installed nitrosense folder and then go to folder that you downloaded from acer site with setup files and run this appxbundle file....see attachments :) hope it will work for you 
    I found the solution guys on Reddit, do the following steps.

    1. Uninstall Nitrosense

    2. Go to Acer's website and download Nitrosense

    3. Extract folder and run Setup.exe

    4. Run Command prompt as Administrator

    5. type in the following (without the quotation marks): ".\lodctr.exe /R"

    6. Go back to the folder where you extracted Nitrosense

    7. Go into "Nitrosense V3.1" folder

    8. Run APPXBUNDLE file.

  • MrDeafult12
    MrDeafult12 Member Posts: 3 New User
    AmeliaBelli said:
    Hi,
    If your problem still not solved then you can check this clean installation guide: https://community.acer.com/en/discussion/554696/acer-an515-42-clean-install-guide I hope it will clear all your queries. I was also finding the right way on how I can clean install Acer An515-42 and finally this guide solved all my ambiguties. 
    I found the solution guys on Reddit, do the following steps.

    1. Uninstall Nitrosense

    2. Go to Acer's website and download Nitrosense

    3. Extract folder and run Setup.exe

    4. Run Command prompt as Administrator

    5. type in the following (without the quotation marks): ".\lodctr.exe /R"

    6. Go back to the folder where you extracted Nitrosense

    7. Go into "Nitrosense V3.1" folder

    8. Run APPXBUNDLE file.

  • MrDeafult12
    MrDeafult12 Member Posts: 3 New User
    edited May 2022
    Note: This is the third time commenting on this so I hope you can find this comment.

    I found the solution guys on Reddit, do the following steps.

    Please reply if you have any errors.

    1. Uninstall Nitrosense

    2. Go to Acer's website and download Nitrosense

    3. Extract the folder and run Setup.exe

    4. Run Command prompt as Administrator

    5. type in the following (without the quotation marks): ".\lodctr.exe /R" (In the first time typing the command, it will show that it is unsuccessful, the command should work the second time)

    6. Go back to the folder where you extracted Nitrosense

    7. Go into the "Nitrosense V3.1" folder

    8. Run the APPXBUNDLE file.

    9. Click launch.

  • KaritoLIFAD
    KaritoLIFAD Member Posts: 2 New User


    https://community.acer.com/en/discussion/comment/626031#Comment_626031

    Works for me, thank you so much for the solution! You,'re great 😊

    NitroSense 11_10_2022 11_25_47.png


This discussion has been closed.

Categories