Aspire 3 A315-41-R287 White Screen Problem and its solution?

kebs
kebs Member Posts: 9 New User
edited June 2021 in Aspire Laptops
My Acer Aspire 3 A315-41-R287 screen turns white all of a sudden after turning it on. What can be the probable cause why it turns to be like that? Thank you.

Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    So does mine when I first turn it on. But then it operates normally. Are you saying it's always a white screen? If so, press and hold power button till machine shuts off. Then unplug charger. Then insert paperclip into reset pinhole on bottom of machine for 30 seconds. Then plug charger back in. Then wait  for the battery charge light to turn to steady blue from steady orange. Then turn the machine on again

    Jack E/NJ

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi kebs,

    Check unit goes into BIOS page are not. 
  • kebs
    kebs Member Posts: 9 New User
    JackE said:
    So does mine when I first turn it on. But then it operates normally. Are you saying it's always a white screen? If so, press and hold power button till machine shuts off. Then unplug charger. Then insert paperclip into reset pinhole on bottom of machine for 30 seconds. Then plug charger back in. Then wait  for the battery charge light to turn to steady blue from steady orange. Then turn the machine on again
    I did try this but still the white screen stays there. 
  • kebs
    kebs Member Posts: 9 New User
    Easwar said:
    Hi kebs,

    Check unit goes into BIOS page are not. 
    It can't go to the BIOS page because its just only the white you you'll see.
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    OK. Does HDMI out to a TV also show a white screen?

    Jack E/NJ

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi kebs,

    Try to do power drain,

    1. Shutdown the unit.
    2. Unplug the cables connected to the unit.
    3. At bottom of the unit there will be a small tiny pin hole with a battery symbol close to it. Take a pin or a paper clip insert into it you feels like pressing a button hold it for 20-30 seconds. ​

  • kebs
    kebs Member Posts: 9 New User
    JackE said:
    OK. Does HDMI out to a TV also show a white screen?
    Nothing shows. The external monitor shows black screen through out.
  • kebs
    kebs Member Posts: 9 New User
    Easwar said:
    Hi kebs,

    Try to do power drain,

    1. Shutdown the unit.
    2. Unplug the cables connected to the unit.
    3. At bottom of the unit there will be a small tiny pin hole with a battery symbol close to it. Take a pin or a paper clip insert into it you feels like pressing a button hold it for 20-30 seconds. ​

    I did try this again. Then seconds after, I got a half white screen. When I try to refresh the unit the screen goes flickering until it goes to white screen again.
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Try to turn on the external screen with the FN+F5 toggle key combination.

    Jack E/NJ

  • kebs
    kebs Member Posts: 9 New User
    JackE said:
    Try to turn on the external screen with the FN+F5 toggle key combination.
    I did try this also but didn't work. 
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Has the HDMI port ever worked with an external screen?

    Jack E/NJ