Number HDD cable for Veriton z4860g
wext
Member Posts: 3 New User
Helo!
I want to install an additional HDD, but I don't know a part number HDD cable.
I want to install an additional HDD, but I don't know a part number HDD cable.
0
Answers
-
@wext
Why bother with the part number? Just get a 8"-10" SATA3 data cable (if the HDD you want to add is a SATA3 one) from Amazon or other electronic store. The other thing you may want to consider is whether you want one that has a clip on it( so the connector won't be loosen easily) or you want it to be right angle plug for easy connector access.
Oh, I always recommend people to use 2.5" SATA3 Solid State Drive instead of using the old style spinning HDD, as SSD is a few times faster than old HDD.0 -
A special cable is required to connect a SATA drive (need part number)In terms of data storage reliability, HDD has advantages over SSDFor OS uses an NVMe SSD
0 -
Yes, that model is new enough we don't have access to the service guide. There will be a cable that runs between the connector on the MB, just as they do with laptops, but we can't get you the part number until the SG shows up. It usually doesn't take too long after they start shipping for the SG to arrive, so hopefully it'll be soon. In the mean time you can contact Acer support for your local and they should be able to get you the number. It's possible you will also need a cage, The holes in that image seem to big for mounting screws.
Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.0 -
Аnswered, but I still have doubts (the second connector is not visible in the picture)
0 -
That's the correct one, with the right number: 50.VS0D1.004. There should only be the one cable to add a 2.5" drive in.
Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.0
