Acer Aspire 5755g 2 graphic cards issue
I went into my bios to activate the switch so I can use the Nvideia Card in my 5755g and when I rebooted after saving the bios I had no Graphics at all It just sat their with a flashing cursor top left of the screen.
I tried to reboot into the bios with no luck.
I went online and seen the bios repair on the acer site so I made up a thumb drive with just the required file to reset the bios to factory.
Now I have no power at all nothing nada I have tried with and without the AC power nada. It does not even show the AC is hooked up at all no lights nothing.
Any Ideas ?
Dan C
Answers
-
Hi,
You should reprogram your bios
We would suggest contacting technical support in your region for further assistance with this issue.
Acer Service and Support0 -
I opened a case 6 hr ago and I still have no aswer as to what to do with it or where to take it for repair?
0 -
I did a reprogram of the bios and that is when it went totaly dead
0 -
Took it in to Acer Service The Main board was fried. HUmmm because I update the Bios it fries the Main Board? Anyway fixed in one day Now I will leave it on 24hrs a day for the next 30 days to see if it is still OK ( 90 day Warranty)
0
