Recently I bought a brand new (Acer Nitro V 15 ANV15-51-9637 Intel Core i9 RTX 4060 Gaming laptop) and upgrade it with the primary slot (Samsung 990 PRO 2TB M.2 SSD) and the secondary slot (WD Black SN7100 1TB M.2 SSD) and 2x16GB 5600 DDR5 SODIMM of RAM.
During the clean windows 11 installation, the drive did not show up so i decided to disable the VMD to complete the process, and yes, everything went well, and once Windows 11 was installed, I downloaded all updates and installed all Acer drivers.
But after a few days, every time I start my computer, it either gets stuck at the logo screen, or shows a message saying my computer encountered a problem with these codes:
"Inaccessible_Boot_Device (0x7b)" or CLOCK_WATCHDOG_TIMEOUT (0x101).
I have already checked for corrupted files via SFC /scannow, chkdsk /f/r and Driver Verifier, but this did not solve the problem., So I thought I should reset the BIOS to default and enable VMD, but that didn't work because the computer starts going straight to Windows troubleshooting when it starts, so i had to re-disable the VMD again to make my pc working.
Any idea on how to fix this issue?
Another thing, when I use NitroSense to check the hard drive and memory, the memory passes the first check and stops on the second check 0%. which i didn't had this issue before installing the new M.2 SSD!
At the same time both RAM card work well and I have no problem with them.
[Edited the thread to add model name to the title]
