Acer Predator PH317-53 (17.3″, 2019) – LCD Replacement for Color-Accurate Video Editing?

Options
reingmz
reingmz Member Posts: 2 New User

Hi, I’m using an Acer Predator Helios 300 PH317-53-798L (2019 model, 17.3″ display) mainly for video editing with DaVinci Resolve and Adobe Premiere Pro. My built-in screen needs replacement, and my top priority is color accuracy, not gaming or high refresh rate.

Based on research and recommendations, I’m currently choosing between two 17.3″ FHD (1920×1080, eDP 30-pin) panels:

  1. LG LP173WF4-SPF1 – 60Hz, ~95–98% sRGB
  2. AUO B173HAN04.0 – 144Hz, ~93–95% sRGB

I’d appreciate help with the following:

  1. Are both of these panels compatible with the PH317-53-798L?
  2. Since I’m focused on color accuracy for editing, is the LG 60Hz panel the better choice, even if it means losing 144Hz?
  3. Will switching from 144Hz to 60Hz cause any issues or limitations on this model?

Any insights from those who’ve replaced the LCD on this model — especially for creative work — would be greatly appreciated. Thank you!

Best Answer

  • Puraw
    Puraw ACE, Member Posts: 18,318 Trailblazer
    edited 3:13AM Answer ✓

    Hi @reingmz ,

    Great question—and you're already on the right track by prioritizing color accuracy over refresh rate.

    Acer often sources panels from multiple vendors, so even identical laptop models can have different screens. The best way to confirm compatibility and specs is:

    🔍 Step-by-Step Panel Identification

    1. Download HWINFO64 Skip the sensor scan and open the Monitor section. Note the screen ID, brand, and part number.
    2. Visit Panelook.com Enter your panel details to view specs like sRGB coverage, refresh rate, and brightness. This helps you compare alternatives like:
      • LG LP173WF4-SPF1 – 60Hz, ~95–98% sRGB
      • AUO B173HAN04.0 – 144Hz, ~93–95% sRGB
    3. Verify eDP Pin Count Physically disconnect the screen cable from the motherboard and count the pins—most are 30 or 40-pin, but mismatches can cause boot issues or no display.

    🧠 Pro Tip

    If your current panel is 144Hz and you switch to 60Hz, the system should still boot fine, but you might need to reset display settings or update EDID data via driver reinstall.

    Let me know if you want help sourcing a vendor or checking panel availability. I can also help confirm if the LG panel is truly plug-and-play for your PH317-53.

Answers

  • Puraw
    Puraw ACE, Member Posts: 18,318 Trailblazer
    edited 3:13AM Answer ✓

    Hi @reingmz ,

    Great question—and you're already on the right track by prioritizing color accuracy over refresh rate.

    Acer often sources panels from multiple vendors, so even identical laptop models can have different screens. The best way to confirm compatibility and specs is:

    🔍 Step-by-Step Panel Identification

    1. Download HWINFO64 Skip the sensor scan and open the Monitor section. Note the screen ID, brand, and part number.
    2. Visit Panelook.com Enter your panel details to view specs like sRGB coverage, refresh rate, and brightness. This helps you compare alternatives like:
      • LG LP173WF4-SPF1 – 60Hz, ~95–98% sRGB
      • AUO B173HAN04.0 – 144Hz, ~93–95% sRGB
    3. Verify eDP Pin Count Physically disconnect the screen cable from the motherboard and count the pins—most are 30 or 40-pin, but mismatches can cause boot issues or no display.

    🧠 Pro Tip

    If your current panel is 144Hz and you switch to 60Hz, the system should still boot fine, but you might need to reset display settings or update EDID data via driver reinstall.

    Let me know if you want help sourcing a vendor or checking panel availability. I can also help confirm if the LG panel is truly plug-and-play for your PH317-53.

  • reingmz
    reingmz Member Posts: 2 New User

    Thanks for the detailed reply appreciate you breaking it down clearly. I’ll check my panel using HWINFO64 and compare it on Panelook like you suggested.