Nitro AN17-42 Is there a way to set a constant fan rpm?

I have Nitro AN17-42 and I understand the fans are regulated to turn on at specific temperature, but couldn't they just stay on then? I find it distracting when the fans turn on every 30 seconds, because the T goes above 38°C, only to turn off right after it drops back down by one celsius. Rpm of around 1800-2000 is enough to keep it cool and quiet, I can ignore the sound of fans spinning but not start of it. Auto control on quiet does the same and "custom" control too. Is there a way to actually set a custom and constant speed and keep it there?

[Edited the thread to add model name to the title]

Accepted answers

All comments

Sharanji

@Meho72

If you have Acer NitroSense software you can likely set a constant fan RPM, allowing you to manually control the fan speed instead of relying on the automatic temperature-based settings.

Open the NitroSense software, Navigate to the fan control section within NitroSense. This might be under a "Performance" or "Cooling" tab. Look for options to enable manual fan control or set a custom fan speed. You might see a slider or a numerical input to adjust the RPM. Choose the RPM you want the fans to run at consistently. Monitor the temperatures and fan noise to ensure the chosen RPM is optimal for your needs.