Spin SP513-54N shuts down after overpowering USB hub, CPU stuck out at 0.19% utilization

dclou
dclou Member Posts: 5 New User
edited December 13 in Swift and Spin Series

I was powering a portable hard drive through a USB hub (USB-C to 4 USB A 3.2 Gen 2) when the Spin 5 shut down unexpectedly. The external power input (non Power Delivery) to the USB hub should have been 5V/2A, but I incorrectly connected a 100 watt (5V/20A?) source. This triggered the unexpected shut down, which also fried the portable hard drive (not spinning and smell of burnt plastic). The Spin 5 seems to run OK, except the CPU maxes out at 0.19% utilization (it runs fine for the first few minutes after power-up ), which causes the PC to run so slow it's not usable.

I suspect there has been some internal hardware damage (perhaps replacing the battery will cure the problem?) and the PC needs to be replaced. But I am also wondering if anyone has any other ideas I might try (system settings?).

My PC is a Spin SP513-54N running Windows 10 Home.

Thank you!

[Edited the thread to add model name to the title]

Answers

  • Puraw
    Puraw ACE, Member Posts: 14,097 Trailblazer

    Hi, you charged the regular laptop USB-C port with the hub and that possibly damaged the motherboard, bring the laptop to Acer Services in your country.

  • dclou
    dclou Member Posts: 5 New User

    Thank you Puraw! That's what I thought also.

    By the way, I meant max 0.19 GHz instead of utilization, not that it matters.

  • StevenGen
    StevenGen ACE Posts: 12,494 Trailblazer
    edited December 13

    If your Spin 5 laptop works then its not its 10th Gen cpu or its Intel Iris Plus Graphics that has been affected, its probably a capacitor that regulates the power to the cpu that shorted out and that is why the cpu only power to 0.19% GHz, as and if a mosfet would have shorted from a high 19V current, the cpu and its graphics would have fried and the laptop would have been unusable and you would not have been able to boot the laptop at all. Take your laptop to a good and experienced technician and get them to pinpoint where the exact capacitor problems is, as they will change it for a fraction of the cost of a as the new mainboard or a new laptop. Good luck.

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍

  • dclou
    dclou Member Posts: 5 New User

    Thank you SteveGen! That might save me a bunch of money.