Nitro v15-lagging a lot, it gives nice fps but lags a lot the game freeze frequently

Sh4nks23
Sh4nks23 Member Posts: 3 New User
edited November 10 in Nitro Gaming

I bought a new acer nitro v15 laptop with ryzen5 and RYX 3050 and 8gb ram like 2-3 months ago my gaming experience have been the same ever since day 1 the laptop gives nice fps but lags a lot the game freeze all the time the frame freeze wasn’t that frequent it will happen like in the start of the game and end after few mins of playing but lately it doesn’t stop and the frame freeze is so much that I can’t play any game.

[Edited the thread to add model name and issue detail to the title]

Best Answers

  • Puraw
    Puraw ACE, Member Posts: 14,043 Trailblazer
    Answer ✓

    Hi, 8GB RAM is insufficient for gaming you need at least 16GB, add an 8GB RAM module with the specs. as the module already installed.

  • Axxo
    Axxo Member, Ally Posts: 925
    Answer ✓

    Hi Sh4nks23,

    Let's try the methods below and check if any of the resolves fixes the issue.

    Method 1: Perform SFC Scan and Repair Windows Image
    -This process will perform scan for any corrupted system files or integrity violation and will attempt to repair it along with the Windows Image.

    1. Open command prompt with administrator access
    2. Type each command below and wait until scan is completed.
    • sfc /scannow
    • DISM /Online /Cleanup-Image /CheckHealth
    • DISM /Online /Cleanup-Image /ScanHealth
    • DISM /Online /Cleanup-Image /RestoreHealth

    Quick note: While the command is running, it's expected to see the process stuck at 20 or 40 percent. After a few minutes, the process will complete successfully.Once you complete the steps, the Deployment Image Servicing and Management tool will connect to the Windows Update servers to download and replace any damaged files in the local image for Windows 10 as necessary.

    1. Close the command prompt.

    Method 2: Perform Clean Boot

    • This process will eliminate 3rd party application running in the background of your computer along with services that are not needed to run windows. If there's any conflicting 3rd party application that causes the issue on your computer, this process will stop it.
    1. Open the run box by pressing the Windows Key + R and type msconfig
    2. System Configuration Utility box will open and by default you are on general tab.
    3. On the General tab, click the selective startup and make sure that load system service and load startup items both have checked mark.
    4. Click on services tab
    5. Put a check mark on Hide All Microsoft Services > This is a very important part as if you miss to click on this, computer might not boot properly or permanently and will end up on clean installation.
    6. Once Hide all Microsoft Services have checked mark on it, click on Disable All
    7. Click on the Startup Tab and click open task manager. This will open another window which contains all your startup applications on the administrator account.
    8. Disable all application that you're not using. You can simply just click on them and select disable.
    9. Click OK , Apply and close the configuration utility.

    Method 3: Update Driver

    1. Open run box by pressing Windows Key + R and type devmgmt.msc then hit enter
    2. Locate and expand Mice and other pointing devices
    3. Right-click HID-compliant mouse and select Update driver
    4. Select Search automatically for drivers
    5. Wait for the process to complete, once completed, restart your computer and check if it resolves your issue.

    Method 4: Roll-back driver

    1. Open run box by pressing Windows Key + R and type devmgmt.msc then hit enter
    2. Locate and expand Mice and other pointing devices
    3. Right-click HID-compliant mouse and select Update driver
    4. Select Browse my computer for drivers
    5. Select Let me pick from a list of available drivers on my computer
    6. Select any older driver from the list and click next
    7. Wait for the process to complete, once completed, restart your computer and check if it resolves your issue. Hope this helps.

    ———————————————————————————————

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful.

Answers

  • Puraw
    Puraw ACE, Member Posts: 14,043 Trailblazer
    Answer ✓

    Hi, 8GB RAM is insufficient for gaming you need at least 16GB, add an 8GB RAM module with the specs. as the module already installed.

  • Sh4nks23
    Sh4nks23 Member Posts: 3 New User

    The laptop i had before also had 8gb ram but the frames never dropped and I’m facing so much frame drops in this laptop playing the same game, and yes i was considering to upgrade the ram so should i go for local laptop shops in my area or not?

  • Axxo
    Axxo Member, Ally Posts: 925
    Answer ✓

    Hi Sh4nks23,

    Let's try the methods below and check if any of the resolves fixes the issue.

    Method 1: Perform SFC Scan and Repair Windows Image
    -This process will perform scan for any corrupted system files or integrity violation and will attempt to repair it along with the Windows Image.

    1. Open command prompt with administrator access
    2. Type each command below and wait until scan is completed.
    • sfc /scannow
    • DISM /Online /Cleanup-Image /CheckHealth
    • DISM /Online /Cleanup-Image /ScanHealth
    • DISM /Online /Cleanup-Image /RestoreHealth

    Quick note: While the command is running, it's expected to see the process stuck at 20 or 40 percent. After a few minutes, the process will complete successfully.Once you complete the steps, the Deployment Image Servicing and Management tool will connect to the Windows Update servers to download and replace any damaged files in the local image for Windows 10 as necessary.

    1. Close the command prompt.

    Method 2: Perform Clean Boot

    • This process will eliminate 3rd party application running in the background of your computer along with services that are not needed to run windows. If there's any conflicting 3rd party application that causes the issue on your computer, this process will stop it.
    1. Open the run box by pressing the Windows Key + R and type msconfig
    2. System Configuration Utility box will open and by default you are on general tab.
    3. On the General tab, click the selective startup and make sure that load system service and load startup items both have checked mark.
    4. Click on services tab
    5. Put a check mark on Hide All Microsoft Services > This is a very important part as if you miss to click on this, computer might not boot properly or permanently and will end up on clean installation.
    6. Once Hide all Microsoft Services have checked mark on it, click on Disable All
    7. Click on the Startup Tab and click open task manager. This will open another window which contains all your startup applications on the administrator account.
    8. Disable all application that you're not using. You can simply just click on them and select disable.
    9. Click OK , Apply and close the configuration utility.

    Method 3: Update Driver

    1. Open run box by pressing Windows Key + R and type devmgmt.msc then hit enter
    2. Locate and expand Mice and other pointing devices
    3. Right-click HID-compliant mouse and select Update driver
    4. Select Search automatically for drivers
    5. Wait for the process to complete, once completed, restart your computer and check if it resolves your issue.

    Method 4: Roll-back driver

    1. Open run box by pressing Windows Key + R and type devmgmt.msc then hit enter
    2. Locate and expand Mice and other pointing devices
    3. Right-click HID-compliant mouse and select Update driver
    4. Select Browse my computer for drivers
    5. Select Let me pick from a list of available drivers on my computer
    6. Select any older driver from the list and click next
    7. Wait for the process to complete, once completed, restart your computer and check if it resolves your issue. Hope this helps.

    ———————————————————————————————

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful.

  • Puraw
    Puraw ACE, Member Posts: 14,043 Trailblazer

    I would get it online from the Crucial site, if your full laptop model is: ANV15-41 with DDR4 RAM see this Crucial link: Acer AN515-41 | Memory RAM & SSD Upgrades | Crucial EU keep in mind that the two RAM modules should form a kit (identical modules) so compare the speed and CL of the new 8GB with the module installed, or keep the old RAM as spare and buy a kit from Crucial 2x8GB-3200MHz (16GB) see link.

    Also, you should uninstall all bloatware and preinstalled programs on your laptop, Open Task Manager Processes and check the background apps running, f those exceed 70 uninstall or disable the ones you don't need till you get close to 70.

  • Sh4nks23
    Sh4nks23 Member Posts: 3 New User