-
10 Best Characters in Dragon Ball Sparking! Zero
Dragon Ball: Sparking! Zero brings fans back to the Dragon Ball universe in a big way, combining iconic characters and flashy battles with gameplay inspired by Dragon Ball Z: Budokai Tenkaichi, the beloved PS2-era series known for its 3D arenas and massive roster. With a character selection of over 180 fighters and the freedom to reenact or even rewrite key battles from Akira Toriyama's classic series, Sparking! Zero pays homage to Dragon Ball’s most memorable moments.
This game isn’t about tight, frame-counting combat like Tekken or Street Fighter. Instead, Sparking! Zero revolves around managing movement, key energy, and transformations while pulling off explosive ultimate moves. Its mechanics are layered enough to reward strategic play, making certain characters stand out as top choices for competitive matches. In this guide, we’ll highlight the top ten most powerful and "broken" characters in Dragon Ball: Sparking! Zero, showcasing who truly dominates on the battlefield and why.
What makes a character OP or broken in Sparking! Zero
In Dragon Ball: Sparking! Zero, a character’s strength depends on how effectively they leverage core game mechanics to control battles and outmaneuver opponents. Here’s what we look for:
* Key management and regeneration: Characters who regenerate or sustain key better stay on the offensive longer, winning critical “vanish wars” by outlasting their opponents’ energy reserves.
* Access to core mechanics: Essential abilities like insta-spark, full power, and after-image strike give characters versatile ways to reset, evade, or apply pressure, providing major advantages in competitive play.
* Endurance and health restoration: Self-sustaining abilities and high durability give characters the edge in longer matches, especially in team formats, by allowing them to survive and recover without relying on teammates.
* Unblockable and hard-to-counter moves: Moves that bypass typical defenses force opponents into difficult situations and create openings that are tough to counter.
* High damage and combo potential: Powerful combos and high base damage are critical, especially when these moves can’t be easily interrupted or countered.
* Adaptability: Characters who perform well across different matchups, or have multiple forms or transformations, add strategic depth and flexibility to any team.
Characters that dominate these areas are the strongest in Sparking! Zero, making them top picks for competitive play.
10 best characters in Dragon Ball: Sparking! Zero
1. Broly (Z)
Z Broly is one of the most overpowered characters in Sparking! Zero, largely due to his incredible durability and key-sustaining abilities, which allow him to dominate opponents through powerful, hard-to-counter attacks. Broly’s unblockable moves make him a nightmare to face off against, especially since he can bypass most standard defenses and gain the upper hand in tight combat situations. His transformation into the legendary Super Saiyan boosts his power significantly, making him even more dangerous.
In competitive play, Broly’s toolkit shines in key management and pressure. Not only does he possess the insta-spark ability to quickly regain key, but he also transforms into a nine-cost powerhouse, meaning he’s stronger in transformed states and able to access more powerful moves and strategies. This heightened strength lets him outlast opponents in vanish wars, as he can efficiently replenish key while staying aggressive and keeping enemies on the defensive.
Z Broly’s combination of unblockable moves, high base power, and endurance creates a nearly unbeatable character, especially for players skilled in key and vanish management. His ability to perform high-damage combos and force opponents into constant defense means that Z Broly can control most battles, making him a top-tier choice for players looking to dominate in Sparking! Zero.
2. Broly (Super)
Super Broly is another top-tier powerhouse, combining sheer offensive power with efficient key management to dominate the battlefield. Like Z Broly, Super Broly benefits from his ability to transform into a nine-cost character, which gives him access to heightened stats and stronger attacks. However, where he truly excels is in his balanced strength across both base and transformed states, allowing him to maintain pressure regardless of his transformation status.
Super Broly’s versatility shines in competitive play. His transformations grant him insta-spark, allowing him to quickly regain key, making him nearly unstoppable in vanish wars, where outlasting opponents is critical. Super Broly is also equipped with heavy-hitting, hard-to-counter attacks that often leave opponents struggling to defend, especially when he combines them with well-timed key blasts. His strong combos, which can inflict heavy damage, make him a brutal force against weaker or poorly timed counters.
What makes Super Broly especially intimidating is his ability to adapt his play style based on the opponent. Against weaker players, his offensive output alone is enough to overwhelm; against high-level players, his insta-spark and ability to manage key effectively make him incredibly hard to take down. This versatility, combined with his raw strength and efficient key usage, makes Super Broly one of the most dominant characters in Sparking! Zero.
3. Yajirobe (Post-Nerf)
Despite recent nerfs, Yajirobe remains a viable choice for players who can master his revised mechanics. Previously, Yajirobe’s ability to use Senzu Beans to fully recover health with ease made him one of the most frustrating characters to face in the game. Now, after an update by Spike Chunsoft, he’s far less of a crutch and more of a skill-based character, but his endurance and unique toolkit still make him valuable in competitive play.
The nerfs primarily target Yajirobe’s Senzu Bean ability. Instead of the original five Skill Count, it now costs six, making it one of the game’s most expensive abilities to pull off. Additionally, Yajirobe starts with zero Skill Count (rather than the standard two), meaning he’ll need to earn Skill Count gradually in battle, making full health recovery a much rarer event. On top of this, his health has also been reduced, and he now begins a match with two and a half health bars instead of three, leaving him more vulnerable than before.
While these changes require players to put in more work to make the most of Yajirobe’s toolkit, his Senzu Bean ability still holds great strategic value, especially in longer matches. His speed, evasiveness, and the potential to recover health with skillful play make him a valuable support character in team settings. With these adjustments, Yajirobe is no longer overpowered but remains a solid choice for skilled players who can navigate his limitations effectively in Sparking! Zero.
4. Android 19 & Dr. Gero
Android 19 and Dr. Gero stand out in the game as two of the most broken characters due to their unique ability to regenerate key indefinitely. While most characters must manage their key carefully, these androids bypass the standard mechanics entirely by having key that never depletes. This infinite key allows them to stay aggressive and outlast opponents in vanish wars, giving them a tremendous advantage in high-level play.
The infinite key regeneration alone makes Android 19 and Dr. Gero formidable, as it allows them to spam key attacks, manage vanish wars effortlessly, and continuously pressure opponents. They don’t need to break off combat to charge or manage key levels, allowing them to maintain offensive momentum. As vanish wars are crucial in competitive play, having an endless key supply means Android 19 and Dr. Gero can sustain key maneuvers where others would be forced to fall back.
Though they lack some of the hard-hitting moves of other top-tier characters, Android 19 and Dr. Gero’s constant access to vanish, super attacks, and evasive moves makes them especially hard to counter. This ability to stay active and responsive regardless of their key levels renders these androids some of the most frustrating opponents to face, cementing them as a powerful, if unconventional, choice in the game.
5. Vegito
When it comes to versatility and adaptability, few characters can match the dynamic toolkit of Vegito. His ability to switch between multiple transformations makes him a strategic nightmare for opponents, as he can adjust his form and play style to suit almost any matchup. With his range of forms, Vegito allows players to tailor their approach, whether they’re facing a defensive character or an aggressive powerhouse.
Central to Vegito’s power are his access to insta-spark and after-image strike—two of the game’s most essential mechanics. The insta-spark lets him quickly recover key, maintaining offensive pressure and allowing him to stay dominant in vanish wars. Meanwhile, after-image strike gives Vegito a significant defensive advantage, letting him evade incoming attacks and setting him up for counterattacks when his opponent least expects it. Together, these abilities make Vegito a character who can seamlessly shift between offense and defense.
Vegito’s flexibility makes him an asset in competitive play, as each transformation can be used strategically to either gain the upper hand or adapt to a changing battlefield. His mix of offensive firepower, defensive options, and form-switching potential makes him one of the most versatile characters in the game, keeping him in top-tier ranks and a favorite choice for players who value adaptability.
6. Ultra Instinct Goku
It’s hard to ignore the advantages UI Goku brings to the battlefield. As one of the few characters with both insta-spark and high-level evasion, he’s built for players who prioritize quick, reactive gameplay. UI Goku’s key strength lies in his ability to dodge attacks effortlessly and turn the tables with powerful counters, which makes him highly effective in fast-paced battles where precise timing is essential.
A standout feature of UI Goku is his near-unbreakable vanish game. Thanks to his efficient key management and access to insta-spark, he can outlast most opponents in vanish wars, maintaining his evasion streak and staying safe from combos. He also gains access to the powerful “charge key blast” ability, which allows him to inflict heavy damage and keep up pressure, punishing opponents who try to approach recklessly. This combination of key management and evasive ability allows him to sustain a defensive stance longer than most characters, buying him time to unleash devastating counters.
UI Goku’s setup rewards those who can master vanish timing and key usage, and he’s a perfect match for players who value strong defensive play with powerful counters. In the right hands, he’s nearly untouchable, as opponents struggle to keep up with his evasion and find openings. His evasive mastery and precise offense make UI Goku one of the most challenging characters to confront in the game.
7. Super Saiyan 4 Gogeta
SSJ4 Gogeta isn’t just about raw damage; he’s a finely-tuned powerhouse that combines high stats, aggressive key control, and unique combo mechanics that make him one of the most punishing characters in the game. With his ability to integrate key blasts directly into combos, Gogeta breaks the typical flow of vanish-counter strategies, making it hard for opponents to defend or reset once they’re caught in his string of attacks. This chaining technique allows him to maintain relentless pressure, capitalizing on any opening to maximize damage output.
His high base stats further set him apart, boosting both his durability and damage potential. As one of the rare characters who can truly dominate vanish wars, Gogeta leverages his insta-spark to continuously regain key, extending his offensive capabilities without pause. Once he charges up, Gogeta’s powerful key blasts and swift transitions between ranged and melee combat create a nearly unbreakable momentum, pushing his opponent to the brink.
In addition, SSJ4 Gogeta’s ultimate attacks are some of the hardest to dodge, with fast animation speeds that make them difficult to counter or avoid. His entire setup caters to players who thrive on sustained aggression, using his blend of power and unbreakable combos to overwhelm opponents. For those seeking a high-risk, high-reward playstyle, SSJ4 Gogeta is a top-tier pick that’s as intimidating as he is effective in the right hands.
8. Whis
Whis brings a unique playstyle to the game, focused on defensive maneuvers that make him exceptionally hard to hit. Unlike most characters, Whis can avoid typical attacks just by standing still, bypassing grabs, standard melee hits, and even some key blasts. This unique stance gives Whis a built-in evasion ability that lets him sidestep attacks without needing to burn key on vanishes or other evasive moves, effectively giving him a free layer of defense that’s tough for opponents to work around.
Beyond his evasive stance, Whis’s stats make him an ideal choice for players who prefer a defensive approach with strong counter potential. His high base stats in both attack and defense mean he can absorb hits when necessary and deal punishing counters when the time is right. Additionally, his healing ability lets him recover quickly, sustaining him through long fights and keeping him a constant threat. In vanish wars, Whis’s evasion skills shine, as he can conserve key while his opponent expends theirs trying to land a hit.
For players who enjoy outlasting their opponent through patience and precision, Whis is one of the most challenging and rewarding characters in the game. His ability to evade most attacks effortlessly and his strong counter options keep him firmly in the high-tier ranks.
9. Android 17 (Super)
Android 17 (Super) brings a deadly mix of agility and energy control to the battlefield. Known for his rapid attack sequences and evasive abilities, 17 is one of the quickest characters in the game, which makes him tough to pin down. His insta-spark ability allows him to instantly recharge key, enabling him to stay mobile and aggressive without the typical limitations of key depletion. This agility is a huge asset in vanish wars, as 17 can outmaneuver and outlast opponents who can’t match his speed or energy recovery.
What sets Android 17 (Super) apart is his low-cost explosive wave ability, which he can activate quickly to push opponents away and reset the fight. This move, combined with his ability to dodge and counter easily, allows 17 to dictate the pace of battle, especially against slower or more rigid characters. His constant barrage of swift attacks and quick counters can easily overwhelm opponents who rely on slower, high-damage moves.
In competitive play, Android 17 (Super) appeals to players who prioritize speed and relentless pressure. His mix of evasive capabilities, quick attacks, and energy management ensures he’s a consistent threat on the battlefield, making him one of the more challenging characters to face in the game.
10. Beerus
Known in Dragon Ball lore as the God of Destruction, Beerus brings a commanding presence to the game with a playstyle that blends precision, power, and tactical key usage. Unlike some of the game’s pure bruisers, Beerus excels at controlling the battlefield through a calculated mix of high-damage attacks and strong key management. His insta-spark ability allows him to efficiently recover key, which means he can maintain offensive pressure while extending combos without the need to pause for a recharge.
What sets Beerus apart is the accuracy and tracking of his key blasts, making it difficult for opponents to dodge and often forcing them to burn key on evasive moves. His ability to land precise, long-range hits adds an extra layer of control over the battlefield, keeping opponents constantly on the defensive. When it’s time to close the gap, Beerus can unleash fast, high-damage melee attacks and ultimate moves with some of the quickest activation speeds in the game, making his close-range offense difficult to counter.
For players who prefer a strategic, commanding playstyle, Beerus offers both offensive and defensive versatility. His ability to control the fight at both close and long range—coupled with the lore-fueled intimidation factor as the God of Destruction—makes him a top-tier choice for those looking to dominate the battlefield with a balance of power and precision.
Recommended Products
Nitro 5
Buy Now
Predator Helios 16
Buy Now
-
In the World of inZOI: Life Simulation Revolutionized
Developed by Krafton, inZOI is a groundbreaking life simulation game that offers a unique and immersive experience. Unlike other games in the genre, inZOI provides a comprehensive community simulation where every character, known as a "Zoi," acts on their free will. This creates a dynamic and ever-changing world that closely mirrors real life.
In August 2024, a Character Studio demo was held, allowing players to explore the game's extensive character customization features ahead of its anticipated release. With Early Access set to launch in late 2024, inZOI is already generating excitement with its promise of photorealistic graphics and deep gameplay mechanics that distinguish it from traditional titles.
Core Concept and Objectives
At its core, inZOI is designed to provide players with a sandbox environment where they can create and control Zois. The primary objective is to manage the lives of these characters by fulfilling their needs—such as hunger, hygiene, and social interaction—while also allowing for a rich narrative experience. Players can explore various cities, engage in diverse activities, and shape their Zois' destinies through choices that reflect real-life scenarios.
The game emphasizes user-generated content, encouraging players to share their creations through an online platform called Canvas. This feature allows users to upload their custom characters and homes, fostering a community of creativity and collaboration. And unlike many life simulation games that focus solely on individual households, inZOI encourages players to decorate or edit public city spaces.
Gameplay Mechanics
The inZOI gameplay loop revolves around open-world exploration, character development, and interaction. Players begin by customizing their Zois using an extensive character creator that offers detailed options for appearance, personality traits, and clothing. The character creator boasts a diversity of, from babies and tweens to young adults and senior citizens.
Once created, players can guide their Zois through various activities—interacting with other characters, forming relationships, embarking on hobbies, and pursuing careers. Each city offers different job options. In Bliss Bay, for example, available jobs include fast food restaurant workers and amusement park employees, while those in Dowon include convenience store staff, firefighters, and K-pop entertainers.
The build mode offers an extensive catalog of items to construct and furnish a Zoi's home. New walls, floors, ceilings, and windows can be created with just a few clicks, and each room can be customized to players' exact specifications. The free mode allows for flexibility in item placement, including stacking objects as desired, ensuring a personalized and engaging building experience.
inZOI goes beyond typical preset colors and patterns by enabling players to generate artificial intelligence (AI) images via an in-game search prompt. These images can be applied to decorative items like curtains and wall art, adding a genuinely personal touch and making the design process accessible even for those lacking artistic skills. Players can mix and match various elements of furnishings, while those preferring quick setups can select build presets to create complete houses with ease. In build mode, players can also choose the Unlimited Floors option, providing limitless possibilities for home creation.
The game's expansive maps offer a variety of customization options, including the ability to adjust city safety levels, impacting crime rates and social dynamics. Players can even control the population of specific animals, such as cats, hinting at the possibility of incorporating pets into households.
Part of the development roadmap, other features that players can expect to see include:
* Karma System: Players' actions have consequences that affect their Zois' future experiences. This adds depth to decision-making as choices can lead to different outcomes.
* City Edit: Players can set the parameters for weather, cleanliness, and what's written on billboards.
* Drivable Vehicles: There are cars that Zois can drive or ride.
Realism and Life Simulation Features
https://youtu.be/aApSteSbeGA?si=OoTJgAkmHIfiVJmX
One of the standout features of the inZOI game is its commitment to realism. Developed using Unreal Engine 5, this real-life simulation game boasts crisp, clear graphics that bring its world to life in ways that similar titles have not achieved. The environments are thoroughly detailed, offering immersive settings where players can engage with their surroundings meaningfully. Additionally, players can scan real-world objects to create in-game 3D models, adding a layer of authenticity to the game
inZOI also implements a comprehensive community simulation where each character operates autonomously. This means unexpected events can occur—such as car accidents or social conflicts—mirroring the unpredictability of real life. Such features aim to enhance the emotional depth of the gameplay experience, allowing players to navigate challenges like those they face in reality.
Is inZOI a Similar Game to The Sims?
inZOI and The Sims represent two distinct approaches to life simulation gaming. One significant difference lies in the level of control players have over their environments; inZOI's inclusion of city editing and decoration allows for a more comprehensive gameplay experience compared to The Sims, which primarily focuses on individual households.
Moreover, the inZOI game's focus on user-generated content through its Canvas platform enhances community engagement by allowing players to showcase their creativity extensively. This feature contrasts with The Sims, which has more restricted sharing options. Additionally, inZOI's dynamic interactions reflect real-life social complexities more effectively than The Sims, encouraging deeper engagement with characters as they navigate various challenges. Overall, while both games cater to fans of life simulation, inZOI's innovative mechanics and community-focused elements provide a fresh perspective that distinguishes it from the established formula of The Sims.
inZOI Game Platforms
inZOI is set to be available on multiple platforms. Initially available on PC via Steam at launch, it’s expected to expand to consoles such as PlayStation 5 and Xbox in subsequent updates according to announcements on the inZOI Discord channel. PC players might want to consider machines like the Predator Helios Neo 16 Gaming Laptop. It exceeds the game's recommended system requirements, ensuring smooth gameplay for users seeking high-performance gaming experiences.
Will inZOI Be Free?
As of now, there’s no information on whether inZOI will be free to play. However, players can add the game to their wishlist on platforms like Steam to stay updated on any announcements regarding pricing and availability.
For news and insights about gaming, AI, gadgets, and the tech-rich lifestyle, subscribe to the Acer Corner Email Digest.
Recommended Products
Predator Helios Neo 16
Gaming Laptop
Shop Now
Nitro 16
Gaming Laptop
Shop Now
Nitro 5
Gaming Laptop
Shop Now
About Lalaine Capucion: Lalaine has been working as a freelance writer and editor for more than 12 years, focusing on lifestyle, travel, and wellness. When she isn't writing, she's most likely curled up with a good book or trying out a new recipe in the kitchen. She lives in Metro Manila, Philippines.
-
Acer Iconia Tab M10: Ultra-Light, Sleek Tablet with Impressive Features
A tablet PC is a wireless computer operated by a touchscreen interface. Nestled somewhere between a laptop and a smartphone, tablets are usually around 7 to 13 inches (7.78 to 33.02 cm) in size. Tablet PCs are portable, comfortable to carry around, and do not require an external mouse or keyboard, making them a sound choice for users on the go. They typically offer a larger storage capacity than smartphones, so users can download applications and store photos and videos without worrying about running out of room. Moreover, tablets have a battery life comparable to laptops, benefiting those who want to catch up with work on a train ride, snap photos on a weekend getaway, or watch a series or movie during a flight.
Why you should buy a tablet PC
Most people nowadays own a smartphone. The number of smartphone users in the US alone was over 310 million in 2024, which is expected to grow as technology advances. Despite this, tablets are still a great option for those who want access to tech while on the move. Here are some reasons why a tablet PC may be a fitting addition to your tech arsenal.
1. Lightweight and portable
Tablet PCs are usually lightweight and ultra-portable, weighing around one-third of a standard laptop, making them an ideal travel companion. They slip easily into a briefcase or bag pocket and are easily accessible during journeys and commutes. Although larger than smartphones, tablet PCs are easier to transport than most laptops, so they are a top choice for frequent travelers.
2. Entertainment during travel
Traveling with a tablet PC means that entertainment is always at your fingertips. From eBooks to mobile games or streaming, tablet PCs offer personal entertainment for home or outdoors. They are excellent for watching movies or binge-watching a series on a screen bigger than a smartphone.
3. Suitable for meetings and presentations
Tablet PCs are user-friendly and suitable for use in various locations. For example, users can simply set up a tablet in the kitchen while playing music or following a recipe instead of transporting a bulky laptop. They are also handy for sharing meeting content such as presentations or other documents and are easier to transport than a laptop. By loading files on a tablet PC, users have work presentations on hand to make an outstanding impression during meetings.
4. Classroom-friendly
Technology is part of learning in today’s world. Schools could opt for tablets to facilitate interactive education instead of setting up multiple laptops around a classroom. Tablets are generally lower in cost than laptops and can be safeguarded by a protective case, keeping them safe from spillage or drops. They give kids access to the online world without investing in laptops, offering connectivity in the classroom.
Introducing the Acer Iconia Tab M10
The Acer Iconia Tab M10 is a lightweight tablet that is perfect for home or school use. Offering an ideal balance between education and entertainment, this sleek tablet boasts a 9-hour battery life and an ultra-light 430g design. But don’t be fooled by its lightweight form — the Acer Iconia Tab M10 possesses a 10.1-inch (25.65) WUXGA touchscreen to grab your attention while surfing the web, watching movies, or playing games.
This stunning tablet is just 8.6 mm thin, making it perfectly portable and slender enough to slip into a handbag or backpack. Users can flick smoothly between videos, photos, and games, so entertainment is always there during travel or downtime. Moreover, the Acer Iconia Tab M10 has dual-band Wi-Fi capability and 5 MP front and 8 MP rear cameras, facilitating crystal-clear video calls and high-resolution photos.
If that wasn’t reason enough to consider purchasing the Acer Iconia Tab M10, there are also kid-friendly apps to keep children safe as they swipe. Google Kids Space features quality educational content designed to engage children while protecting them from inappropriate materials. Parents can also choose to manage screen time and more with the Family Link app.
Acer Iconia Tab M10 Specifications
* Operating system: Android
* Processor type: MediaTek Cortex®
* Processor model: A73/A53 Heterogeneous Multi-Processor
* Processor speed: 2.0 GHz
* Processor core: Octa-core (8 Core™)
* Standard memory: 4 GB
* Memory technology: LPDDR4
* Supported memory card: microSD card reader up to 512GB (SDXC & exFAT compatible)
* Flash memory capacity: 128 GB
* Screen mode: WUXGA
* Screen resolution: 1920 x 1200
* Number of speakers: 2
* Wireless LAN standard: IEEE 802.11 a/b/g/n/ac/ax
* Bluetooth standard: Bluetooth 5.0 & GPS
* USB ports: 1 USB 2.0 (type-C) port
* Webcam resolution: 5MP webcam (front), 8MP webcam (rear)
* Keyboard type: Multi-touch screen
* Height: 0.33” (0.83 cm)
* Width: 9.5” (24.13 cm)
* Depth: 6.3” (16 cm)
* Weight (approx): 0.95 lbs (0.43 kg)
* Battery life: up to 9 hours
So, are tablet PCs really worth the hype?
There are many advantages to owning a tablet PC instead of or in addition to a laptop and smartphone. They are lightweight, portable, and do not require a mouse or a keyboard, making them super convenient for use on vacation, in business meetings, or even in the classroom. The Acer Iconia Tab M10 ticks all of these boxes and more, with a 4GB memory and a sleek 8.6mm design. Check out this Acer tablet and more on the Acer online store.
Recommended Products
Iconia Tab M10
Buy Now
Iconia Tab P10
Buy Now
-
How Ideogram AI is Redefining Text-to-Image Generation
Transforming your ideas into exquisite visual content now takes only a few clicks, thanks to generative artificial intelligence (AI), and Ideogram 2.0 has made it even easier. This recently launched AI model introduces large leaps forward in both usability and capability. Today, we’ll explore what makes it a compelling creative companion for marketers, designers, and hobbyists.
Ideogram and other cutting-edge design tools work best when paired with the advanced capabilities of an AI laptop like the Acer Swift X 14. Tailored for creative work, this laptop has a powerful Intel Core Ultra processor, dedicated NVIDIA GeForce RTX graphics, and a brilliant WQXGA+ OLED display.
What is Ideogram 2.0?
Launched in August 2024, Ideogram 2.0 is the latest text-to-image model from Ideogram, a company focused on enabling creative expression with AI tools. Compared to its predecessors, Ideogram 2.0 offers significant improvements in image generation. It can create realistic images, stylized illustrations, and typography with remarkable accuracy and detail. It’s trained to understand context and aesthetic preferences, along with specific user instructions.
What sets this Ideogram AI model apart from the many AI-powered creative tools available? Let’s take a look at its innovative key features.
Unparalleled Image Quality
Ideogram 2.0 generates images with exceptional clarity, detail, and photorealism, outperforming other text-to-image models in user evaluations. Not only does it capture the nuances of texture, lighting, and composition, but it can also render coherent text within images. This is a notable feature that was missing from many existing generative models.
Enhanced Textual Understanding
Due to significant improvements in the model’s comprehension of natural language, it can accurately interpret and respond to a broader range of text prompts. Generated images align more closely with users’ intended concepts and styles.
Diverse Style Options
Users can select from various artistic styles such as Realistic, Design, 3D, and Anime. This feature allows them to experiment with various approaches to visual content. It can also streamline the creative process for those with projects requiring a specific design aesthetic.
Advanced Color Palette Control
Ideogram 2.0 enables users to choose from suggested color palettes or build their own five-color custom palette. This feature facilitates greater artistic control, especially for designers and brands looking to maintain a cohesive visual identity.
Cutting-Edge Prompting Tools
Magic Prompt enhances your inputs by offering variations with more detail and creativity. Describe generates detailed prompts from your uploaded images or existing AI-generated ones you find in Ideogram Search. These advanced prompting features lead to endless iterations and new creative directions.
All in all, Ideogram 2.0’s main features give users greater flexibility and control over the creative process. You don’t need innate graphic design skills to explore different visual styles or achieve specific artistic effects. Ideogram’s improved interface and expanded options help you fine-tune the creative output effortlessly.
To accompany the Ideogram 2.0 web platform and API, its creators launched an Ideogram AI image generator app for iOS. (An Android version is in the works.) The official app retains all the functionalities of the web version while providing a streamlined experience for mobile users.
https://www.youtube.com/watch?v=IoF8hAbES7U
How Much Does Ideogram Cost?
Ideogram AI offers four subscription tiers to accommodate various user needs. The free plan gives users 10 slow credits daily, allowing for up to 40 images per month. It includes access to community galleries and the ability to download your creations as compressed JPGs.
Paid plans start with a Basic option providing 400 priority credits (approximately 1,600 images) per month and 100 slow credits a day. Its additional features include seamless tiling and custom aspect ratios. Plus and Pro subscriptions unlock Ideogram’s full capabilities, such as image uploads, custom color palettes, and private image generation. On top of their much higher priority credits, both plans offer unlimited slow credits.
Ideogram’s Vast Community and Image Library
Unlike many AI tools that operate in isolation, Ideogram is a thriving community-driven platform. It fosters a collaborative ecosystem where users can interact, share their output, and learn from one another. This enriches the overall experience and makes Ideogram more than just an image generation tool—it’s also a creative hub.
The focus on community engagement has led to an expansive library of user-created images. In the past year alone, more than one billion creations were added to this public repository. Whether you’re a newbie who’s curious about Ideogram’s capabilities or a long-time user looking for references and inspiration, you’ll find tons of ideas from images generated by users around the world. Paid subscribers can use Ideogram 2.0’s robust search feature to browse the community images more easily. You can filter by style or popularity, or enter specific keywords used in the original prompts.
For its diverse range of users, Ideogram 2.0 is redefining the boundaries of creative expression. AI-powered design tools like this are no longer just aids. They’re becoming true collaborators, enabling creators to explore new visual styles, streamline workflows, and push the limits of what’s possible in AI-generated imagery. As models like Ideogram become more sophisticated, we can expect even more innovative forms of art and storytelling to emerge, making it an exciting era for creatives across all disciplines.
Recommended Products
Swift X 14 Laptop
Shop Now
Aspire Spin 14 Laptop
Shop Now
Swift Go 14 Laptop
Shop Now
About Micah Sulit: Micah is a writer and editor with a focus on lifestyle topics like tech, wellness, and travel. She loves writing while sipping an iced mocha in a cafe, preferably one in a foreign city. She's based in Manila, Philippines.
-
The Swift 14 AI Laptop Featuring the AMD Ryzen™ AI 9 Processor
Do optimal productivity and a smarter, more efficient digital life appeal to you?
If so, bring a boost to your brilliance with Acer’s Swift 14 AI AMD laptop. This new range of Ryzen AI Copilot+ laptops embodies the latest level of AI performance, transforming your ideas into reality. This is a laptop that delivers AI excellence throughout the device. Powered by AMD’s Ryzen AI 9 processor, the Swift 14 AI laptop features groundbreaking on-device AI power.
In practical terms, this means up to 50 TOPS NPU AI performance to supercharge multitasking, and did we mention multi-day battery life? If you’re ready to smash your intense workloads with ease, and break on through to the other side of multitasking, then the Swift 14 Ryzen AI may be the tool you require. Read on to discover more about Ryzen AI, and get the downlow on Copilot+ PCs. Once we’ve covered the essentials, we’ll check out the Swift 14 AI Laptop - SF14-61T-R49D for a taste of things to come in the world of on-the-go AI enhanced productivity.
What is Ryzen AI?
Perhaps you’re familiar with NVIDIA and Intel’s AI engines, but what about AMD? Short for Advanced Micro Devices, AMD is a California based semiconductor company. Famous for their Ryzen CPUs, AMD offers superior multi-core performance and value over Intel processors. Ryzen AI is a natural evolution of AMD’s technological innovation as processors move towards on-device AI integration
Powered by XDNA architecture, (AMD’s neural processing unit microarchitecture), a Radeon GPU and Ryzen processor cores, Ryzen AI was first introduced mid 2023 with the Ryzen 7040 series. A year and a bit on, the AMD AI package takes a three-pronged approach with AI infused CPU, NPU, and GPU technology. Let’s dig a little deeper to find out more:
* AMD Ryzen AI 300 CPU: Crafted around the Zen 5 architecture, these punchy processors pack up to 10 high performance cores and 20 threads for optimum multi-threaded performance.
* AMD XDNA 2 NPU: The NPU (neural processing unit) is the on-device AI brain, empowering you to run local generative AI apps as well as LLMs on your laptop. The XDNA 2 is the latest generation of NPU architecture with up to 50 TOPS of AI processing power.
* AMD Radeon 800M GPU: Whether you’re gaming, editing or simply enjoying the hi-res display, RDNA 3.5 architecture is in your corner. The smoothest possible gameplay and jaw-dropping visuals are seamlessly delivered via hardware-accelerated encoding.
What’s a Copilot+ PC?
First unveiled in June at COMPUTEX 2024, Copilot+ PCs are a new breed of devices designed to streamline your daily grind with intelligent AI solutions. As you saw above, in addition to CPUs and GPUs, Copilot+ PCs have NPUs (neural processing units) to power AI applications and services. With on-device AI-infused hardware, Copilot+ PCs feature new Windows capabilities, multi-day battery life and 24/7 intelligent assistance.
Copilot+ PCs such as the Swift 14 AI represent the fastest, most intelligent Windows PCs ever, equipped with ultra-efficient on-device AI processing and innovation. In short, this new wave of PCs is set to become the new norm for AI-enhanced computing, where efficiency and speed combine to optimize performance.
Swift 14 AI AMD in focus
Now let’s take a closer look at Acer’s Swift 14 AI AMD laptop. There are a range of Swift 14 AI AMD models available, and today we’re going to check out what Acer’s Swift 14 AI Laptop - SF14-61T-R49D can do for you. Currently retailing for $1,199.99, this Copilot+ PC is stacked full of impressive features. Let’s take a peek at the tech specs:
* Operating System: Windows 11 Home
* Processor: AMD Ryzen AI 9 365 Deca-core
* Processor Speed: 4 GHz
* Processor Speed (turbo): 5 GHz
* GPU: AMD Radeon™ 880M dedicated memory
* Display: 14-inch WUXGA (1920 x 1200) 16:10 IPS 60 Hz Touchscreen
* Display Screen Technology: ComfyView (Matte); In-plane Switching (IPS) Technology; Eyesafe
* Memory: 16 GB LPDDR5X
* Storage: 1 TB SSD
* Wireless: IEEE 802.11be
* Built in Devices: Microphone, webcam, dual speakers, fingerprint reader
* Interfaces/Ports: 2 x USB 3.2 Type-A, 2 x USB-C with USB4, headphone jack
* Input: Backlit keyboard, Touchpad
* Color: Pure Silver
* Dimensions: 12.32 x 8.74 x 0.39 - 0.7 inches
* Weight (Approx): 2.91 lbs
Unfold with a plan that won’t fold
A versatile laptop is an essential tool for on-the-go professionals. The Swift 14 AI is beyond versatile, once it's in your bag you may not even realize that it's there. Weighing in at 2.91 lbs, this laptop weighs about the same as your brain, or a medium-sized cat, for reference. Lightweight and ultra-thin, the sleek and stylish laptop is merely 0.39-0.7 inches in height. In today’s world of work, no two jobs are exactly the same, and the Swift 14 AI is ready to adapt, as the 2K touch IPS display opens a full 180 degrees.
Effortless AI
It’s easy to sing the praises of the AI revolution in terms of TOPS, computing power and NPUs. In reality though, the newfangled hardware and software needs to deliver tangible results from first use. A remarkable feature of the Swift 14 AI is the battery life, delivering up to 27 hours of use between charges. This is clearly a game changer for workers who may not always be within reach of a power supply.
Moving on to the supercharged AI performance, Copilot+ PCs are designed to be an extension of your workflow. Copilot is your on-hand AI assistant ready to find solutions and inspirations to support your collaboration and creativity. Recall provides you with an explorable timeline of your PC to find the things you need with minimal effort. Video calls and meetings are also augmented with Windows Studio Effects and real-time translation and subtitles in over 40 languages.
These Windows AI solutions are complemented by Acer’s very own suite of intuitive AI that’s easy to use from the get go. AcerSense is a hotkey to access all of your Swift 14 AI laptop’s AI features delivering a user-friendly AI experience. Acer User Sensing 2.0 detects your presence for secure sessions and quality-of-life features to help with hands-free multi-screen navigation.
Final considerations
That’s about it for today, we hope that you’ve enjoyed learning about AMD’s AI endeavors, as well as the basics of Copilot + PCs, and of course Acer’s Swift 14 AI AMD laptop. Bursting with a range of great features designed for efficient, immersive computing experiences, the Swift AI AMD is a stylish, lightweight powerful AI integrated device that’s ready to boost your brilliance. The final question is -are you ready? For more info, be sure to have a read of the Swift 14 AI AMD page.
Recommended Products
Swift 14 AI (AMD)
Buy Now
Swift 14 AI (Qualcomm)
Buy Now
-
Destiny 2 Revenant Episode Guide: New Weapons, Builds, and Future Updates
Destiny 2 is currently navigating the aftermath of The Final Shape expansion, which serves as a climactic conclusion to the long-standing Light and Darkness saga. This expansion not only resolves key narrative arcs, but also sets the stage for future developments in the Destiny universe. Game developer Bungie has introduced a new episodic format to explore the consequences of this pivotal chapter through three interconnected episodes: Echoes, Revenant, and the upcoming Heresy.
Revenant: Act I
In Revenant, players embark on a journey that picks up where Echoes left off. Act I, launched on October 8, 2024, features weekly challenges and introduces players to a darker narrative centered around Fikrul the Fanatic—a character previously encountered in Forsaken. Taking up the mantle of Slayer Baron, Guardians go against Fikrul, who has seized control of an Echo and is utilizing its powers to forge a new army of darkness.
Players have access to a variety of new weapons, builds, and gameplay updates designed to enhance the Guardian's combat capabilities. When it comes to Destiny 2 builds, the Stasis Warlock build remains a top choice. Focusing on crowd control and area denial, this build utilizes the Osmiomancy Gloves exotic to enhance Coldsnap grenades. Pair this with aspects like Iceflare Bolts and Glacial Harvest to create a constant stream of Stasis shards, boosting ability regeneration and survivability in challenging encounters.
Hunter mains should consider the Void-based Nightstalker build, emphasizing invisibility and debuffing enemies. The Omnioculus exotic chest piece synergizes perfectly with Smoke Bomb, providing damage resistance and extra melee energy. Combine this with aspects like Trapper's Ambush and Stylish Executioner to maintain near-constant invisibility, making you an invaluable asset for team survivability and revives.
The Prismatic Titan build, featuring the Icefall Mantle, focuses on maximizing defense and offensive capabilities. With the Prismatic subclass, Titans gain access to a variety of abilities that enhance survivability and damage output. The Icefall Mantle exotic provides additional defensive benefits, granting Frost Armor and healing when using Stasis abilities. Good aspects for pairing include Diamond Lance, Tectonic Harvest, and Cryoclasm.
Onslaught: Salvation
Act I of Revenant introduces Onslaught: Salvation, a high-stakes activity in which players must navigate through waves of Fikrul's undead Scorn on all-new maps to rescue captured Eliksni, also known as the Fallen. The activity emphasizes strategic positioning and teamwork, with new objectives and defenses to overcome.
The loot pools for Onslaught: Salvation feature several new weapons, including:
* Bitter/Sweet Grenade Launcher: A heavy weapon with Arc damage, it has an adaptive frame of 120 rounds per minute. Perks include Perpetual Motion, Reverberation, and Jolting Feedback.
* Insurmountable Sidearm: This Void weapon includes perks such as Lone Wolf, Destabilizing Rounds, and Threat Detector. It's capable of firing 260 rounds per minute.
* Liturgy Grenade Launcher: A Stasis special weapon with a double fire feature, it shoots two grenades simultaneously. Perks include Rimestealer, Chill Clip, and Chain Reaction.
These powerful additions to the arsenal offer Guardians new strategic options and enhance their combat capabilities. Whether these items will make it to the list of the best Destiny 2 weapons, only time will tell.
Vesper's Host
https://youtu.be/CrEps8C_eYg?si=p6UZXIVDC2R2rFTt
The Vesper's Host dungeon, another major highlight of Act I, offers players an exciting new challenge. To unlock access, Guardians must obtain the Final Shape Dungeon Key, available through the in-game store or as part of specific expansion bundles. Once unlocked, Vesper's Host opens up a mysterious, lore-rich environment filled with intricate puzzles and formidable foes.
Recently, the Contest Mode for Vesper's Host concluded, showcasing the skills of the Destiny 2 community. During this mode, players faced heightened difficulty levels, requiring meticulous strategy and teamwork to succeed. Highlights included impressive completion times and inventive gameplay strategies that demonstrated the depth and potential of the dungeon.
With greater chances for loot and increased play potential, Vesper's Host rewards persistence and skill. Weapons to unlock here include the improved Icebreaker sniper rifle, the 600-rounds-per-minute auto rifle VL Pyroelectric Propellant, and the special grenade launcher VL Velocity Baton.
Fieldwork
Players engage in both major and minor fieldwork to further the storyline and enhance gameplay. Major fieldwork tasks are designed to provide significant rewards and upgrades. One example is the Blood Drive upgrade, where players collect Reclaimed Vitality for a chance to obtain uncommon reagents. These tasks often require players to defeat powerful enemies or complete specific objectives across various locations, including Europa and Nessus, ultimately contributing to the overarching narrative about Fikrul the Fanatic.
Minor fieldwork, on the other hand, consists of smaller tasks that players can complete more quickly. These missions often involve collecting mysterious objects or defeating enemies using specific damage types, such as Solar or Stasis. For example, one minor fieldwork task requires players to assist Eido by collecting items on Europa while defeating enemies. Completing these minor tasks yields tonic reagent sacks, which are essential for potion crafting.
Together, both major and minor fieldwork activities enrich the gameplay experience by encouraging exploration and teamwork while providing valuable rewards.
What to Expect in Acts II and III
Act II of the Revenant episode in Destiny 2: The Final Shape is set to launch on November 19, 2024. This act will continue the dark narrative surrounding Fikrul the Fanatic. Players can expect new activities, including a potential return of the Tombs of Elders, alongside fresh loot and gameplay mechanics that will further enrich the experience and challenge Guardians.
Act III will follow on January 7, 2025, concluding the Revenant episode. This act is anticipated to bring significant revelations about character arcs and lore, as well as an exotic mission that may tie together various narrative threads introduced throughout the episode. Bungie's commitment to delivering a cohesive and engaging story will culminate in this climactic finale, ensuring players remain invested in the evolving world of Destiny 2.
The Destiny 2 DLC Final Shape is available on Xbox, PlayStation, and PC. For an optimal experience, PC gamers might want to upgrade to powerful machines like the Predator Orion 7000 Gaming Desktop, which features ample memory along with a high-performance Intel Core i7 processor and NVIDIA GeForce RTX 4080 graphics card.
What’s Ahead for Destiny 2
Bungie is transitioning Destiny 2 to a new content model, moving away from annual story campaigns and starting a new adventure called Codename: Frontiers. Starting in summer 2025 with the expansion Codename: Apollo, players will receive two medium-sized expansions and four free updates per year, ensuring a more dynamic and engaging gaming experience.
Moreover, Bungie aims to enhance player satisfaction with the introduction of rarer loot and new weapon tiers. Private player vs. player matches will also be available, adding a fresh competitive element. The goal is to keep the game exciting and rewarding for both new and veteran players.
Recommended Products
Predator Orion 7000
Gaming Desktop
Shop Now
Nitro 17 Gaming Laptop
Shop Now
Predator Triton Neo 16
Gaming Laptop
Shop Now
About Lalaine Capucion: Lalaine has been working as a freelance writer and editor for more than 12 years, focusing on lifestyle, travel, and wellness. When she isn’t writing, she's most likely curled up with a good book or trying out a new recipe in the kitchen. She lives in Metro Manila, Philippines.
-
How to Disable the Firewall in Windows 11
What is a firewall and how does it protect your network?
A firewall is a network security system that can be hardware-based, software-based, or a combination of both. It serves to monitor and control network traffic, creating a protective barrier between trusted internal networks and untrusted external ones, such as the internet. Firewalls are essential in preventing unauthorized access, malware infections, and other cyber threats by filtering suspicious data and blocking harmful traffic from entering a system. Advanced firewalls also perform deep packet inspections and can stop intrusions, further securing the network.
Why would you disable your firewall?
In some cases, you may want to disable your firewall, though this should generally be done cautiously and temporarily. Disabling the firewall could be necessary when troubleshooting network connectivity issues or if a firewall is mistakenly blocking legitimate applications or services. For example, you might disable it to allow a new device or service access to your network when the firewall is preventing proper communication. In such situations, disabling it can help you quickly determine whether the firewall is causing the problem.
What are the risks of disabling your firewall?
Disabling your firewall significantly increases the risk of malicious activity on your network. Without the firewall's protection, your system is vulnerable to attacks from hackers, malware, spyware, and other external threats. These can lead to data theft, unauthorized access, or even loss of control over your devices. Because the firewall acts as a crucial security barrier, turning it off, even briefly, can leave your network exposed, potentially resulting in financial damage or long-term harm to your devices. Always aim to re-enable the firewall as soon as possible after resolving any issues.
How to disable/enable your firewall in Windows 11
Disabling or enabling your firewall in Windows 11 is a relatively simple process that can be done through the built-in Windows Security settings. Follow the steps below to manage your firewall settings:
How to disable the firewall in Windows 11:
* Open Settings: * Click on the Start menu and select Settings (or press Windows + I to open Settings quickly).
* Go to Windows Security: * In the Settings window, navigate to Privacy & security on the left-hand menu.
* Under Privacy & security, click on Windows Security and then choose Firewall & network protection. This will open the Windows Security settings specifically for the firewall.
* Choose Your Network Profile: * You will see three network profiles: Domain network, Private network, and Public network. Select the network profile where you want to disable the firewall (for example, Public network).
* Turn Off the Firewall: * Under Microsoft Defender Firewall, switch the toggle to Off. This will disable the firewall for the selected network profile.
* Keep in mind that turning off the firewall could expose your device and network to unauthorized access and other risks.
How to enable the firewall in Windows 11:
* Go to Windows Security settings: * As in the previous steps, open Settings > Privacy & security > Windows Security > Firewall & network protection.
* Select the Network Profile: * Choose the network profile (Domain, Private, or Public) that you want to enable the firewall for.
* Turn On the Firewall: * Under Microsoft Defender Firewall, switch the toggle to On to enable the firewall for that profile.
Alternative to turning off the firewall:
If you need to use an app that’s being blocked by the firewall, instead of turning the firewall off completely, you can allow the app through the firewall. This way, you maintain security while enabling specific apps to work. You can do this by selecting Allow an app through the firewall in the Firewall & network protection settings and adding the specific application you need.
Recommended Products
Swift 14 AI (Intel Ultra)
Buy Now
Swift 14 AI (AMD Ryzen)
Buy Now
-
Declutter Your Browsing Experience with Chrome Ad Blockers
Browsing the web can feel like navigating a maze of distractions. Pop-ups, banner ads, and auto-playing video ads bombard you from every corner of the screen, often slowing down your experience and sometimes even obscuring the content you came to see.
This overwhelming onslaught not only disrupts the browsing experience, but can impact privacy, slow down page load speeds, and make it difficult to find relevant information. Constant ad exposure can also lead to frustration and lower productivity for users who just want a seamless, distraction-free online experience.
That’s where ad blockers come in. By filtering out unwanted ads, Chrome ad blockers help you regain control of your browsing. They streamline your experience, speed up page loads, and bolster your privacy by preventing ads from tracking your online behavior. Below, we look in more detail at the advantages of using ad blockers in Chrome, how to choose the best one, and tips for customizing them to fit your specific needs.
The Benefits of Using Ad Blockers for Chrome
Ad blockers are more than just tools for removing annoying pop-ups—they can significantly improve your overall online experience in several important ways.
Improved browsing experience: The most immediate and obvious benefit of installing a Chrome ad blocker is the dramatic improvement in your browsing experience. By removing disruptive ads, you can focus solely on the content that matters to you. A clutter-free environment helps you stay more productive and less irritated by distractions, whether it’s reading an article, watching a video, or shopping online.
Faster page load speeds: Ad-heavy websites can slow down your browser’s performance. Every ad, whether it's a banner, pop-up, or video, requires additional data to load, which can lead to significant delays, especially on slower networks. With fewer elements to load, pages render more quickly, allowing you to navigate websites with ease. For those who rely on speed and efficiency, ad blockers can be a game-changer.
Enhanced privacy: Many ads are equipped with tracking technology that monitors your online behavior. This data can be used to target you with personalized ads, which can feel intrusive. Ad blockers help protect your privacy by preventing these tracking scripts from collecting your data, making your online activity more secure and less visible to advertisers.
Better security: Unfortunately, not all ads are safe. Some malicious ads, known as "malvertisements," are designed to compromise your security by installing malware on your device or leading you to phishing sites. Chrome ad blockers act as an additional layer of security, blocking these harmful ads before they can pose a risk.
By incorporating a good Chrome ad blocker, you’re not only decluttering your browsing experience, but also making it faster, safer, and more private.
Top Ad Blockers for Chrome: A Quick Overview
When choosing the best Chrome ad blockers, the options can seem overwhelming. However, a few stand out from the crowd due to their performance, reliability, and feature sets. Here’s a quick overview of some of the best Chrome ad blockers you can install today.
uBlock Origin
Widely regarded as one of the most efficient ad blockers for Chrome, uBlock Origin goes beyond just blocking ads. It’s known for its minimal impact on system resources, allowing your browser to run smoothly even with multiple tabs open. The tool also offers customizable filtering, giving you more control over what content is allowed and what’s blocked.
AdBlock Plus
AdBlock Plus is a veteran in the world of ad blockers and remains a popular choice for those looking to avoid unwelcome ads on Chrome. In addition to blocking a wide variety of ad types, it includes features for accepting “non-intrusive ads,” giving users more control over their browsing experience. For those who want some ads but not the most aggressive ones, Adblock Plus is an excellent option.
Ghostery
Ghostery is both an ad blocker and a privacy protector, making it a top choice for users concerned about tracking. It offers comprehensive tracking protection, allowing you to see and control which companies are tracking your online activity. It also provides an intuitive interface and real-time insights into which trackers are being blocked.
Privacy Badger
Developed by the Electronic Frontier Foundation (EFF), Privacy Badger is not a traditional ad blocker, but rather a privacy tool for blocking invisible trackers. While it does block some ads, its primary purpose is to learn which advertisers are tracking you and automatically block their tracking mechanisms. It does not rely on predefined block lists (like some ad blockers do), but instead, it detects and blocks trackers based on their behavior.
Key Features to Look for in a Good Chrome Ad Blocker
When choosing an ad blocker for Chrome, focus on features that not only block ads effectively, but also enhance your overall experience.
Customizability: Look for tools that allow you to adjust which types of ads are blocked, or how aggressively they filter content. For example, you might want to block video ads but allow certain types of display ads.
Efficiency: A good ad blocker should work quietly in the background without slowing down your browser or hogging system resources. Look for options that efficiently block unwanted ads without affecting your browsing speed.
Pop-up and video ad blocking: These types of ads can be the most intrusive, so choose a blocker that handles them well. The best Chrome ad blockers are equipped with the technology to stop pop-ups and autoplay videos from disrupting your experience.
Whitelist options: Although blocking ads improves browsing, you may want to support certain sites that rely on ad revenue. A good ad blocker will include a whitelist option, so you can disable the blocker for specific sites you choose to support. This ensures you can contribute to content creators without being bombarded by unwanted ads elsewhere.
Security features: Beyond blocking ads, look for ad blockers that also protect against malware and trackers. An ad blocker with built-in malware and tracker protection adds an extra layer of security, keeping your personal data safe while you browse.
Easy Steps to Install a Chrome Ad Blocker
You can install an ad blocker on Chrome in just a few clicks. Follow these simple steps and enjoy a clutter-free browsing experience:
* Select an ad blocker: Navigate to the Chrome Web Store via your search engine or directly through your browser, then search for one of the popular ad blockers like those above. You can also search for “best ad blockers” for a list of options.
* Add to Chrome: Once you’ve selected the right extension, click on the “Add to Chrome” button. A pop-up will appear asking for confirmation. Click “Add Extension” to proceed.
* Activate the extension: After installation, you’ll see the ad blocker icon appear in your browser toolbar. Click on it to open the settings or just leave it activated by default. Your ad blocker is now ready to start removing unwanted ads.
Using an ad blocker on a device optimized for fast browsing, like the Acer Chromebook 311, can make your online experience even smoother. The Chromebook’s fast performance and Chrome OS compatibility ensure that ad-blocking extensions run efficiently.
Troubleshooting Common Issues with Chrome Ad Blockers
While ad blockers are great for improving your browsing experience, you may occasionally encounter issues. Here’s how to troubleshoot the most common problems:
Some ads still appear: If you’re seeing ads despite having an ad blocker enabled, it could be due to outdated filters or settings. Start by updating the extension to ensure you have the latest version. Next, check your ad blocker’s filter lists and make sure they are enabled. Adding additional filter lists that block specific ad types (like video ads) can also help.
Sites requesting to disable the ad blocker: Some websites detect ad blockers and ask users to disable them in order to access content. If this happens, you can either whitelist the site or look for an option to bypass the blocker’s detection in the ad blocker’s settings. Some ad blockers have a feature that prevents sites from knowing the blocker is active.
Conflicts with other extensions: Ad blockers can sometimes conflict with other Chrome extensions, leading to slowdowns or incomplete ad blocking. To resolve this, try disabling other extensions one by one to identify which one is causing the conflict. If you find an extension that interferes with your ad blocker, consider disabling it permanently or finding an alternative.
Extension not working properly: If your ad blocker isn’t functioning as expected, it might need to be refreshed or reinstalled. First, try disabling and re-enabling the extension. If the problem persists, remove the ad blocker from Chrome and reinstall it from the Chrome Web Store to ensure a clean installation.
The Future of Ad Blockers
The future of ad blockers is set to be shaped by a stronger focus on privacy, advanced technologies like AI, and tighter integration with browsers. As ad blockers evolve to tackle more sophisticated ads and trackers, we can expect them to offer greater control over user privacy while keeping browsing experiences smooth and ad-free. However, as advertisers develop evasion techniques and "acceptable ads" models gain traction, the landscape will shift, with users having more say over which ads to block or allow.
Additionally, ad blockers for mobile, increased regulation of digital advertising, and ad-free subscription models may change the way users engage with content and ads online. As the balance between protecting user experience and supporting content creators continues to evolve, ad blockers will play an important role in shaping the future of digital advertising.
To keep up-to-date with the latest in tech and tools to improve your digital experience, subscribe to the Acer Corner email digest for expert tips and industry news.
Recommended Products
Acer Chromebook 311
Shop Now
Acer Chromebook Spin 514
Shop Now
Aspire 15 Laptop
Shop Now
About Maxine Sheppard: Maxine is a writer and editor who specializes in topics ranging from travel, tech and music to wildlife and design. When not writing, you might find her driving through a national park with the radio on loud.
-
Essential Windows 11 Shortcuts for 2024
Sometimes life's greatest joys are found in the journey itself, not just in reaching the destination in the shortest time possible. On road trips, in relationships, and when mowing the lawn, we should make the most of every moment, and avoid shortcuts. These fleeting moments once gone, will never return. When it comes to computing, however, shortcuts are clearly preferable to savoring the journey.
No one wants to spend more time than necessary navigating endless menus or scrolling in search of something that may never materialize. In short, shortcuts (combinations of keys) are a key part to streamlining your workflow and maximizing your productivity.
To help you with this, we’re going to cover the essential Windows shortcut keys that you need to know in 2024. Read on to discover what shortcuts are, and why you should be using them. Once we’ve covered the basics, we’ll drop the knowledge of a range of Windows shortcuts that will make your life better.
What are shortcuts?
As the name suggests, shortcuts are ways to get where you’re going at a faster speed than taking the regular route. In Windows there are often several ways to arrive at the same destination. Shortcuts use a combination of keys to complete tasks that otherwise might require trawling through menus or accessing system settings. This might make more sense with a concrete example: you’re getting display issues after updates and need to restart your graphics driver. Taking the traditional route through the device manager would require you to:
* Right-click the Start menu and select Device Manager.
* Next, expand the Display adapters.
* Right-click your graphics driver (e.g., Intel, NVIDIA) and select Disable device.
* After disabling it, right-click it again and select Enable device to restart it.
Alternatively, take the shortcut to restart your graphics driver, simply hit:
* Windows + Ctrl + Shift + B
As this tasty example shows, for those in the know, shortcuts provide fast, simple routes to a range of everyday computing tasks including file management and editing, desktop management, navigation and searching, as well as several more specialized functions.
Why take the shortcut?
Let’s face it, repeating the same task over and over quickly becomes a drag. By minimizing the time we spend doing repetitive actions in Windows 11, we can maximize our workday and amplify our productivity. By integrating shortcuts into your daily routine, you’ll reach your destination quicker, cut down on excessive mouse usage, and enjoy a smoother, more refreshing Windows experience. What’s more, keeping your PC organized, as well as performing complex tasks swiftly with a few keystrokes will contribute to an enjoyable and dynamic computing experience.
Essential shortcuts for Windows 11
Now that we’ve discussed the basics, let’s get stuck into the must-know shortcuts for Windows 11 in 2024. If you use a PC daily, then over a lifetime, basic editing and file management shortcuts could potentially save you up to a year of full-time work.
The first section, Basic editing and file management may include some shortcuts that you already know. If so, that’s great, feel free to skip to the next section. Equally, if these are all new to you, welcome to the world of shortcuts. Take your time, and enjoy the journey!
1. Basic editing and file management
* Ctrl + C – Copy the selected item.
* Ctrl + X – Cut the selected item.
* Ctrl + V – Paste the copied or cut item.
* Ctrl + Z – Undo the last action.
* Ctrl + Y – Redo the last undone action.
* Ctrl + D – Delete the selected item and move it to the Recycle Bin.
* Shift + Delete – Permanently delete the selected item.
2. Window and desktop management
Navigate your PC like a seasoned sailor on the ocean with these window and desktop management shortcuts. Master these shortcuts to move the active windows where you want them. Hit the shortcut key to minimize the window, then the shortcut key to maximize a window and see how much time you can save!
* Alt + Tab – Switch between open applications.
* Alt + F4 – Close the active window or application.
* Windows + D – Show or hide the desktop.
* Windows + Up Arrow – Maximize the active window.
* Windows + Down Arrow – Minimize or restore the active window.
* Windows + Left/Right Arrow – Snap the active window to the left or right side of the screen.
* Windows + Shift + Left/Right Arrow – Move the active window to another monitor (for multi-monitor setups).
* Alt + Space – Open the window menu for the active window (minimize, maximize, etc.).
3. System and task management
Optimize your computer’s performance and keep things organized with system and task management shortcuts. Execute admin tasks with ease and keep track of security options with the strike of a few keys.
* Ctrl + Shift + Esc – Open Task Manager.
* Ctrl + Alt + Delete – Open the security options screen (lock, switch user, Task Manager, etc.).
* Windows + I – Open the Settings app.
* Windows + R – Open the Run dialog box.
* Windows + Ctrl + Shift + B – Restart your graphics driver.
4. Navigation and search
Find what you’re looking for without searching all over your computer. For multilingual users the switch input language shortcut is a super time saver.
* Windows + E – Open File Explorer.
* Windows + S – Open Search.
* Windows + T – Cycle through apps on the taskbar.
* Windows + Number (1-9) – Launch or switch to the app in the corresponding taskbar position.
* Windows + Spacebar – Switch input languages or keyboard layouts.
5. Virtual desktops
Manage multiple desktops on your PC via these handy shortcuts. Separate your tasks and cut through the clutter to quickly create and switch between virtual desktops.
* Windows + Tab – Open Task View (see open windows and virtual desktops).
* Windows + Ctrl + D – Create a new virtual desktop.
* Windows + Ctrl + Left/Right Arrow – Switch between virtual desktops.
6. Accessibility and screen management
Swiftly adjust settings and navigate your screen, as well as access the assistive technologies Windows 11 provides with these handy shortcuts.
* Windows + +/- (Plus/Minus) – Zoom in or out using the Magnifier.
* Windows + G – Open Xbox Game Bar for screen capture and gaming tools.
* Windows + H – Activate voice dictation.
* Windows + P – Open projection settings (extend, duplicate, etc.).
7. Special functions
These special functions deliver rapid commands including the window screenshot shortcut key. Learn these special function shortcuts for an elevated PC experience.
* Windows + L – Lock your computer.
* F2 – Rename the selected item.
* Ctrl + Shift + N – Create a new folder in File Explorer.
* Windows + Shift + S – Take a screenshot using Snip & Sketch.
* Alt + Enter – Show properties for the selected item.
Shortcut to success
There’s no shortcut to learning these shortcuts. While they may take a while to master, once you’ve got a hang of using them, they’ll revolutionize your Windows experience. Equipped with these shortcuts, you’ll soon become a computer commander, not a mere PC user.
As we mentioned above, start simple and build your way up to the more advanced shortcuts. With the shortcut know-how, you’ll be able to perform a range of tasks seamlessly, streamline your workflow and maximize your performance. What are you waiting for? Start shortcutting today!
Recommended Products
Swift 14 AI (Intel Ultra)
Buy Now
Swift 14 AI (AMD Ryzen)
Buy Now
-
How to Get Better at GeoGuessr
GeoGuessr is an engaging online geography game that challenges players to identify locations around the world using Google Street View images. By observing visual clues—such as languages on signs, architectural styles, and natural landscapes—you can guess your exact location and enhance your geographical knowledge. You can play GeoGuessr by visiting their official website at www.geoguessr.com. To help you improve your skills and become a GeoGuessr expert, we've compiled a list of tips and strategies that cover everything from recognizing languages and scripts to developing a systematic approach.
1. Learn to recognize languages and scripts
Recognizing different languages and scripts is a fundamental skill in GeoGuessr that can significantly narrow down potential locations. By familiarizing yourself with the visual appearance of various alphabets and writing systems, you can quickly identify or eliminate regions. For instance, distinguishing between scripts like Cyrillic, Latin, Arabic, and various Asian characters helps focus your search area. Understanding nuances within a language family, such as the difference between traditional and simplified Chinese characters, can further refine your guess. If you encounter signs written in traditional Chinese characters (繁體字), you're likely in Taiwan, Hong Kong, or Macau, where traditional script is used. Conversely, signs with simplified Chinese characters (简体字) indicate you're in mainland China or Singapore. Recognizing these distinctions helps you narrow down your location within Chinese-speaking regions and demonstrates the importance of attention to linguistic details.
2. Observe road signs and traffic rules
Road signs and traffic patterns offer valuable clues about your location. Different countries have unique road signage designs, including shapes, colors, fonts, and symbols. Familiarity with these can help you identify where you are. For example, European countries often have blue motorway signs, while in the United States, interstate signs are typically red, white, and blue shields. Noticing which side of the road cars are driving on can eliminate half of the world's countries. Understanding regional traffic laws, such as speed limits posted in miles per hour versus kilometers per hour, can further refine your guess. Observing that vehicles are driving on the left side of the road, road signs are in English, and speed limits are posted in kilometers per hour suggests you're in Australia or New Zealand rather than the United Kingdom, where speed limits are in miles per hour. Paying attention to road markings, such as solid or dashed lines and their colors, can also provide hints about specific countries.
3. Analyze the landscape and vegetation
The natural environment is a rich source of information in GeoGuessr. Different climates and biomes have characteristic landscapes and vegetation. Observing the types of trees, plants, and general terrain can help you deduce the climate zone and, consequently, narrow down the possible regions. For example, palm trees indicate tropical or subtropical areas, while coniferous forests suggest temperate to cold climates.
Mountainous terrains with snow-capped peaks might point to alpine regions like the Swiss Alps or the Himalayas. Spotting vast fields of lavender and rolling hills could suggest you're in the Provence region of France, while seeing rice paddies with terraced hillsides might indicate a Southeast Asian country like Indonesia or the Philippines. Soil color can also be indicative; red soil might suggest parts of Africa or Australia. Being attentive to these natural clues enhances your ability to make educated guesses about your location.
4. Look at architectural styles
Architecture often reflects a region's history, culture, and climate, making it a valuable clue in GeoGuessr. Building materials, design elements, and construction styles can vary widely from one country to another. Traditional wooden houses with steep roofs are common in snowy regions to prevent snow accumulation, such as in Switzerland or Japan. In contrast, whitewashed buildings with flat roofs might be found in Mediterranean countries like Greece.
Urban architecture, such as the style of apartment buildings or public structures, can also be telling. If you see buildings with intricate latticework and colorful tiles, it might suggest you're in Morocco or Spain, reflecting Moorish architectural influence. Alternatively, red-brick row houses could indicate you're in parts of the United Kingdom or the northeastern United States. Recognizing these architectural cues requires some familiarity with global building styles but can greatly improve your ability to pinpoint locations.
5. Check for currency and units
Noticing currency symbols and units of measurement on signs, advertisements, or storefronts can provide direct clues about your location. Currency symbols like the dollar sign ($), pound (£), euro (€), yen (¥), or others can point you to specific countries or regions. Observing whether distances are measured in miles or kilometers can help distinguish between countries like the United States (uses miles) and most other countries (use kilometers). Price levels can also be indicative; seeing high numbers next to currency symbols might suggest countries with weaker currencies. For instance, a gas station sign displaying fuel prices in pesos, with distances in kilometers, might indicate you're in Mexico, Chile, or another Latin American country that uses the peso. This information is particularly useful in urban areas where such signs are more prevalent.
6. Use the sun for orientation
The position of the sun can help determine whether you're in the Northern or Southern Hemisphere. In GeoGuessr, the compass can be used to see where the sun is in the sky. If the sun is predominantly to the north, you're likely in the Southern Hemisphere; if it's to the south, you're probably in the Northern Hemisphere. This technique isn't foolproof due to time of day and the Earth's tilt but can still provide a general indication.
Observing the length and direction of shadows can help estimate the time of day and latitude. Noticing that the sun is low in the northern sky, casting long shadows to the south, might suggest you're in the Southern Hemisphere during winter months, perhaps in countries like South Africa or Australia. This method requires practice but can be a valuable tool in narrowing down your location.
7. Pay attention to license plates and vehicles
License plates often have unique designs, colors, and formats that can indicate the country or even the region within a country. Some countries use distinct color schemes or have national symbols on their plates. For example, European Union countries have a blue strip on the left side with the country code. Certain vehicle makes and models are more common in specific regions. Emergency vehicles, taxis, and buses may have distinctive markings or colors that are region-specific. Noticing that vehicles have license plates with a blue strip on the left and a white background with black numbers, and that many cars are French-made brands like Renault or Peugeot, suggests you're in France or a neighboring EU country. Recognizing these vehicular clues can significantly narrow down your options, especially in urban settings.
8. Practice specific regions
Focusing your practice on specific regions can deepen your familiarity with their unique characteristics. By repeatedly exploring a particular area, you'll become more attuned to subtle differences in landscape, architecture, language, and other local features. This targeted practice can be especially useful if you frequently encounter difficulty distinguishing between similar regions. Over time, you'll build a mental database of regional cues that can be quickly recalled during gameplay. For example, if you often confuse Scandinavian countries, dedicating time to practice in Norway, Sweden, and Finland can help you notice differences like road sign styles, language nuances, and landscape variations. This approach not only improves your GeoGuessr performance but also enhances your overall geographical knowledge.
9. Use external resources for learning
Engaging with online communities, tutorials, and educational content can greatly enhance your GeoGuessr skills. Platforms like YouTube have experienced players who share strategies, tips, and insights. Forums and social media groups allow you to discuss challenges, share discoveries, and learn from others' experiences. Studying maps, flags, and global data can also provide useful knowledge. External resources can introduce you to identification techniques you might not discover on your own, accelerating your learning curve and making the game more enjoyable. For instance, watching a tutorial on distinguishing different types of road markings across countries can help you quickly identify whether you're in the United States, Australia, or the United Kingdom based on the color and style of the lines.
10. Develop a systematic approach
Establishing a consistent method for analyzing each GeoGuessr location ensures that you consider all available clues and make informed guesses. Start by performing a quick 360-degree scan to gather immediate impressions. Note the language on signs, the general environment, and any prominent features. Then, delve into specifics like road signs, vehicle types, and architectural details. By following the same steps each time, you reduce the chance of overlooking important information. This structured approach enhances efficiency and accuracy, particularly under time constraints. For example, your systematic approach might be: first, check for language on signs; second, observe driving side and road markings; third, analyze vegetation and terrain; fourth, look for architectural styles; finally, consider any unique features before making your guess.
11. Practice regularly
Consistent practice is key to improving your GeoGuessr skills. Regular gameplay helps reinforce your knowledge of different regions and makes it easier to recognize patterns and clues. Playing various game modes, such as timed challenges or country-specific maps, can keep your practice sessions engaging and diverse. Over time, you'll build muscle memory for recognizing certain features and improve your ability to make quick, accurate judgments. Regular practice also keeps your geographical knowledge fresh and up to date. Setting aside time each day to play a few rounds, perhaps starting with a world map and then focusing on specific regions where you want to improve, can steadily enhance your performance.
12. Stay updated on GeoGuessr updates
GeoGuessr regularly adds new content, maps, and features, which can introduce fresh challenges and learning opportunities. Staying informed about these updates ensures you're aware of new areas to explore and can adjust your strategies accordingly. Exploring newly added regions expands your geographical knowledge and keeps the game experience exciting. Updates might include changes to the user interface or game mechanics that can affect how you play. If GeoGuessr introduces a new map focusing on rural Japan, spending time exploring this map will prepare you for when these locations appear in general gameplay, giving you an edge over players unfamiliar with the new content.
You're on the map!
By applying these tips and strategies, you'll enhance your GeoGuessr skills and enjoy a more immersive and rewarding experience. Embrace the challenge, keep exploring, and watch your geographical knowledge grow with each game. Happy guessing!
Recommended Products
Swift 14 AI (Intel Ultra)
Buy Now
Nitro V 15
Buy Now
Click on 'Yes' if the comment answers your question!1
