Boot priority empty and no boot mode in acer swift-sf314-54 n17

yanas
yanas Member Posts: 2 New User
edited May 13 in Swift and Spin Series

hello

I had a no bootable device issue and I bought a ssd. In bios I have no boot order priority and no boot mode. I tried with F12 and I have also nothing there. Tried also with usb stick, doesn t appear but my new ssd appears in the bios information.

Could you please help ? I dont know if it is a bios issue or hardware issue ? I checked the cables and everything seems to be good

[Edited the thread to add model number to the title]

Answers

  • ian1977
    ian1977 Member Posts: 3 New User

    hello there as it seems u have no bootable device detected go to advanced settings and check the sata mode it should be set to AHCI not IDE also press F9 to restore factory default. it could be just a matter of tweaking settings what model of acer laptop is it please

  • yanas
    yanas Member Posts: 2 New User
    edited May 12

    hello

    Thanks for your reply. I did everything above but still no bootable device and nothing appears in boot order priority or boot mode

    It’s a acer swift-sf314-54 series model n17w7

  • billsey
    billsey ACE Posts: 34,313 Trailblazer

    That is normal without an OS installed on the disk. You say you bought a new SSD, was the old one bad or were you just looking for more storage? Typically when replacing a SSD you clone the old drive to the new one, then put the new one in replacement for the old one and boot into your normal environment, but will a larger C: partition. If the old drive has gone bad then you need to reinstall the OS, which you do by booting into an install flash drive.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.