LinuxMint on a Travelmate P214 -55G BIOS version V1.07

BlueMonkey
BlueMonkey Member Posts: 5 New User

Trying to Install Linux Mint.
Won't boot from installation USB - LinuxMint 20.3
Tried several USB (made writable on Linux)
Turned Off secure Boot
Turned off VMD controller
Disabled TPM

error is :
[ 0.242621] ACPI BIOS error (bug); Could not resolve symbol (\_SB.PC00.RP08.CMDR]. AE_NOT_FOUND (202.10730/psargs-330)

Then a couple more lines referring to the above.
This is a clean Windows 11 machine (Windows on, but not set up)

Any help is very much appreciated.

Answers

  • BlueMonkey
    BlueMonkey Member Posts: 5 New User

    Further to the above - I can load in compatability mode.

  • billsey
    billsey ACE Posts: 34,672 Trailblazer

    With Secure boot off and the boot menu on you should be able to boot to a Linux install flash drive. Are the errors you are seeing after the Linux flash drive starts booting or before? You are correct in disabling the VMD controller to allow Linux to see the drive, so that's not an issue. ACPI errors at boot time are typically just warnings and can be safely ignored.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • BlueMonkey
    BlueMonkey Member Posts: 5 New User

    The error is prior to booting in to LinuxMint, prior to install.
    I get to the "Load Page",
    Start Linux Mint
    Start….compatibility mode
    OEM Install
    Boot from Next Volume
    UEFI Firmware settings
    Memory Test

    If I click on Start Linux Mint….it takes me to the error message and will not go any further. For a very split second, if watching closely, the Green Mint logo shows for a fraction.

    BIOS has been update to 1.14. Still the same error.
    This is Dual boot on same drive, not 2 separate SSD

  • billsey
    billsey ACE Posts: 34,672 Trailblazer

    Have you freed up space on the drive for Linux to use during it's install? By default there will not be any, so you usually have to shrink the system partition for Windows to allow for unallocated space that Linux will use to create it's partitions.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.