Acer Veriton X4710G Fan speed Control and CPU temp is sadly always over 90c

Overenthusiastic2334
Overenthusiastic2334 Member Posts: 3 New User

so, I got a new acer Veriton x4710g and the CPU temp is sadly always over 90c so i want to control the fan speed but so far, no success.

Programs I've used: Argus Moniter, MSI Afterburner

[Edited the thread to add issue detail]

Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer

    Turn PC on. Immediately tap DEL key to enter BIOS menu. Go to advanced section. Turn SmartFan off & save setting to see if MSI will assume manual control from BIOS.

    Jack E/NJ

  • Overenthusiastic2334
    Overenthusiastic2334 Member Posts: 3 New User

    It doest work

    The fan stays high all the time

  • JackE
    JackE ACE Posts: 45,080 Trailblazer

    If CPU is still over 90°C, the CPU fan will stay on high speed to avoid CPU damage.

    Jack E/NJ

  • Larryodie
    Larryodie Member Posts: 1,741 Community Aficionado WiFi Icon

    Inspect, clean any dirt blockage within the fan and vents.

    Depends on your room trmperature, thats not abnormal.

    Run a utility like Speccy for more informatin.

    Does the fan have a bearinng noise ? Replace if it does.

  • Overenthusiastic2334
    Overenthusiastic2334 Member Posts: 3 New User

    Alr so I kinda figured it out, (for some reason) The computer I have is a bit special since it is the only acer Veriton (ig) that has an i9 13900k in it and the cooling fan and system is the same as the i7 one so there is really nothing i could do

  • billsey
    billsey ACE Posts: 34,584 Trailblazer

    They did ship your Veriton X4710G models with an i9-13900 (65W), but not with an i9-13900K (125W). To run the K processor you will have to totally revamp the cooling to handle the extra power. If you want to keep that CPU in you need a replacement for the stock cooler.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.