I have an aspire tc-895 UA92 and was wondering if it's possible to transfer the whole motherboard

M34nie
M34nie Member Posts: 6 New User

I wanna transfer the motherboard of my aspire PC into a different case, but I'm not sure if there's any cases/towers that would be compatible with it, if anyone knows or has done this before some advice would be greatly appreciated

Best Answer

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Answer ✓

    Your Aspire TC-895 has a DTX form factor motherboard with an Acer specific 'diving board' off the front to bring the front ports out. A standard case will fit the motherboard, but the front ports will not be available without a lot of creative cabling.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    Answer ✓

    Your Aspire TC-895 has a DTX form factor motherboard with an Acer specific 'diving board' off the front to bring the front ports out. A standard case will fit the motherboard, but the front ports will not be available without a lot of creative cabling.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • themero
    themero Member Posts: 49 Devotee WiFi Icon

    i've done it with my aspire 1760 ( have a look through my posts , i posted a pic on one of them ). general rules would be to find one that says it accepts graphics cards up to 340mm ( that way you know it will be long enough for the board to fit ) and also make sure the bottom where the board mounts is completely flat ( so nothing on the case touches the bottom of the M/B causing possible shorting . I didn't realise the bottom had some raised bits where the HD's mount on the case i bought so had to cut them out to let the board lay completely flat . But it did the job and looks the part too !