Update Acer swift 1 with 256gds m.2 nmve please someone could help me with my upgrade.

Ken996
Ken996 Member Posts: 1 New User
edited August 2023 in Swift and Spin Series

hi,

please someone could help me with my upgrade. I just buy a hard drive disk 256gbs . Nmve for my Acer swift 1 and it did not appear anywhere in my laptop. Neither in desktop place or storage management.

Best regards

[Edited the thread to add issue  detail]

Answers

  • Puraw
    Puraw ACE, Member Posts: 14,501 Trailblazer

    First change SATA mode to AHCI in BIOS, press Ctrl+S to see the hidden Advanced options.
    If still no luck, in BIOS, disable the VMD controller (Intel® Volume Management Device).
    Also, when Clean installing Windows with VMD enabled, you have to have the IRST driver available before Windows setup will see the drives installed. Download IRST driver, extract it and save it (don't install) in Desktop, during the installation process, when it asks "Where do you want to install Windows?", you click Load driver (most probably in the lower left) and browse to the Desktop where you have saved the extracted folder, after the installation your system will recognize the SSD.

  • StevenGen
    StevenGen ACE Posts: 12,700 Trailblazer

    Which model Swift 1 do you have, the model should be SF11X-XX, can't give you exact advice as these laptops have M.2 SSD SATA-3 or the PCIe 3 M.2 SSD drives and you probably fitted the wong type of M.2 SSD type drive. that is why its not showing in your laptop, tell us if this drive is showing in File Explorer or Disk Management or bios?

  • billsey
    billsey ACE Posts: 34,932 Trailblazer

    Yes, there have been literally hundreds of different Swift 1 models over the years, with vastly different specs and features, in addition to the normal locales and such. Your full model number is usually on the same sticker as your serial number, it should look something like SF1xx-xxx-xxxx.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.