New Predator Orion 3000 PO3-640G-UR11- 3rd monitor not receiving a signal

Lilaq

I have a new Orion 3000 PO3-640G-UR11. I just tried to add a 3rd monitor and my PC recognizes all 3 monitors (all 3 are ASUS VA24EHE) in BOTH the Win11 display settings and in the nVidia control panel, BUT the 3rd screen says no signal. I have the latest nVidia driver and the monitor drivers. 2 of the monitors are plugged into the DisplayPorts and one is plugged into the HDMI. No matter how I rotate the ports/cables around, the PC will only display on whichever monitor is plugged into the HDMI port and ONE Display Port, and ignores the other monitor plugged into a Display Port. So all 3 monitors work, but will only display on the one plugged into HDMI and one of the two plugged into the Display Ports. Any ideas on what I can do to fix this?? Thank you!

[Edited the thread to add issue detail]

billsey

So do all three ports on the GPU function? It's not enough to test that all three monitors work on a known good port, you also should test that a known good monitor works on all three GPU ports. IIRC your 3060 have three DPs and an HDMI, do all three work when all connected to DP?