NVMe SSD Problem on Sf314-54g I can't even set the nvme mode on the BIOS, so what should I do?

Matty98
Matty98 Member Posts: 1 New User
edited March 2023 in Swift and Spin Series

Hi,
I've replaced the internal M2 SSD with a M2 NVMe 1tb WD Blue SSD.
I've cloned the old one to the new one and booted Windows.
Well, Windows is working slower as ever now. It freezes and keep stucking (before the replacement it was smooth).
I've also tried a fresh Windows install with no results.
If I do some benchmark I see that the SSD performs like 5 times lower than it should, it is a compatibility problem with the laptop?
Because everything it's locked up by Acer I can't even set the nvme mode on the BIOS, so what should I do? Switch to a M2 SATA SSD?
Officialy the NVMe SSD should be supported…

[Edited the thread to add issue detail]

Answers

  • JackE
    JackE ACE Posts: 44,470 Trailblazer
    edited March 2023

    It freezes and keep stucking (before the replacement it was smooth).

    1. If the old m2 SATA card still works OK, the WD may be bad. What model? SN750? SN550?
    2. What is the model number and capacity of the old SSD?

    Jack E/NJ

  • Can you tell me the bios version?

    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          

               
      egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :)