RAM and SATA SSD Upgrade for Acer Aspire 5 AS515-56

KanagawaTomasu
KanagawaTomasu Member Posts: 157 Skilled Fixer WiFi Icon
edited March 2023 in Aspire Laptops

RAM and SATA SSD upgrade for Acer Aspire 5 AS515-56-53DS

[Edited the thread to add model name to the title]

Answers

  • StevenGen
    StevenGen ACE Posts: 12,480 Trailblazer

    Download the software for the Crucial System Scan and do a scan of your laptop, as this scan will tell you all the compatible upgrades for ram and SATA3 2.5" HDDs and SSDs and M.2 SSD drives for your Aspire A515-56-53DS laptop.

  • KanagawaTomasu
    KanagawaTomasu Member Posts: 157 Skilled Fixer WiFi Icon
    edited March 2023

    Say Thanks! I will give that a try and let you know what happens. The Aspire laptop above, belongs to the Mrs.

    I am on my own Predator laptop right now. So I will post what I find out later.

    Cheers!

  • KanagawaTomasu
    KanagawaTomasu Member Posts: 157 Skilled Fixer WiFi Icon

    I installed 8 GB of DDR 4-3200 (taken out of my Acer Predator) into my Wife's Acer Inspire 5 for a total of 12 GB. (4 on the Mobo and 8 GB in the RAM slot) It showed right away in Windows System Information and in CPU-Z.

  • KanagawaTomasu
    KanagawaTomasu Member Posts: 157 Skilled Fixer WiFi Icon

    I also installed a 1TB Crucial MX 500 SSD. It was easier than expected, but also different than I expected. I found that the drive tray was clear. I almost did not see it. It was hung on simple pins even after you take out the screws. After you take it out and attach the SSD you have to place the tray back on the pins, before you can screw the tray down in it's place.

    Also the SSD ribbon cable was already attached to the MoBo, at the side of the WiFi card, not under the WiFi card, as I had seen in some videos. The ribbon cable was already routed in place, under the battery, with just the SATA connector showing. There was just barely enough slack to tilt the connector and attach it to the SSD, before fastening the tray and SSD down.

    All in all, I would say that it was very thoughtfully layed out for non technical users, like myself.

    One last note: when I turned on the Laptop, the new SSD already showed under "This PC." (I had formatted the SSD earlier.) So I just had to give it a name.

    The hardest part of the process, is getting the back cover off.

    There you have it.