Hello,
I have a helios 300 and I've had some issues with the computer's built-in temperature reading. For reference, the attached photo is a screenshot on cold boot of the laptop. It displays these temps for cpu for a few minutes before falling back to 60ish. In fact, any load on the cpu at all will cause the recorded temp to constantly shoot way up several tens of degrees before returning to normal. With more accurate tools like core temp, I can see the record thermals of my cpu fluctuating from 60-90 degrees despite the computer being completely cool to the touch. I've even confirmed with a thermal camera that the temps aren't higher than 40 degrees. This causes the fan to run 24/7 and it's quite annoying.
Before you suggest it, no, it's not the thermal paste or pads, I had this issue both before and after changing them. My guess is some fault with the cpu cores or something but I have no clue if there is anyways to fix that. I haven't messed with bios or anything ether, just normal use. Any suggestions or fixes would be appreciated.
Also linked is a video from core temp of when I open up a few new tabs. The video is not altered. You can see the temps fluctuated up and down very quickly
[Edited the thread to add model name to the title]
https://youtu.be/s0rnAaxuYBU