The upgrade process has been suspended. Please make sure the system meet both conditions below

JossBeaumon

I noticed that the coolers were spinning at full speed in a strange way, although the laptop just stood without tension, nothing was even running on it from the programs.I decided to just check what updates are available, updated Insyde Software - Firmware, Synaptics - HIDClass and just some Windows updates. Antivirus is not worth it.Rebooted the laptop and now when you turn on such an inscription on the screen. I reset the battery, I don't know what else to do. He is only a year and a half, 100 charge cycles, treated him carefully. On the forms I saw a couple of such problems in others, but the problem was not solved there.Sometimes, somehow, it still manages to turn on.

Resetting the battery through a small hole did. (pressed with a needle for 5 seconds).

"The upgrade process has been suspended. Please make sure the system meets both conditions below. Plug in AC adaptor. Battery capacity is more than 25%."

I suspect that this is either a virus or clumsy updates.

Puraw

Hi @JossBeaumon

You are not including your Laptop model nor what Windows version you are trying to update, if it is Windows11 you have to make sure that your device is compatible: https://www.acer.com/ac/en/US/content/windows-11-compatibility

Update your firmware from the Acer support site only, carefull with windows BIOS/Firmware upgrades, ignore if you don't have BIOS issues.

Check you battery condition with Windows Battery report (assuming your OS is Windows) type the following in an elevated Command Prompt (open as Administrator):

powercfg /batteryreport /output %USERPROFILE%\Desktop\battery_report.html

Click on the battery_report.html icon on your laptop and compare the fully charged capacity with the Designed Capacity, if this is 70% below the Designed Capacity you need a new battery ($50)

William_mk2

@JossBeaumon

I am really sorry for the inconvenience..   Let us do the basic steps first..

Doing the power drain and bios defaults will really help.  Kindly follow the steps given below:

Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and – sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.

If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

 

If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.   Hold the power button for 1 minute.  After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn’t bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it’s internal statistics.

Connect all the cables back and restart the computer.  

While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.   

 

It might also be the issue with battery, charger or power outlet.   Try to use the charger in a different room on a different power outlet.  Try to bypass the surge protector and connect it directly to power outlet.    Try to use an alternative charger if possible.    Try to turn on the computer without the charger and check it  ( as long as the battery is not drained out )  

Try windows x 

go to device manager 

expand Battery

right click on all the items below battery – uninstall 

Restart the computer 

 

It should work fine.. 

William_mk2

@JossBeaumon

If you are able to boot up your computer and if you are able to see the regular desktop and icons. Kindly follow the steps given below

Sometimes a simple system restore will fix the issue.. 

Try windows x

click on power shell admin or command prompt admin 

type rstrui

chose an earlier date on which your computer was working fine  

click on next, finish, yes

It will restore your computer to an earlier date 

if you get an message - system restore not completed - click on close 

It will show you all the icons..

Try and check whether it is working now ..

William_mk2

@JossBeaumon

If it is still not working then we have to do a refresh and reset

click on start - settings - update and security - recovery - reset this pc - get started 

or 

on start - type here to search - type reset this pc - click on reset this pc on the top  - click on get started 

It will show you keep my files and remove everything

chose keep my files 

chose the account - type the password - click on local reinstall - click on reset 

It will be in progress.. 

login to computer and start using the computer. 

If it is still not working 

click on start - settings - update and security - recovery - reset this pc - get started 

chose remove everything 

click on local reinstall - just remove my files - click on reset

It will be in progress

Note:

If you do refresh ( keep my files ) -  all your personal files like pictures, music , documents , videos  will still be intact.   Only the applications will be lost

If you do reset  ( remove everything )  - you are doing a factory default.   It will become like a day one computer.    It will wipe out everything and take your computer to day one like a new computer. 

You can also do the recovery in an alternative way..

There are two alt keys on the keyboard.  If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar.  The alt key on the right side will be looking like alt, alt gr or alt car.  Turn off the computer.  Hold the alt key on the left and tap f10 continuously.   It will go to repair mode. It will show you chose an option, continue, troubleshoot.   If it is not going to repair mode, turn off the computer.  Turn on the computer.  Hold the right alt key ( alt gr or alt car or alt )  and then tap f10 continuously.  It will go to chose an option continue and troubleshoot..

It will show you chose an option, continue, troubleshoot

Go to troubleshoot  -  click on reset this pc

click on keep my files  ( only applications will be lost )   chose your account and type your password   - click on local reinstall  - click on reset

It will be in progress 

If the keep my files option is not working 

Go to troubleshoot  -  click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset 

It will reinstall windows. 

If the just remove my files is not working..

Go to troubleshoot  -  click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset 

It will reinstall windows. 

Note: If you are not able to boot up your computer or if you are not able to load the windows or if you are not able to login to windows then you can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10  or alt gr + tapping f10 on the keyboard while turning on the computer.    Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.    Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above. 

JossBeaumon

Sorry, I got it. This was my problem.