Battery reset on Nitro 5 AN515-53

Edi_D5
Edi_D5 Member Posts: 1 New User

Hi guys I have a problem with my Acer Nitro 5 AN515-53 laptop the problem is as follows today I decided to disconnect the battery and tried to run it on charger only but when I tried to turn it on it started and stopped several times then I saw that it wouldn't start and I decided to reset the battery, however, after I did it, the laptop turned on but the screen does not turn on and does not read absolutely everything, I tried to connect it to a monitor to see if it is not from the display, nothing happened, what to do now I need help.

Best Answer

  • JackE
    JackE ACE Posts: 45,211 Trailblazer
    Answer ✓
    1. Unplug charger. Disconnect the battery pack again from the mainboard.
    2. Then press & hold power button for about a minute.
    3. Reconnect battery pack and fully assemble coveer with screws.
    4. Plug charger back in.
    5. Wait for battery charge LED to turn steady blue.
    6. Turn it on again and IMMEDIATELY start tapping the F2 key to try to enter the BIOS menu.
    7. If successful, press F9 to load BIOS defaults. Then F10 to save default settings and exit.

    Jack E/NJ

Answers

  • JackE
    JackE ACE Posts: 45,211 Trailblazer
    Answer ✓
    1. Unplug charger. Disconnect the battery pack again from the mainboard.
    2. Then press & hold power button for about a minute.
    3. Reconnect battery pack and fully assemble coveer with screws.
    4. Plug charger back in.
    5. Wait for battery charge LED to turn steady blue.
    6. Turn it on again and IMMEDIATELY start tapping the F2 key to try to enter the BIOS menu.
    7. If successful, press F9 to load BIOS defaults. Then F10 to save default settings and exit.

    Jack E/NJ