Gap between display and screen bezel the frame is not pressed tightly against the screen.

Andrew_Sn

Hello. I have a gap between the display and the laptop screen bezel. It is not too wide, but the frame is not pressed tightly against the screen. Is this normal?

[Edited the thread to add the issue detail]

Andrew_Sn

Hello, I found information that such gaps are the norm, since the frame at the top is not attached to anything. I can't have a broken clip since nothing happened to my laptop.

leonaip

https://community.acer.com/en/discussion/680025/gap-between-display-and-screen-bezel

that's normal mate unless there is a problem in the display

take care of the laptop by not placing heavy objects above it or with it while inside the bag

always put the laptop on the bag that comes with it when you bought it

StevenGen

https://community.acer.com/en/discussion/680025/gap-between-display-and-screen-bezel

What has happend is that the plastic as shrunk and your laptops screen bezels clip in that area has come lose, best is to unclip the bezel completley and check what has happened to the clips that secure the bezel in that area and use double sided tape to resecure this bezel. Don't use glue incase the bezel needs to be taken off again.

Andrew_Sn

Hello, I found information that such gaps are the norm, since the frame at the top is not attached to anything. I can't have a broken clip since nothing happened to my laptop.

leonaip

https://community.acer.com/en/discussion/680025/gap-between-display-and-screen-bezel

that's normal mate unless there is a problem in the display

take care of the laptop by not placing heavy objects above it or with it while inside the bag

always put the laptop on the bag that comes with it when you bought it

StevenGen

https://community.acer.com/en/discussion/comment/1183047#Comment_1183047

Those gaps are not normal with a bezel, as the bezel has moved or shrunk, on my Nitro 5 in the same spot the bezel shows no sign of any movement or separation and there is no gap, see below. As if you leave it it will get worse and then you will need to repace the bezel, its up to you what you do.