Laptop won't boot when internal hard drive is installed in PH315-54-760S

Options
boxset
boxset Member Posts: 2 New User
edited November 2022 in Predator Laptops

Hi this laptop has an option to upgrade it with a second drive (it came installed with an SSD). I put a hard drive in and it won't boot with it installed. I know the hard drive, cable etc work because strangely enough, if I plug it in after the computer boots, it is detected by Windows and works fine. I've tried to boot with the drive uninitialized, initialized/no partition and with a partition, but nothing seems to work. I can't even get to the BIOS setup with it plugged it, and the predator logo never shows up. It's just a black screen.


I don't know what the problem is and I'd rather have it connected internally rather than using the drive externally. The model is PH315-54-760S, please can use some help.

 [Edited the thread to add model name to the title]

Answers

  • William_mk2
    Options

    @boxset


    Please remove the second hdd as of now.


    While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear. Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.  


    I am really sorry for the inconvenience..  Let us do the basic steps first..


    Doing the power drain and bios defaults will really help. Kindly follow the steps given below:


    Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, you can find a pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and – sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer. Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery. Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door. Just below that you can find a latch. If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

     

    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.  Hold the power button for 1 minute. After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn’t bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it’s internal statistics.


    Connect all the cables back and restart the computer.  



    While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear. Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.  

     

    It might also be the issue with battery, charger or power outlet.  Try to use the charger in a different room on a different power outlet. Try to bypass the surge protector and connect it directly to power outlet.  Try to use an alternative charger if possible.  Try to turn on the computer without the charger and check it ( as long as the battery is not drained out )  


    Try windows x 

    go to device manager 

    expand Battery

    right click on all the items below battery – uninstall 

    Restart the computer 


    Now connect the 2nd hdd to the computer and check it.

     

    It should work fine.. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • boxset
    boxset Member Posts: 2 New User
    Options

    @William_mk2

    Thanks for trying to help but unfortunately it didn't work. I tried all these steps, but nothing.

    At this point I'm just going to have to go with using the drive externally. Very disappointed in acer.