Laptop has no display after windows system restore Aspire e1-432-4675

padawanjesus

I have a Acer Aspire e1-432-4675

It was working ok until I did a Windows system restore. Now I have no display. The power lights turn on, but I see nothing. I tried pressing F8 for safe mode, still see nothing. I tried pressing F2 for BIOS, it beeped, but I still see nothing.

Do you think this laptop may be fixable at all or is it a brick now?

[Edited the thread to add model name to the title]

William_mk2

@padawanjesus

Hold the fn + f5 , fn + f6 on keyboard and check whether you are getting the display back.

I am really sorry for the inconvenience..  Let us do the basic steps first..

Doing the power drain and bios defaults will really help. Kindly follow the steps given below:

Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, you can find a pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and – sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer. Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.

If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery. Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door. Just below that you can find a latch. If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

 

If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.  Hold the power button for 1 minute. After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn’t bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it’s internal statistics.

Connect all the cables back and restart the computer.  

While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear. Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.  

 

It might also be the issue with battery, charger or power outlet.  Try to use the charger in a different room on a different power outlet. Try to bypass the surge protector and connect it directly to power outlet.  Try to use an alternative charger if possible.  Try to turn on the computer without the charger and check it ( as long as the battery is not drained out )  

Try windows x 

go to device manager 

expand Battery

right click on all the items below battery – uninstall 

Restart the computer 

 

It should work fine.. 

padawanjesus

hello thank you for your response

i tried that unfortunately i can still not see anything on the screen

William_mk2

@padawanjesus

It might also be the issue with battery, charger or power outlet.  Try to use the charger in a different room on a different power outlet. Try to bypass the surge protector and connect it directly to power outlet.  Try to use an alternative charger if possible.  Try to turn on the computer without the charger and check it ( as long as the battery is not drained out )  

There are two alt keys on the keyboard. If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar. The alt key on the right side will be looking like alt, alt gr or alt car. Turn off the computer. Hold the alt key on the left and tap f10 continuously.  It will go to repair mode. It will show you chose an option, continue, troubleshoot.  If it is not going to repair mode, turn off the computer. Turn on the computer. Hold the right alt key ( alt gr or alt car or alt ) and then tap f10 continuously. It will go to chose an option continue and troubleshoot..

Please check whether it is working now..

padawanjesus

thanks for the response. i tried that but still no picture

William_mk2

@padawanjesus

It looks like a hardware issue.

Press and hold the on button. computer will turn off. Now try to restart the computer multiple times and check. Check whether you are getting the acer logo. .

We need to check whether the back light is working.

Try to flash the flash light on the screen after turning on the computer. If you dont see anything on the screen then you can try connecting the laptop to a external monitor and check.

If it is still not working then it looks like a hardware issue.

If your laptop is in warranty you can contact the warranty dept.   Go to the website support.acer.com - chose your country.  On the new page - scroll down - click on "contact support". Scroll down. You can find the phone no to contact the warranty dept. 

If it is out of warranty, please contact local store or

Go to the website support.acer.com - chose your country.  On the new page - scroll down - Click on "Repair My Acer" - Request to have your Acer product repaired.  There will be charges for repair. 

Additional info to contact Acer Store: Please visit the website - support.acer.com - chose your country - click on shop.  You can buy desktop, laptop, monitor and accessories. Alternatively, on the top right corner you can find the phone no to contact Acer store.  For the parts which are not available on Acer store, you have to contact local store.

ragsak28

Hi @padawanjesus

You can try to do a reset to check if that makes any difference.

https://support.microsoft.com/en-us/windows/recovery-options-in-windows-31ce2444-7de3-818c-d626-e3b5a3024da5#WindowsVersion=Windows_11

Check the above link to do a reset.

How Factory Reset Your PC using Acer Reset key

1. Press the Power key for 5 seconds to power off Acer computer completely. Then restart the computer and press Alt + F10 when its logo shows up.
2. Select Troubleshoot > Reset your PC.
3. Click Next, then select Just remove my files.
4. Press Reset to begin the recovery.

Check the above steps to do a reset.

NOTE: Make sure to backup all the data before the reset.

Hope it will help you in some way.