Replacing screen on Acer Aspire A515-43

CheeseBalls
CheeseBalls Member Posts: 1 New User

I am currently attempting to build a laptop where you can easily swap out screens, and I'm using an Aspire A515-43 for it. I was wondering if I could swap out the DC020035V00 cable for a 40 pin cable so that I could use a 1440p screen on the laptop. If so what cable could I use for that? If not, is there any other way to use a 1440p screen with this laptop, such as replacing the usb 2.0 module on the right with usb 3.0 and then converting that to HDMI, converting the HDMI to 40 pin and then running it back through the case? Thanks for any help.

Answers

  • JackE
    JackE ACE Posts: 44,873 Trailblazer

    If the board has a 40-pin socket, you could try the 40-pin video cable part no. 50.HEPN8.006.

    The problem with any of the USB ports is that they're all data-only. They don't natively support video output. Accordingly, they would have to have an active USB-to-video signal converter , not just a simple passive USB-to-video port form factor adapter. Unfortunately, even superspeed USB data only ports will never have the bandwidth available with a video signal converter to match the performance of the HDMI v1.4 port.

    Jack E/NJ