Acer laptop Acer Aspire 4752g Logo screen Stuck.

Bosz
Bosz Member Posts: 3 New User
edited July 2022 in Aspire Laptops
My old Acer Aspire 4752g stuck at this screen, If i even try to enter BIOS or change boot device, It will say "Pleas wait.. " and then nothing happen. Please help.



 { edited the title to add the model name ) 

Answers

  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    (1) Unplug charger.
    (2) Remove battery pack.
    (3) Press and hold power button for about a minute
    (4) Re-insert battery pack
    (5) Plug charger back in
    (6) Wait for battery charge LED to turn steady blue
    (7) Turn laptop on and IMMEDIATELY tap F2 key to enter BIOS menu. Don't  wait for ACER logo to appear
    (8) Make sure HDD is present in the BIOS Information tab
    (9) Press F9 to load BIOS defaults
    (10) Press F10 to save defaults and exit the BIOS menu.

    Jack E/NJ

  • Bosz
    Bosz Member Posts: 3 New User
    @JackE
    1.Thanks for trying to help me. I did what you said step by step. But it got the same result (in step 7th, I spam F2 button immediately after turn on laptop, It said "Please wait.. "like below image) I sat like 30-60 minutes but not BIOS menu shown up.
    2. Do I have to remove something called "CSOM battery"? I worried that I will break mainboard or something inside, Cause everytime I open the laptop screen It make weird crack sound because my laptop is very old
    3. What does step 3rd? do "I already did what you said but I just want to know"
    4. Don't mention my English grammar much If it's weird or something like that.
  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    The 3rd step is primarily to try to reset the BIOS chip and residual charges to avoid opening the laptop to remove the RTC or CMOS coin cell..

    Do you have a bootable Windows USB installation stick?

    Jack E/NJ

  • Bosz
    Bosz Member Posts: 3 New User
    edited July 2022
    @JackE
    No but i can borrow my friend
  • JackE
    JackE ACE Posts: 44,873 Trailblazer
    You can also make one using Microsoft's media creation tool.

    Jack E/NJ