Laptop frozen on boot screen with frozen loading circles

Hi! My Acer nitro laptop was overheating so I shut down it but mistakenly pressed Update and Shut Down and closed the lid. After some time, when I started my laptop, display was not working even on the external display after some time it booted on windows but it froze on loading circle in between.

I then installed Ubuntu and it luckily worked, but I didn't wanted to use Linux so I created a bootable drive and installed Windows 10 again, but still I got the same problem.

I then used advanced repair options and selected repair at startup but got an SrtTrail error. I am having problem again and again, Please help!

Specs:

Ryzen 5 3550H

GTX 1650 Mobile

16gb Ram (8x2)

Windows 11 (Before)

Accepted answers

William_mk2

c4_ez

If the computer goes to automatic repair – diagnosing your pc. If you see restart and advanced option

click on advanced options

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - advanced options

click on system restore – click on your account – type the password

chose an earlier date on which it was working fine. Click on finish and yes

Computer will load into windows..

If the system restore is not working please try the following steps

If the computer goes to automatic repair – diagnosing your pc. If you see restart and advanced option

click on advanced options

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - advanced options – chose startup settings – click on restart - It will show you a list of options. Please press no 5 on keyboard to go to safe mode with networking. It will go to login screen – type the password - It will show you the icons in safe mode. Now shutdown and restart the computer to regular mode.

If you are not able to go to safe mode with networking then please try the following steps..

If the computer goes to automatic repair – diagnosing your pc. If you see restart and advanced option

click on advanced options

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - click on reset this pc

click on keep my files ( only applications will be lost ) chose your account and type your password - click on local reinstall - click on reset

It will be in progress

If the keep my files option is not working

If the computer goes to automatic repair – diagnosing your pc. If you see restart and advanced option

click on advanced options

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset

It will reinstall windows.

You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10 or alt gr + tapping f10 on the keyboard while turning on the computer. Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.

All comments

William_mk2

@c4_ez

I am really sorry for the inconvenience.. Let us do the basic steps first..

Doing the power drain and bios defaults will really help. Kindly follow the steps given below:

Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, you can find a pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and – sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer. Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.

If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery. Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down. On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door. Just below that you can find a latch. If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer.

If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop. Hold the power button for 1 minute. After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn’t bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it’s internal statistics.

Connect all the cables back and restart the computer.

While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear. Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.

It might also be the issue with battery, charger or power outlet. Try to use the charger in a different room on a different power outlet. Try to bypass the surge protector and connect it directly to power outlet. Try to use an alternative charger if possible. Try to turn on the computer without the charger and check it ( as long as the battery is not drained out )

Try windows x

go to device manager

expand Battery

right click on all the items below battery – uninstall

Restart the computer

It should work fine..

William_mk2

c4_ez

If the computer goes to automatic repair – diagnosing your pc. If you see restart and advanced option

click on advanced options

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - advanced options

click on system restore – click on your account – type the password

chose an earlier date on which it was working fine. Click on finish and yes

Computer will load into windows..

If the system restore is not working please try the following steps

If the computer goes to automatic repair – diagnosing your pc. If you see restart and advanced option

click on advanced options

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - advanced options – chose startup settings – click on restart - It will show you a list of options. Please press no 5 on keyboard to go to safe mode with networking. It will go to login screen – type the password - It will show you the icons in safe mode. Now shutdown and restart the computer to regular mode.

If you are not able to go to safe mode with networking then please try the following steps..

If the computer goes to automatic repair – diagnosing your pc. If you see restart and advanced option

click on advanced options

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - click on reset this pc

click on keep my files ( only applications will be lost ) chose your account and type your password - click on local reinstall - click on reset

It will be in progress

If the keep my files option is not working

If the computer goes to automatic repair – diagnosing your pc. If you see restart and advanced option

click on advanced options

It will show you chose an option, continue, troubleshoot

Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset

It will reinstall windows.

You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10 or alt gr + tapping f10 on the keyboard while turning on the computer. Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.