How can I make that notebook Acer A515-51 recognize SSD as booteable?

glagomarsino
glagomarsino Member Posts: 8

Tinkerer

Recently I installed an SSD M2 WD Black 500Gb SN750 SE NVME in my Acer Aspire A 515-51. I followed a hard procedure for the BIOS to recognize the SSD. It's done, but it does not work.
it said:
Realtek PCIe GBE Family Controller Series v2.64 (11/20/15)
PXE-E61: Media test failure, check cable
.
PXE-M0F: Exiting PXE ROM.
No booteable device -- insert boot disk and press any key.

Any idea on how could I fix it? Thank you all in advance ;)

Answers

  • JackE
    JackE ACE Posts: 44,870 Trailblazer
    What did you use to migrate or clone the old Windows boot drive to the new SSD?

    Jack E/NJ

  • glagomarsino
    glagomarsino Member Posts: 8

    Tinkerer

    Hi Jack, once the SSD was installed, I copy on it Win 11 from an ISO image. I didn't use any software to migrate the old OS installed in the old mechanic HD.
  • JackE
    JackE ACE Posts: 44,870 Trailblazer
    You can't simply copy the iso installation image. It won't work that way.

    You must use Rufus freeware to convert the ISO file to a bootable USB installation thumbdrive. Then insert the thumbdrive. Turn on the laptop and immediately tap the F12 key to boot from the bootable USB installation thumbdrive. An installation menu should appear. Then follow directions on the menu to install Win10 on the SSD.

    Jack E/NJ

  • glagomarsino
    glagomarsino Member Posts: 8

    Tinkerer

    Hi Jack E/NJ. Thank you for your help. I did as you said.
    Almost everything was ok, but... Rufus didn't allow me to install Win11 in the SSD, but in the old HDD.
    So, the installation was successful but on the wrong device.
    So, how could I migrate the OS from the HDD to de SSD? or, how could make another installation of the Win11 in the SSD?
  • JackE
    JackE ACE Posts: 44,870 Trailblazer
    >>>Rufus didn't allow me to install Win11 in the SSD, but in the old HDD. >>>

    Boot from the HDD. Press WIN+R. Enter 'diskmgmt.msc'. Please post screenshot of result.

    Jack E/NJ

  • glagomarsino
    glagomarsino Member Posts: 8

    Tinkerer

    Dear JackE, thank you: this is what appared:


  • glagomarsino
    glagomarsino Member Posts: 8

    Tinkerer

    JackE,
    Disk 0 (D:) is the SSD (WD Black SN750 SE, M2)
    Disk 1 (C:) is the original HDD with 1TB
    Disk 2 (F:) is a USB 16GB formerly with Windows 11 zip/iso, from which I boot and installed Win 11 in unit C (instead of do it in unit D as I wanted)
  • JackE
    JackE ACE Posts: 44,870 Trailblazer
    Right click Disk0 properties. Click volume tab. If partition style is GPT, temporarily disconnect Disk1. Then try to re-install Win11 on the Disk0 by itself.



    Jack E/NJ

  • glagomarsino
    glagomarsino Member Posts: 8

    Tinkerer

    GUID (GPT) but. I could installed Win 11 in this SSD.
    I utilized "Macrium" to clone the OS from HDD to SSD. And... it works!
    Is not super fast. But I guess that is for Win 11, heavier than Win 10 (I guess)
    thanks a lot, JackiE