The Horn Like LEDs on my Case no longer show Blue/Pink/Purple Colours Orion 5000 [PO5-600s

Hello,
I recently lifted the Front Facia of my case to clear out the dust that had collected around the Fans, and even though I was careful to lift the Front off as to not tear any cables. the Horn Like lights on the front of the case no longer Show any blue Colours, and instead shows as Green.

I have tested other colours - Red, Green and Yellow colours work fine. But when I select any of the colours listed in the Subject Title, they don't function correctly:

- Blues shows up as tones of Green
- Purples/Pinks show as tones of Red

Is it likely I accidently Torn / Disconnected a segment of cable for this section of the case?

My PC is an Orion 5000 [PO5-600s] of 2020.

I am using Predator Sense to do make these changes - And this segment of Lighting was Functional before I lifted this area of the case.

(Thread was edited to add model name to the title)

Image: https://us.v-cdn.net/6029997/uploads/editor/u0/7idlip4dtjy8.jpg

Accepted answers

All comments

AnhEZ28

@AmyLucia if the cable is modular, maybe you can try to unplug and plug it in again. Or you can find someone that knows how to work with fixing wires.

billsey

There are four wires on the RGB connector, they are power for each of Red, Green and Blue, plus the return ground for all of them. It sounds like the Red isn't working, so either the wire has been pulled loose from the connector, has broken internally, or the connector isn't plugged in solidly, leaving the red disconnected.