fan case size for nitro n50-600 eb16

Terps
Terps Member Posts: 1 New User
Hi I was planning on adding more fans into my n50-600 eb16 but the problem is i don't know which size to get or even if i could install one. Couldn't find a single forum for this problem so any help would be appreciated.

Best Answer

  • StevenGen
    StevenGen ACE Posts: 12,165 Trailblazer
    Answer ✓
    Terps said:
    Hi I was planning on adding more fans into my n50-600 eb16 but the problem is i don't know which size to get or even if i could install one. Couldn't find a single forum for this problem so any help would be appreciated.
    At the back its a 120mm fan with 4 pins and you need a 2 way splitter to connect the fan to the same pin as the CPU fan connects to as there is no other pin for fans on the mobo, so check that out.

Answers

  • StevenGen
    StevenGen ACE Posts: 12,165 Trailblazer
    Answer ✓
    Terps said:
    Hi I was planning on adding more fans into my n50-600 eb16 but the problem is i don't know which size to get or even if i could install one. Couldn't find a single forum for this problem so any help would be appreciated.
    At the back its a 120mm fan with 4 pins and you need a 2 way splitter to connect the fan to the same pin as the CPU fan connects to as there is no other pin for fans on the mobo, so check that out.
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi @Terps,

    IIRC the mounting holes are either 80mm or 92mm so you could use either size.
  • CurtOz
    CurtOz Member Posts: 7

    Tinkerer

    I know this is an older post but I thought maybe someone could help.
    I installed a noctua NF-A8 PWM 80mm fan in the back of my case and plugged it into the 2nd fan spot on the motherboard. It doesn't work and there is nothing in the bios for it.
    Yes, if I use a y-splitter off the the cpu fan it'll work but I'm curious why it doesn't work when plugged directly into the 2nd fan spot on the motherboard.
    Hopefully someone's listening.
    Thanks
    ACER NITRO 50 UR11/I5-8400/8-1TB/1050/W10H