2021 Nitro 5 RAM running at 2933 instead of 3200 after upgrade

Hello, this is my first post here. I recently bought the Nitro 5 (AN515-57-55XN), it has an i5 11400H with GTX 1650 dedicated GPU. It came with 8 Gb of 3200mhz ram originally, and I wanted to upgrade it to 16gb. So I bought another ram stick, 8gb 3200mhz. I checked the CAS latency and made sure it matched (based off of other peoples review using CPUZ). Today the ram stick came in the mail and I installed it. However, after booting up it detected both 8gb sticks, but only ran at 2933mhz instead of 3200mhz. I have attached screenshots below. Any idea on how to fix this? (V-Gen stick is the new one, Micron was the one that came with the laptop)

Memory tab:

https://ibb.co/9gHMpjC
Original RAM:

https://ibb.co/RcrzB89
New RAM:

https://ibb.co/z7xF2VJ

Accepted answers

All comments

brummyfan2

Hi,
Give this a try and let us know if it helps:
Go to BIOS screen and move to Main tab, press F9 button, then press F10 button to Save&Exit.

William_mk2

@Arialflash

Please reseat the ram and check once again ...
Try ctrl + shift + esc - go to taskmanager - go to performance - memory and check speed..
Remove one of the memory..
Again Try ctrl + shift + esc - go to taskmanager - go to performance - memory and check speed..

Arialflash

brummyfan2 said:

Hi,
Give this a try and let us know if it helps:
Go to BIOS screen and move to Main tab, press F9 button, then press F10 button to Save&Exit.