Predator Sense Missing "Change Boot Logo option" PH315-54

jeremy46081
jeremy46081 Member Posts: 16 Troubleshooter
edited November 2021 in Predator Laptops
When i first got the laptop it had an option to change boot logo in predatorsense but now its missing. Is this because i updated the BIOS? Model No. is PH315-54


Answers

  • jeremy46081
    jeremy46081 Member Posts: 16 Troubleshooter
    Model No. is PH315-54
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited November 2021
    jeremy46081 most probably an update on which that feature was removed either bios or PS itself


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • Heliosi5RTX2060
    Heliosi5RTX2060 Member Posts: 6

    Tinkerer

    did you find any solution? i too have the same problem and im not able to change my boot logo. The option was right there in Predator sense but then it disappeared and now i'm not able to bring it back! if you find any solution, kindly ping me as well or just write it down here in the comments
  • Broe7788
    Broe7788 Member Posts: 2 New User
    I bought my ph315-54-760s a week or two ago. I just wanted to report my experience. As I set up the laptop and was checking it out, I noticed the custom boot logo option and was super intrigued by it. However, after getting everything set up and updated, by the end of it, the option was no longer available. It's super unfortunate they stripped that feature.
  • Kousei
    Kousei Member Posts: 13

    Tinkerer

    I FINALLY FOUND THE 100% WORKING INSTALLATION FOR CUSTOM BOOT ANIMATION FOR PREDATOR SENSE


    1. FIRST MAKE SURE IN THE BOOT MENU YOU ENABLE POST ANIMATION AND SOUND





    2. INSTALL PREDATOR SENSE FROM THE SUPPORT PAGE OF YOUR DEVICE





    3. RENAME YOUR WINDOWS INSTALLED DRIVE AS EFI

    ex:





    4. Change the registry value to 1 of Customize_POST_Support in Computer\HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PredatorSense





    4. Open CMD (command) as Admin and run the following commands (Right-click on it and "Run as Administrator"):

    C:\Windows\system32>diskpart

    Microsoft DiskPart version 10.0.22000.1

    Copyright (C) Microsoft Corporation.On computer: WTFPREDATOR


    (HERE SELECT THE DISK WHICH HAS YOUR WINDOWS RECOVERY INSTALLED, HERE IN MY CASE IT IS DISK 1)





    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> select partition 1

    Partition 1 is now the selected partition.

    DISKPART> assign letter=b

    DiskPart successfully assigned the drive letter or mount point.





    5. Download the explorer++ program from https://explorerplusplus.com/software/explorer++_1.3.5_x64.zip, here I used version 1.3.5_x64. Run it as ADMIN (Right click on it and click on "Run as Administrator");


    6. Locate drive B on the left inside the application and click on properties, and on the "General" tab put the drive name as ESP and click OK;


    7. Expand drive B >> EFI and inside the EFI folder and create a folder called OEM;





    8. Close everything and restart

  • Kousei
    Kousei Member Posts: 13

    Tinkerer

    I FINALLY FOUND THE 100% WORKING INSTALLATION FOR CUSTOM BOOT ANIMATION FOR PREDATOR SENSE


    1. FIRST MAKE SURE IN THE BOOT MENU YOU ENABLE POST ANIMATION AND SOUND





    2. INSTALL PREDATOR SENSE FROM THE SUPPORT PAGE OF YOUR DEVICE





    3. RENAME YOUR WINDOWS INSTALLED DRIVE AS EFI

    ex:





    4. Change the registry value to 1 of Customize_POST_Support in Computer\HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PredatorSense





    4. Open CMD (command) as Admin and run the following commands (Right-click on it and "Run as Administrator"):

    C:\Windows\system32>diskpart

    Microsoft DiskPart version 10.0.22000.1

    Copyright (C) Microsoft Corporation.On computer: WTFPREDATOR


    (HERE SELECT THE DISK WHICH HAS YOUR WINDOWS RECOVERY INSTALLED, HERE IN MY CASE IT IS DISK 1)





    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> select partition 1

    Partition 1 is now the selected partition.

    DISKPART> assign letter=b

    DiskPart successfully assigned the drive letter or mount point.





    5. Download the explorer++ program from https://explorerplusplus.com/software/explorer++_1.3.5_x64.zip, here I used version 1.3.5_x64. Run it as ADMIN (Right click on it and click on "Run as Administrator");


    6. Locate drive B on the left inside the application and click on properties, and on the "General" tab put the drive name as ESP and click OK;


    7. Expand drive B >> EFI and inside the EFI folder and create a folder called OEM;





    8. Close everything and restart

  • Kousei
    Kousei Member Posts: 13

    Tinkerer

    I FINALLY FOUND THE 100% WORKING INSTALLATION FOR CUSTOM BOOT ANIMATION FOR PREDATOR SENSE


    1. FIRST MAKE SURE IN THE BOOT MENU YOU ENABLE POST ANIMATION AND SOUND





    2. INSTALL PREDATOR SENSE FROM THE SUPPORT PAGE OF YOUR DEVICE





    3. RENAME YOUR WINDOWS INSTALLED DRIVE AS EFI

    ex:





    4. Change the registry value to 1 of Customize_POST_Support in Computer\HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PredatorSense





    4. Open CMD (command) as Admin and run the following commands (Right-click on it and "Run as Administrator"):

    C:\Windows\system32>diskpart

    Microsoft DiskPart version 10.0.22000.1

    Copyright (C) Microsoft Corporation.On computer: WTFPREDATOR


    (HERE SELECT THE DISK WHICH HAS YOUR WINDOWS RECOVERY INSTALLED, HERE IN MY CASE IT IS DISK 1)





    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> select partition 1

    Partition 1 is now the selected partition.

    DISKPART> assign letter=b

    DiskPart successfully assigned the drive letter or mount point.





    5. Download the explorer++ program from https://explorerplusplus.com/software/explorer++_1.3.5_x64.zip, here I used version 1.3.5_x64. Run it as ADMIN (Right click on it and click on "Run as Administrator");


    6. Locate drive B on the left inside the application and click on properties, and on the "General" tab put the drive name as ESP and click OK;


    7. Expand drive B >> EFI and inside the EFI folder and create a folder called OEM;





    8. Close everything and restart

  • Kousei
    Kousei Member Posts: 13

    Tinkerer

    I FINALLY FOUND THE 100% WORKING INSTALLATION FOR CUSTOM BOOT ANIMATION FOR PREDATOR SENSE


    1. FIRST MAKE SURE IN THE BOOT MENU YOU ENABLE POST ANIMATION AND SOUND





    2. INSTALL PREDATOR SENSE FROM THE SUPPORT PAGE OF YOUR DEVICE





    3. RENAME YOUR WINDOWS INSTALLED DRIVE AS EFI

    ex:





    4. Change the registry value to 1 of Customize_POST_Support in Computer\HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PredatorSense





    4. Open CMD (command) as Admin and run the following commands (Right-click on it and "Run as Administrator"):

    C:\Windows\system32>diskpart

    Microsoft DiskPart version 10.0.22000.1

    Copyright (C) Microsoft Corporation.On computer: WTFPREDATOR


    (HERE SELECT THE DISK WHICH HAS YOUR WINDOWS RECOVERY INSTALLED, HERE IN MY CASE IT IS DISK 1)





    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> select partition 1

    Partition 1 is now the selected partition.

    DISKPART> assign letter=b

    DiskPart successfully assigned the drive letter or mount point.





    5. Download the explorer++ program from https://explorerplusplus.com/software/explorer++_1.3.5_x64.zip, here I used version 1.3.5_x64. Run it as ADMIN (Right click on it and click on "Run as Administrator");


    6. Locate drive B on the left inside the application and click on properties, and on the "General" tab put the drive name as ESP and click OK;


    7. Expand drive B >> EFI and inside the EFI folder and create a folder called OEM;





    8. Close everything and restart

  • Kousei
    Kousei Member Posts: 13

    Tinkerer

    I FINALLY FOUND THE 100% WORKING INSTALLATION FOR CUSTOM BOOT ANIMATION FOR PREDATOR SENSE


    1. FIRST MAKE SURE IN THE BOOT MENU YOU ENABLE POST ANIMATION AND SOUND





    2. INSTALL PREDATOR SENSE FROM THE SUPPORT PAGE OF YOUR DEVICE





    3. RENAME YOUR WINDOWS INSTALLED DRIVE AS EFI

    ex:





    4. Change the registry value to 1 of Customize_POST_Support in Computer\HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PredatorSense





    4. Open CMD (command) as Admin and run the following commands (Right-click on it and "Run as Administrator"):

    C:\Windows\system32>diskpart

    Microsoft DiskPart version 10.0.22000.1

    Copyright (C) Microsoft Corporation.On computer: WTFPREDATOR


    (HERE SELECT THE DISK WHICH HAS YOUR WINDOWS RECOVERY INSTALLED, HERE IN MY CASE IT IS DISK 1)





    DISKPART> select disk 1

    Disk 1 is now the selected disk.

    DISKPART> select partition 1

    Partition 1 is now the selected partition.

    DISKPART> assign letter=b

    DiskPart successfully assigned the drive letter or mount point.





    5. Download the explorer++ program from https://explorerplusplus.com/software/explorer++_1.3.5_x64.zip, here I used version 1.3.5_x64. Run it as ADMIN (Right click on it and click on "Run as Administrator");


    6. Locate drive B on the left inside the application and click on properties, and on the "General" tab put the drive name as ESP and click OK;


    7. Expand drive B >> EFI and inside the EFI folder and create a folder called OEM;





    8. Close everything and restart

  • XdxD
    XdxD Member Posts: 1,584 Community Aficionado WiFi Icon

    5 times that was posted, lol.

    Trying to do my best here - Your happy Predator owner =)!