How can I fix my pc

Tshepiso
Tshepiso Member Posts: 1 New User
It's been preparing automatic repair for 2 days. I tried even alt + f10 but it's not working, it says wait and then turn blue after it switches of.

Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    (1) Press and hold power button till laptop shuts off.
    (2) Unplug charger. No LEDs should be lit.
    (3) Insert paper clip into reset pinhole on bottom for about a minute
    (4) Plug charger back in but wait till battery charge LED turns from steady orange to steady blue
    (5) Only after battery charge LED turns steady blue, turn laptop back on and immediately press the F2 key to enter the BIOS menu
    (6) Press F9 in the BIOS menu to load defaults. Press F10 to save defaults and exit the BIOS menu
    (7) Laptop should start Windows login normally or continue repair

    Jack E/NJ

  • Erick-Acer_Retired
    Erick-Acer_Retired Member Posts: 503 Seasoned Practitioner WiFi Icon
    Hi @ TshepisoCould you please tell me model name of unit 
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi @Tshepiso,

    # Try to get the BIOS page.
    1. Turn OFF the unit.
    ​2. Press and hold the F2 key and turn on the unit. 
    3. You will be in setup utility page. 
    4. Once you got the screen release the F2 key.
    5. Tap on F9 key and hit enter key without changing the option.
    6. Tap on F10 key and hit enter key without changing the option.
    7. Your unit will restart by itself. 

    Check this T/S and post the result. ​
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    (1) Press and hold power button till laptop shuts off.
    (2) Unplug charger. No LEDs should be lit.
    (3) Insert paper clip into reset pinhole on bottom for about a minute
    (4) Plug charger back in but wait till battery charge LED turns from steady orange to steady blue
    (5) Only after battery charge LED turns steady blue, turn laptop back on and immediately press the F2 key to enter the BIOS menu
    (6) Press F9 in the BIOS menu to load defaults. Press F10 to save defaults and exit the BIOS menu
    (7) Laptop should start Windows login normally or continue repair

    Jack E/NJ