Unable to power on my Acer Aspire AIO PC C27-1655

YSE1
YSE1 Member Posts: 2 New User
edited June 12 in Aspire Laptops
While using my Acer Aspire AIO PC C27-1655, the screen suddenly turns black. I tried to power on again, there was no response. Tried other power sockets also failed.  Can anyone help me please? Thank you so much!

Answers

  • billsey
    billsey ACE Posts: 33,965 Trailblazer
    Do you see any indication things are wanting to turn on? Hear fan noises or beeps?
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • StevenGen
    StevenGen ACE Posts: 11,956 Trailblazer
    YSE1 said:
    While using my Acer Aspire AIO PC C27-1655, the screen suddenly turns black. I tried to power on again, there was no response. Tried other power sockets also failed.  Can anyone help me please? Thank you so much!

    As billsey is saying are the fans working? Are there any lights on? As it could be an LCD failure or a power circuitry problem within the motherboard that needs to be diagnosed by a technician, give us more details as power problems especially cannot be fixed by a consumer!


  • YSE1
    YSE1 Member Posts: 2 New User
    When trying to switch on the PC, the blue power-on light shows but there is no beeping or fan sound. Tried pressing the power button again but there was no response and no sound. May I know what could be the cause of the problem? Thank you.
  • billsey
    billsey ACE Posts: 33,965 Trailblazer
    I'd guess the first step is to diagnose the power circuit. If the PSU has failed you might have enough juice to run the LED but not enough to run anything else. If you get no fan noise or beeps then it's not getting far enough to power any of that up, so we likely don't have to look at the software side of things.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • NoCoZ
    NoCoZ Member Posts: 2 New User

    Old thread I know but we have a customer to whom it happened twice on same model. We had to remove the CMOS battery and put it back in place in order for the system to reboot properly.

This discussion has been closed.