My laptop NVIDIA Graphic Card is not detcted A515-56G

Chandashoka123
Chandashoka123 Member Posts: 45 Troubleshooter
edited October 2021 in Aspire Laptops
After this update (insyde software firmware 5.42.1.17)  my Acer A515-56G laptop second graphic card(NVIDIA MX350) is not detected. and this update came from settings>windows update. And after this update I showed my bios are updated to V1.17 . Why my NVIDIA is not detected. Please help me

Best Answer

  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    edited October 2021 Answer ✓
    Chandashoka123

    I am really sorry for the inconvenience..   Let us do the basic steps first..

     

    Doing the power drain and bios defaults will really help.  Kindly follow the steps given below:


    Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and - sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

     

    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.   Hold the power button for 1 minute.  After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn't bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it's internal statistics.

     

    Connect all the cables back and restart the computer.  



    While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.   


    Please check whether it is working fine.. 


    It understand that this update came from settings>windows update. 


    Sometimes a simple system restore will fix the issue.. 

    Try windows x
    click on power shell admin or command prompt admin 
    type rstrui
    chose an earlier date on which your computer was working fine  
    click on next, finish, yes
    It will restore your computer to an earlier date 
    if you get an message - system restore not completed - click on close 
    It will show you all the icons..

    Try and check whether it is working now ..

     

    If it is a software issue on the computer then follow the steps given below:


    Try windows x 
    go to device manager 
    expand display adapter
    right click on display driver - uninstall 
    Restart the computer 

    It should work fine.. 

    If it is still not working 
    Uninstall the display adapter from device manager 
    Dont restart the computer. 
    Go to support.acer.com 
    chose your country 
    type snid or chose your model 
    go to drivers 
    Install the display driver 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

Answers

  • Chandashoka123
    Chandashoka123 Member Posts: 45 Troubleshooter
    After this update (insyde software firmware 5.42.1.17)  my Acer A515-56G laptop second graphic card(NVIDIA MX350) is not detected. and this update came from settings>windows update. And after this update I showed my bios are updated to V1.17 . Why my NVIDIA is not detected. Please help me
    It Seems like this when I open NVIDIA MX350
  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    edited October 2021 Answer ✓
    Chandashoka123

    I am really sorry for the inconvenience..   Let us do the basic steps first..

     

    Doing the power drain and bios defaults will really help.  Kindly follow the steps given below:


    Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and - sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

     

    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.   Hold the power button for 1 minute.  After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn't bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it's internal statistics.

     

    Connect all the cables back and restart the computer.  



    While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.   


    Please check whether it is working fine.. 


    It understand that this update came from settings>windows update. 


    Sometimes a simple system restore will fix the issue.. 

    Try windows x
    click on power shell admin or command prompt admin 
    type rstrui
    chose an earlier date on which your computer was working fine  
    click on next, finish, yes
    It will restore your computer to an earlier date 
    if you get an message - system restore not completed - click on close 
    It will show you all the icons..

    Try and check whether it is working now ..

     

    If it is a software issue on the computer then follow the steps given below:


    Try windows x 
    go to device manager 
    expand display adapter
    right click on display driver - uninstall 
    Restart the computer 

    It should work fine.. 

    If it is still not working 
    Uninstall the display adapter from device manager 
    Dont restart the computer. 
    Go to support.acer.com 
    chose your country 
    type snid or chose your model 
    go to drivers 
    Install the display driver 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • Chandashoka123
    Chandashoka123 Member Posts: 45 Troubleshooter
    Chandashoka123

    I am really sorry for the inconvenience..   Let us do the basic steps first..

     

    Doing the power drain and bios defaults will really help.  Kindly follow the steps given below:


    Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and - sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

     

    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.   Hold the power button for 1 minute.  After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn't bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it's internal statistics.

     

    Connect all the cables back and restart the computer.  



    While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.   


    Please check whether it is working fine.. 


    It understand that this update came from settings>windows update. 


    Sometimes a simple system restore will fix the issue.. 

    Try windows x
    click on power shell admin or command prompt admin 
    type rstrui
    chose an earlier date on which your computer was working fine  
    click on next, finish, yes
    It will restore your computer to an earlier date 
    if you get an message - system restore not completed - click on close 
    It will show you all the icons..

    Try and check whether it is working now ..

     

    If it is a software issue on the computer then follow the steps given below:


    Try windows x 
    go to device manager 
    expand display adapter
    right click on display driver - uninstall 
    Restart the computer 

    It should work fine.. 

    If it is still not working 
    Uninstall the display adapter from device manager 
    Dont restart the computer. 
    Go to support.acer.com 
    chose your country 
    type snid or chose your model 
    go to drivers 
    Install the display driver 
    Thankyou so much I restart my laptop then problem sloved. now my NVIDIA is working thankyou.
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Chandashoka123,

    Good to know thanks for your update.