Good day.. Acer Aspire ES 13 can i use it plugging without the battery. Battery has no use for me. I

Yayen
Yayen Member Posts: 2 New User
Good day.. Acer Aspire ES 13 can i use it plugging without the battery.
Battery has no use for me. It is full bat then after one hour already low battery.

Best Answers

  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    Answer ✓
    @Yayen


    Yes you can use the computer without the battery but the charger should always be plugged in.    You will not be able to use it as a portable unit. 


    We need to determine whether it is really a battery issue.. 

    Doing the power drain and bios defaults will really help.  Kindly follow the steps given below:


    Turn off the laptop. Disconnect or unplug  the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and - sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you dont find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug  the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed,  flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

     

    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt ) then please unplug all the cables and devices out of laptop.   Hold the power button for 1 minute.   Connect all the cables back and restart the computer.  



    While turning on the computer, tap f2. It  will go to bios. Press f9  once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.   

     

    It might also be the issue with battery, charger or power outlet.   Try to use the charger in a different room on a different power outlet.  Try to bypass the surge protector and connect it directly to power outlet.    Try to use an alternative charger if possible.    Try to turn on the computer without the charger and check it  ( as long as the battery is not drained out )  


    Connect the battery and check how the computer works with the battery connected.    Charge the battery completely and try to use it.  


    Try windows x 
    go to device manager 
    expand Battery
    right click on all the items below battery - uninstall 
    Restart the computer 


    It should work fine.. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Answer ✓
    Hi @Yayen,

    Yes, you can use the laptop without battery but it is better to change the battery asap.

Answers

  • Yayen
    Yayen Member Posts: 2 New User
    can someone help me please
  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    Answer ✓
    @Yayen


    Yes you can use the computer without the battery but the charger should always be plugged in.    You will not be able to use it as a portable unit. 


    We need to determine whether it is really a battery issue.. 

    Doing the power drain and bios defaults will really help.  Kindly follow the steps given below:


    Turn off the laptop. Disconnect or unplug  the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and - sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you dont find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug  the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed,  flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

     

    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt ) then please unplug all the cables and devices out of laptop.   Hold the power button for 1 minute.   Connect all the cables back and restart the computer.  



    While turning on the computer, tap f2. It  will go to bios. Press f9  once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.   

     

    It might also be the issue with battery, charger or power outlet.   Try to use the charger in a different room on a different power outlet.  Try to bypass the surge protector and connect it directly to power outlet.    Try to use an alternative charger if possible.    Try to turn on the computer without the charger and check it  ( as long as the battery is not drained out )  


    Connect the battery and check how the computer works with the battery connected.    Charge the battery completely and try to use it.  


    Try windows x 
    go to device manager 
    expand Battery
    right click on all the items below battery - uninstall 
    Restart the computer 


    It should work fine.. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Answer ✓
    Hi @Yayen,

    Yes, you can use the laptop without battery but it is better to change the battery asap.
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Best to replace the battery. Google search keywords 'your laptop model number (for example ES1-332)' & 'battery' for vendors who ship to your location. This battery is quite common, inexpensive and used in many different ACER laptop models. Brand new replacements are only about $30usd


    Jack E/NJ